Hamlib/icom/icrx7.c

/*
 *  Hamlib CI-V backend - description of IC-RX7
 *  Copyright (c) 2011 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include "hamlib/rig.h"
#include "icom.h"
#include "idx_builtin.h"

#define ICRX7_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)

#define ICRX7_FUNC_ALL (RIG_FUNC_NONE)

#define ICRX7_LEVEL_ALL (RIG_LEVEL_RAWSTR)

#define ICRX7_VFO_ALL (RIG_VFO_A)

#define ICRX7_VFO_OPS (RIG_OP_NONE)
#define ICRX7_SCAN_OPS (RIG_SCAN_NONE)

/*
 * FIXME: S-meter measurement
 */
#define ICRX7_STR_CAL UNKNOWN_IC_STR_CAL

static const struct icom_priv_caps icrx7_priv_caps = {
		0x78,	/* default address */
		0,		/* 731 mode */
		r8500_ts_sc_list	/* wrong, but don't have set_ts anyway */
};

const struct rig_caps icrx7_caps = {
.rig_model =  RIG_MODEL_ICRX7,
.model_name = "IC-RX7",
.mfg_name =  "Icom",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_RECEIVER|RIG_FLAG_HANDHELD,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  300,
.serial_rate_max =  19200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3,
.has_get_func =  ICRX7_FUNC_ALL,
.has_set_func =  ICRX7_FUNC_ALL,
.has_get_level =  ICRX7_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(ICRX7_LEVEL_ALL),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,
.level_gran = {
	[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran =  {},
.ctcss_list =  NULL,
.dcs_list =  NULL,
.preamp =   { RIG_DBLST_END, },
.attenuator =   { RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.vfo_ops =  ICRX7_VFO_OPS,
.scan_ops =  ICRX7_SCAN_OPS,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
		   /* Unfortunately, not accessible through CI-V */
		   RIG_CHAN_END,
		},

.rx_range_list1 =   {
	{kHz(150),GHz(1.3),ICRX7_MODES,-1,-1,ICRX7_VFO_ALL},
	RIG_FRNG_END, },
.tx_range_list1 =   { RIG_FRNG_END, },

.rx_range_list2 =   {
	{kHz(150),MHz(821.995),ICRX7_MODES,-1,-1,ICRX7_VFO_ALL},
	{MHz(851),MHz(866.995),ICRX7_MODES,-1,-1,ICRX7_VFO_ALL},
	{MHz(896),GHz(1.3),ICRX7_MODES,-1,-1,ICRX7_VFO_ALL},
	RIG_FRNG_END, },
.tx_range_list2 =   { RIG_FRNG_END, },

.tuning_steps = 	{
	 {ICRX7_MODES,Hz(100)},
	 RIG_TS_END,
	},
.filters = 	{
		{RIG_MODE_AM|RIG_MODE_FM, kHz(15)},
		{RIG_MODE_WFM, kHz(150)},
		RIG_FLT_END,
	},
.str_cal = ICRX7_STR_CAL,

.cfgparams =  icom_cfg_params,
.set_conf =  icom_set_conf,
.get_conf =  icom_get_conf,

.priv =  (void*)&icrx7_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,	/* TODO: do not pass bandwidth data */
.get_mode =  icom_get_mode,

.decode_event =  icom_decode_event,
.get_level =  icom_get_level,
.get_dcd =  icom_get_dcd,

};