Hamlib/rigs/prm80/prm8060.c

/*
 *  Hamlib PRM80 backend - PRM8060 description
 *  Copyright (c) 2010,2021 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>
#include <string.h>

#include "hamlib/rig.h"
#include "idx_builtin.h"
#include "prm80.h"


#define PRM8060_ALL_MODES (RIG_MODE_FM)

#define PRM8060_FUNC (RIG_FUNC_REV|RIG_FUNC_LOCK)

#define PRM8060_LEVEL_ALL (RIG_LEVEL_AF|RIG_LEVEL_SQL /* |RIG_LEVEL_RFPOWER */)

#define PRM8060_PARM_ALL (RIG_PARM_NONE)

// RIG_OP_FROM_VFO  RIG_OP_MCL ??
#define PRM8060_VFO_OPS (RIG_OP_NONE)

#define PRM8060_VFO (RIG_VFO_MEM)

/*
 * PRM 8060 rig capabilities.
 * http://prm80.sourceforge.net/
 * https://github.com/f4fez/prm80
 */
const struct rig_caps prm8060_caps =
{
    RIG_MODEL(RIG_MODEL_PRM8060),
    .model_name = "PRM8060",
    .mfg_name =  "Philips/Simoco",
    .version =  BACKEND_VER ".0",
    .copyright =  "LGPL",
    .status =  RIG_STATUS_BETA,
    .rig_type =  RIG_TYPE_TRANSCEIVER,
    .ptt_type =  RIG_PTT_NONE,
    .dcd_type =  RIG_DCD_NONE,
    .port_type =  RIG_PORT_SERIAL,
    .serial_rate_min =  4800,
    .serial_rate_max =  4800,
    .serial_data_bits =  7,
    .serial_stop_bits =  1,
    .serial_parity =  RIG_PARITY_EVEN,
    .serial_handshake =  RIG_HANDSHAKE_NONE,
    .write_delay =  0,
    .post_write_delay =  0,
    .timeout =  1000,
    .retry =  0,

    .has_get_func =  PRM8060_FUNC,
    .has_set_func =  PRM8060_FUNC,
    .has_get_level =  PRM8060_LEVEL_ALL | RIG_LEVEL_RFPOWER,
    .has_set_level =  RIG_LEVEL_SET(PRM8060_LEVEL_ALL),
    .has_get_parm =  PRM8060_PARM_ALL,
    .has_set_parm =  RIG_PARM_SET(PRM8060_PARM_ALL),
    .vfo_ops =  PRM8060_VFO_OPS,
    .preamp =   { RIG_DBLST_END },
    .attenuator =   { RIG_DBLST_END },
    .max_rit =  Hz(0),
    .max_xit =  Hz(0),
    .max_ifshift =  Hz(0),
    .targetable_vfo =  0,
    .transceive =  RIG_TRN_OFF,
    .bank_qty =   0,
    .chan_desc_sz =  0,

    .chan_list =  {
        {   0,  99, RIG_MTYPE_MEM, PRM80_MEM_CAP },
        RIG_CHAN_END,
    },

    .rx_range_list1 =  {
        {MHz(144), MHz(146) - kHz(12.5), PRM8060_ALL_MODES, -1, -1, PRM8060_VFO},
        RIG_FRNG_END,
    },
    .tx_range_list1 =  {
        {MHz(144), MHz(146) - kHz(12.5), PRM8060_ALL_MODES, W(5), W(25), PRM8060_VFO},
        RIG_FRNG_END,
    },
    .rx_range_list2 =  {
        {MHz(144), MHz(148) - kHz(12.5), PRM8060_ALL_MODES, -1, -1, PRM8060_VFO},
        RIG_FRNG_END,
    },
    .tx_range_list2 =  {
        {MHz(144), MHz(148) - kHz(12.5), PRM8060_ALL_MODES, W(5), W(25), PRM8060_VFO},
        RIG_FRNG_END,
    },
    .tuning_steps =  {
        {PRM8060_ALL_MODES, kHz(12.5)},
        RIG_TS_END,
    },
    /* mode/filter list, remember: order matters! */
    .filters =  {
        {PRM8060_ALL_MODES, kHz(12.5)},
        RIG_FLT_END,
    },

    .rig_init =   prm80_init,
    .rig_cleanup = prm80_cleanup,
    .get_mode =   prm80_get_mode,
    .set_freq =   prm80_set_freq,
    .get_freq =   prm80_get_freq,
    .set_split_vfo = prm80_set_split_vfo,
    .get_split_vfo = prm80_get_split_vfo,
    .set_split_freq = prm80_set_split_freq,
    .get_split_freq = prm80_get_split_freq,
    .set_channel =  prm80_set_channel,
    .get_channel =  prm80_get_channel,
    .set_mem =  prm80_set_mem,
    .get_mem =  prm80_get_mem,
    .set_func =  prm80_set_func,
    .get_func =  prm80_get_func,
    .set_level =  prm80_set_level,
    .get_level =  prm80_get_level,
    .reset =  prm80_reset,
    .get_info =  prm80_get_info,

};

/*
 * Function definitions below
 */