2007-10-05 04:19:18 +00:00
|
|
|
/*
|
|
|
|
* hamlib - (C) Frank Singleton 2000 (vk3fcs@ix.netcom.com)
|
|
|
|
*
|
|
|
|
* ft767gx.c - (C) Steve Conklin 2007
|
|
|
|
* adapted from ft757gx.c by Stephane Fillod 2004
|
|
|
|
* This shared library provides an API for communicating
|
|
|
|
* via serial interface to an FT-767GX using the "CAT" interface
|
|
|
|
* box (FIF-232C) or similar
|
|
|
|
*
|
|
|
|
*
|
2011-08-23 02:26:44 +00:00
|
|
|
* This library is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
* version 2.1 of the License, or (at your option) any later version.
|
2007-10-05 04:19:18 +00:00
|
|
|
*
|
2011-08-23 02:26:44 +00:00
|
|
|
* This library is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* Lesser General Public License for more details.
|
2007-10-05 04:19:18 +00:00
|
|
|
*
|
2011-08-23 02:26:44 +00:00
|
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
|
|
* License along with this library; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
2007-10-05 04:19:18 +00:00
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TODO
|
|
|
|
*
|
|
|
|
* 1. Allow cached reads
|
|
|
|
* 2. set_mem/get_mem, get_channel, set_split/get_split,
|
2019-11-30 16:19:08 +00:00
|
|
|
* set_func/get_func
|
2007-10-05 04:19:18 +00:00
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
|
|
#include "config.h"
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h> /* String function definitions */
|
|
|
|
#include <unistd.h> /* UNIX standard function definitions */
|
|
|
|
|
|
|
|
#include "hamlib/rig.h"
|
|
|
|
#include "serial.h"
|
|
|
|
#include "misc.h"
|
|
|
|
#include "yaesu.h"
|
|
|
|
#include "ft767gx.h"
|
|
|
|
|
|
|
|
|
|
|
|
static int ft767_init(RIG *rig);
|
|
|
|
static int ft767_cleanup(RIG *rig);
|
|
|
|
static int ft767_open(RIG *rig);
|
|
|
|
static int ft767_close(RIG *rig);
|
|
|
|
|
|
|
|
static int ft767_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
|
|
|
|
static int ft767_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
static int ft767_set_mode(RIG *rig, vfo_t vfo, rmode_t mode,
|
|
|
|
pbwidth_t width); /* select mode */
|
|
|
|
static int ft767_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode,
|
|
|
|
pbwidth_t *width); /* get mode */
|
2007-10-05 04:19:18 +00:00
|
|
|
|
|
|
|
static int ft767_set_vfo(RIG *rig, vfo_t vfo); /* select vfo */
|
|
|
|
static int ft767_get_vfo(RIG *rig, vfo_t *vfo); /* get vfo */
|
|
|
|
|
|
|
|
static int ft767_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt);
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
static int ft767_set_ctcss_tone(RIG *rig, vfo_t vfo, tone_t tone);
|
|
|
|
static int ft767_get_ctcss_tone(RIG *rig, vfo_t vfo, tone_t *tone);
|
|
|
|
static int ft767_set_ctcss_sql(RIG *rig, vfo_t vfo, tone_t tone);
|
|
|
|
static int ft767_get_ctcss_sql(RIG *rig, vfo_t vfo, tone_t *tone);
|
|
|
|
|
|
|
|
static int ft767_set_split_freq(RIG *rig, vfo_t vfo, freq_t tx_freq);
|
|
|
|
static int ft767_get_split_freq(RIG *rig, vfo_t vfo, freq_t *tx_freq);
|
|
|
|
static int ft767_set_split_mode(RIG *rig, vfo_t vfo, rmode_t tx_mode,
|
|
|
|
pbwidth_t tx_width);
|
|
|
|
static int ft767_get_split_mode(RIG *rig, vfo_t vfo, rmode_t *tx_mode,
|
|
|
|
pbwidth_t *tx_width);
|
|
|
|
static int ft767_set_split_vfo(RIG *rig, vfo_t vfo, split_t split,
|
|
|
|
vfo_t tx_vfo);
|
|
|
|
static int ft767_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split,
|
|
|
|
vfo_t *tx_vfo);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
|
|
|
/* Private helper function prototypes */
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
static int ft767_send_block_and_ack(RIG *rig, unsigned char *cmd,
|
|
|
|
size_t length);
|
2007-10-05 04:19:18 +00:00
|
|
|
static int ft767_get_update_data(RIG *rig);
|
|
|
|
static int ft767_enter_CAT(RIG *rig);
|
|
|
|
static int ft767_leave_CAT(RIG *rig);
|
|
|
|
static int ft767_set_split(RIG *rig, unsigned int split);
|
|
|
|
static unsigned char vfo2rig(RIG *rig, vfo_t vfo);
|
|
|
|
static vfo_t rig2vfo(unsigned char status);
|
|
|
|
static int mode2rig(RIG *rig, rmode_t mode);
|
|
|
|
static int rig2mode(RIG *rig, int md, rmode_t *mode, pbwidth_t *width);
|
2008-02-13 08:06:20 +00:00
|
|
|
/* static int ctcss2rig(RIG *rig, tone_t tone); */
|
2007-10-05 04:19:18 +00:00
|
|
|
static int rig2ctcss(RIG *rig, unsigned char tn, tone_t *tone);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* On the rig used by the author of this software, the values returned
|
|
|
|
* by the rig for the CTCSS tones are different than those in the Yaesu
|
|
|
|
* documentation. This could possibly be because he tone module in that
|
|
|
|
* rig is an aftermarket board sold by the piexx company. Leaving the
|
|
|
|
* following undefined uses the values discovered by experimentation. For
|
|
|
|
* The original values defined in the Yaesu documentation, uncomment it.
|
|
|
|
*/
|
|
|
|
/* #define USE_YAESU_PUBLISHED_TONES */
|
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
#define FT767GX_VFOS (RIG_VFO_A|RIG_VFO_B)
|
|
|
|
|
2007-10-05 04:19:18 +00:00
|
|
|
/* Valid command codes */
|
2019-11-30 16:19:08 +00:00
|
|
|
#define CMD_CAT_SW 0x00
|
|
|
|
#define CMD_CHECK 0x01
|
|
|
|
#define CMD_UP10HZ 0x02
|
|
|
|
#define CMD_DN10HZ 0x03
|
|
|
|
#define CMD_PROG_UP 0x04
|
|
|
|
#define CMD_PROG_DN 0x05
|
|
|
|
#define CMD_BAND_UP 0x06
|
|
|
|
#define CMD_BAND_DN 0x07
|
|
|
|
#define CMD_FREQ_SET 0x08
|
|
|
|
#define CMD_VFOMR 0x09
|
|
|
|
#define CMD_MULTICMD 0x0A /* This command code overloaded */
|
|
|
|
#define CMD_TONE_SET 0x0C
|
|
|
|
#define CMD_ACK 0x0B
|
2007-10-05 04:19:18 +00:00
|
|
|
|
|
|
|
/* subcommands for command code 0x0A */
|
|
|
|
/* values 0 - 9 select memories */
|
2019-11-30 16:19:08 +00:00
|
|
|
#define SUBCMD_MEM0 0x00 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MEM1 0x01 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MEM2 0x02 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MEM3 0x03 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MEM4 0x04 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MEM5 0x05 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MEM6 0x06 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MEM7 0x07 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MEM8 0x08 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MEM9 0x09 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MODE_LSB 0x10 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MODE_USB 0x11 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MODE_CW 0x12 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MODE_AM 0x13 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MODE_FM 0x14 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_MODE_FSK 0x15 /* 8 bytes returned */
|
|
|
|
#define SUBCMD_HG_HAM 0x20 /* ham coverage */
|
|
|
|
#define SUBCMD_HG_GEN 0x21 /* general coverage */
|
|
|
|
#define SUBCMD_SPLIT 0x30 /* toggle split */
|
|
|
|
#define SUBCMD_CLAR 0x40 /* toggle clarifier */
|
|
|
|
#define SUBCMD_MTOV 0x50 /* memory to VFO */
|
|
|
|
#define SUBCMD_VTOM 0x60 /* VFO to memory */
|
|
|
|
#define SUBCMD_SWAP 0x70 /* swap VFO, memory */
|
|
|
|
#define SUBCMD_ACLR 0x80 /* turn off SPLIT, CLAR< OFFSET */
|
2007-10-05 04:19:18 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Some useful offsets in the status update map (offset)
|
|
|
|
*
|
|
|
|
* Status Update Chart, FT767GXII
|
|
|
|
*/
|
2019-11-30 16:19:08 +00:00
|
|
|
#define STATUS_FLAGS 0
|
|
|
|
#define STATUS_CURR_FREQ 1 /* Operating Frequency */
|
|
|
|
#define STATUS_CURR_TONE 5
|
|
|
|
#define STATUS_CURR_MODE 6
|
|
|
|
#define STATUS_VFOA_FREQ 14
|
|
|
|
#define STATUS_VFOA_MODE 19
|
|
|
|
#define STATUS_VFOB_FREQ 20
|
|
|
|
#define STATUS_VFOB_MODE 25
|
2007-10-05 04:19:18 +00:00
|
|
|
|
|
|
|
/* Status bit masks */
|
2019-11-30 16:19:08 +00:00
|
|
|
#define STATUS_MASK_PTT 0x01
|
|
|
|
#define STATUS_MASK_HG 0x02
|
|
|
|
#define STATUS_MASK_TXINH 0x04
|
|
|
|
#define STATUS_MASK_SPLIT 0x08
|
|
|
|
#define STATUS_MASK_VFO 0x10
|
|
|
|
#define STATUS_MASK_MEM 0x20
|
|
|
|
#define STATUS_MASK_CLAR 0x40
|
|
|
|
#define STATUS_MASK_CAT 0x80
|
2007-10-05 04:19:18 +00:00
|
|
|
|
|
|
|
|
|
|
|
/* mode byte */
|
2019-11-30 16:19:08 +00:00
|
|
|
#define MODE_LSB 0x0
|
|
|
|
#define MODE_USB 0x1
|
|
|
|
#define MODE_CW 0x2
|
|
|
|
#define MODE_AM 0x3
|
|
|
|
#define MODE_FM 0x4
|
|
|
|
#define MODE_FSK 0x5
|
2007-10-05 04:19:18 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Things that I need to figure out how to fit in
|
|
|
|
*/
|
|
|
|
//#define VFO_OPERATIONS_LIST (RIG_OP_FROM_VFO | RIG_OP_TO_VFO | RIG_OP_TOGGLE)
|
|
|
|
/* These VFO OPS can only be applied to the current VFO */
|
2019-11-30 16:19:08 +00:00
|
|
|
// RIG_OP_UP = (1<<5), /*!< UP increment VFO freq by tuning step*/
|
|
|
|
// RIG_OP_DOWN = (1<<6), /*!< DOWN decrement VFO freq by tuning step*/
|
|
|
|
// RIG_OP_BAND_UP = (1<<7), /*!< Band UP */
|
2007-10-05 04:19:18 +00:00
|
|
|
|
|
|
|
/*
|
2019-11-30 16:19:08 +00:00
|
|
|
#define FT767_MEM_CAP { \
|
2007-10-05 04:19:18 +00:00
|
|
|
.freq = 1, \
|
|
|
|
.mode = 1, \
|
|
|
|
.width = 1,
|
|
|
|
.ctcss_tone = 1 \
|
|
|
|
}
|
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* End of things not put in yet
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
2011-08-23 02:26:44 +00:00
|
|
|
/*
|
|
|
|
* Receiver caps
|
2007-10-05 04:19:18 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
#define FT767GX_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_PKTFM)
|
|
|
|
#define FT767GX_HF_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB)
|
|
|
|
|
|
|
|
|
2011-08-23 02:26:44 +00:00
|
|
|
/*
|
2007-10-05 04:19:18 +00:00
|
|
|
* TX caps
|
2011-08-23 02:26:44 +00:00
|
|
|
*/
|
2007-10-05 04:19:18 +00:00
|
|
|
|
|
|
|
#define FT767GX_ALL_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_PKTFM)
|
|
|
|
#define FT767GX_HF_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB)
|
|
|
|
|
|
|
|
#define CTCSS_TONE_LIST \
|
|
|
|
670, 710, 747, 770, 797, 825, 854, 885, 915, 948, \
|
|
|
|
1000, 1035, 1072, 1109, 1148, 1188, 1230, 1273, 1318, 1365, \
|
|
|
|
1413, 1462, 1514, 1567, 1622, 1679, 1738, 1799, 1862, 1928, \
|
|
|
|
2035, 2107, 2181, 2257, 2336, 2418, 2503, 0
|
|
|
|
|
|
|
|
/*
|
|
|
|
* future - private data
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
struct ft767_priv_data
|
|
|
|
{
|
|
|
|
unsigned char pacing; /* pacing value */
|
|
|
|
unsigned int read_update_delay; /* depends on pacing value */
|
|
|
|
unsigned char
|
|
|
|
current_vfo; /* active VFO from last cmd , can be either RIG_VFO_A or RIG_VFO_B only */
|
|
|
|
unsigned char
|
|
|
|
update_data[FT767GX_STATUS_UPDATE_DATA_LENGTH]; /* returned data */
|
|
|
|
unsigned char rx_data[FT767GX_STATUS_UPDATE_DATA_LENGTH]; /* returned data */
|
|
|
|
unsigned char ack_cmd[5];
|
2007-10-05 04:19:18 +00:00
|
|
|
};
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
const tone_t static_767gx_ctcss_list[] =
|
|
|
|
{
|
|
|
|
CTCSS_TONE_LIST
|
2007-10-05 04:19:18 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ft767gx rigs capabilities.
|
|
|
|
* Also this struct is READONLY!
|
|
|
|
*/
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
const struct rig_caps ft767gx_caps =
|
|
|
|
{
|
2020-03-05 14:44:18 +00:00
|
|
|
RIG_MODEL(RIG_MODEL_FT767),
|
2019-11-30 16:19:08 +00:00
|
|
|
.model_name = "FT-767GX",
|
|
|
|
.mfg_name = "Yaesu",
|
2020-03-30 04:03:21 +00:00
|
|
|
.version = "20200325.0",
|
2019-11-30 16:19:08 +00:00
|
|
|
.copyright = "LGPL",
|
|
|
|
.status = RIG_STATUS_STABLE,
|
|
|
|
.rig_type = RIG_TYPE_TRANSCEIVER,
|
|
|
|
.ptt_type = RIG_PTT_RIG,
|
|
|
|
.dcd_type = RIG_DCD_NONE,
|
|
|
|
.port_type = RIG_PORT_SERIAL,
|
|
|
|
.serial_rate_min = 4800,
|
|
|
|
.serial_rate_max = 4800,
|
|
|
|
.serial_data_bits = 8,
|
|
|
|
.serial_stop_bits = 2,
|
|
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
|
|
.write_delay = FT767GX_WRITE_DELAY,
|
|
|
|
.post_write_delay = FT767GX_POST_WRITE_DELAY,
|
|
|
|
.timeout = 2000,
|
|
|
|
.retry = 0,
|
|
|
|
.has_get_func = RIG_FUNC_NONE,
|
|
|
|
.has_set_func = RIG_FUNC_NONE,
|
|
|
|
.has_get_level = RIG_LEVEL_NONE,
|
|
|
|
.has_set_level = RIG_LEVEL_NONE,
|
|
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
|
|
.has_set_parm = RIG_PARM_NONE,
|
|
|
|
.ctcss_list = static_767gx_ctcss_list,
|
|
|
|
.dcs_list = NULL,
|
|
|
|
.preamp = { RIG_DBLST_END, },
|
|
|
|
.attenuator = { RIG_DBLST_END, },
|
|
|
|
.max_rit = Hz(9999),
|
|
|
|
.max_xit = Hz(0),
|
|
|
|
.max_ifshift = Hz(0),
|
|
|
|
.targetable_vfo = 0,
|
|
|
|
.transceive = RIG_TRN_OFF,
|
|
|
|
.bank_qty = 0,
|
|
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = {RIG_CHAN_END, }, /* TODO need memory channel capabilities here */
|
|
|
|
// .chan_list = {0, 9, RIG_MTYPE_MEM, RIG_CHAN_END, }, /* TODO need memory channel capabilities here */
|
|
|
|
|
|
|
|
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
|
|
|
|
|
|
|
|
.tx_range_list1 = { RIG_FRNG_END, },
|
|
|
|
|
|
|
|
.rx_range_list2 = { {
|
|
|
|
.startf = kHz(100), .endf = 29999999,
|
|
|
|
.modes = FT767GX_ALL_RX_MODES, .low_power = -1, .high_power = -1
|
|
|
|
},
|
|
|
|
RIG_FRNG_END,
|
|
|
|
}, /* rx range */
|
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
.tx_range_list2 = { {kHz(1500), 1999900, FT767GX_HF_TX_MODES, .low_power = 5000, .high_power = 100000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
{.startf = kHz(3500), 3999900, FT767GX_HF_TX_MODES, 5000, 100000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
{.startf = kHz(7000), 7499900, FT767GX_HF_TX_MODES, 5000, 100000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
{.startf = MHz(10), 10499900, FT767GX_HF_TX_MODES, 5000, 100000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
{.startf = MHz(14), 14499900, FT767GX_HF_TX_MODES, 5000, 100000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
{.startf = MHz(18), 18499900, FT767GX_HF_TX_MODES, 5000, 100000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
{.startf = MHz(21), 21499900, FT767GX_HF_TX_MODES, 5000, 100000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
{.startf = kHz(24500), 24999900, FT767GX_HF_TX_MODES, 5000, 100000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
{.startf = MHz(28), 29999900, FT767GX_HF_TX_MODES, 5000, 100000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
{.startf = MHz(50), 59999900, FT767GX_ALL_TX_MODES, 5000, 10000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
{.startf = MHz(144), 147999900, FT767GX_ALL_TX_MODES, 5000, 10000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2020-03-26 04:07:42 +00:00
|
|
|
{.startf = MHz(430), 449999990, FT767GX_ALL_TX_MODES, 5000, 10000, FT767GX_VFOS, RIG_ANT_CURR},
|
2019-11-30 16:19:08 +00:00
|
|
|
|
|
|
|
RIG_FRNG_END,
|
|
|
|
},
|
|
|
|
|
|
|
|
|
|
|
|
.tuning_steps = {
|
|
|
|
{FT767GX_ALL_RX_MODES, 10},
|
|
|
|
{FT767GX_ALL_RX_MODES, 100},
|
|
|
|
RIG_TS_END,
|
|
|
|
},
|
|
|
|
|
|
|
|
/* mode/filter list, .remember = order matters! */
|
|
|
|
.filters = {
|
|
|
|
RIG_FLT_END,
|
|
|
|
},
|
|
|
|
|
|
|
|
|
|
|
|
.priv = NULL, /* private data */
|
|
|
|
|
|
|
|
.rig_init = ft767_init,
|
|
|
|
.rig_cleanup = ft767_cleanup,
|
|
|
|
.rig_open = ft767_open, /* port opened */
|
|
|
|
.rig_close = ft767_close, /* port closed */
|
|
|
|
|
|
|
|
.set_freq = ft767_set_freq, /* set freq */
|
|
|
|
.get_freq = ft767_get_freq, /* get freq */
|
|
|
|
.set_mode = ft767_set_mode, /* set mode */
|
|
|
|
.get_mode = ft767_get_mode, /* get mode */
|
|
|
|
.set_vfo = ft767_set_vfo, /* set vfo */
|
|
|
|
.get_vfo = ft767_get_vfo, /* get vfo */
|
|
|
|
.set_ptt = NULL, /* set ptt */
|
|
|
|
.get_ptt = ft767_get_ptt, /* get ptt */
|
|
|
|
|
|
|
|
.set_ctcss_tone = ft767_set_ctcss_tone,
|
|
|
|
.get_ctcss_tone = ft767_get_ctcss_tone,
|
|
|
|
.set_ctcss_sql = ft767_set_ctcss_sql,
|
|
|
|
.get_ctcss_sql = ft767_get_ctcss_sql,
|
|
|
|
|
|
|
|
.set_split_freq = ft767_set_split_freq,
|
|
|
|
.get_split_freq = ft767_get_split_freq,
|
|
|
|
.set_split_mode = ft767_set_split_mode,
|
|
|
|
.get_split_mode = ft767_get_split_mode,
|
|
|
|
.set_split_vfo = ft767_set_split_vfo,
|
|
|
|
.get_split_vfo = ft767_get_split_vfo,
|
2007-10-05 04:19:18 +00:00
|
|
|
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
2011-08-23 02:26:44 +00:00
|
|
|
* _init
|
2007-10-05 04:19:18 +00:00
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_init(RIG *rig)
|
|
|
|
{
|
2020-01-13 18:48:30 +00:00
|
|
|
struct ft767_priv_data *priv;
|
2019-11-30 16:19:08 +00:00
|
|
|
|
|
|
|
if (!rig)
|
|
|
|
{
|
|
|
|
return -RIG_EINVAL;
|
|
|
|
}
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2020-02-23 17:26:09 +00:00
|
|
|
rig->state.priv = (struct ft767_priv_data *) calloc(1,
|
|
|
|
sizeof(struct ft767_priv_data));
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2020-01-13 18:48:30 +00:00
|
|
|
if (!rig->state.priv) /* whoops! memory shortage! */
|
2019-11-30 16:19:08 +00:00
|
|
|
{
|
|
|
|
return -RIG_ENOMEM;
|
|
|
|
}
|
2020-02-23 17:26:09 +00:00
|
|
|
|
2020-01-13 18:48:30 +00:00
|
|
|
priv = rig->state.priv;
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
rig_debug(RIG_DEBUG_TRACE, "%s called\n", __func__);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* TODO: read pacing from preferences */
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2020-01-13 18:48:30 +00:00
|
|
|
priv->pacing = FT767GX_PACING_DEFAULT_VALUE; /* set pacing to minimum for now */
|
|
|
|
priv->read_update_delay =
|
2019-11-30 16:19:08 +00:00
|
|
|
FT767GX_DEFAULT_READ_TIMEOUT; /* set update timeout to safe value */
|
2020-01-13 18:48:30 +00:00
|
|
|
priv->current_vfo = RIG_VFO_A; /* default to VFO_A ? */
|
|
|
|
priv->ack_cmd[0] = 00;
|
|
|
|
priv->ack_cmd[1] = 00;
|
|
|
|
priv->ack_cmd[2] = 00;
|
|
|
|
priv->ack_cmd[3] = 00;
|
|
|
|
priv->ack_cmd[4] = 0x0B;
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ft767_cleanup routine
|
|
|
|
* the serial port is closed by the frontend
|
|
|
|
*/
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_cleanup(RIG *rig)
|
|
|
|
{
|
|
|
|
if (!rig)
|
|
|
|
{
|
|
|
|
return -RIG_EINVAL;
|
|
|
|
}
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
rig_debug(RIG_DEBUG_TRACE, "%s called\n", __func__);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (rig->state.priv)
|
|
|
|
{
|
|
|
|
free(rig->state.priv);
|
|
|
|
}
|
|
|
|
|
|
|
|
rig->state.priv = NULL;
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ft767_open routine
|
2011-08-23 02:26:44 +00:00
|
|
|
*
|
2007-10-05 04:19:18 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
int ft767_open(RIG *rig)
|
|
|
|
{
|
2019-11-30 16:19:08 +00:00
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
|
|
|
|
2020-06-23 14:01:46 +00:00
|
|
|
rig_flush(&rig->state.rigport);
|
2019-11-30 16:19:08 +00:00
|
|
|
|
|
|
|
/* send 0 delay PACING cmd to rig */
|
|
|
|
retval = ft767_enter_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: enter_CAT %d\n", __func__, retval);
|
|
|
|
memset(priv->update_data, 0, FT767GX_STATUS_UPDATE_DATA_LENGTH);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_leave_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: leave_CAT %d\n", __func__, retval);
|
|
|
|
memset(priv->update_data, 0, FT767GX_STATUS_UPDATE_DATA_LENGTH);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
rig->state.vfo_list = RIG_VFO_A | RIG_VFO_B;
|
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ft767_close routine
|
2011-08-23 02:26:44 +00:00
|
|
|
*
|
2007-10-05 04:19:18 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
int ft767_close(RIG *rig)
|
|
|
|
{
|
2020-06-23 14:01:46 +00:00
|
|
|
rig_flush(&rig->state.rigport);
|
2019-11-30 16:19:08 +00:00
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This command only functions when operating on a vfo.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
int ft767_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
|
|
|
|
{
|
2019-11-30 16:19:08 +00:00
|
|
|
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_FREQ_SET};
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
/* should the vfo be tested? */
|
|
|
|
/* fill in first four bytes */
|
|
|
|
to_bcd(cmd, freq / 10, 8);
|
|
|
|
|
|
|
|
retval = ft767_enter_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: enter_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_leave_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: leave_CAT %d\n", __func__, retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
return retval;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int ft767_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
|
|
|
|
{
|
2019-11-30 16:19:08 +00:00
|
|
|
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_MULTICMD};
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
/* fill in p1 */
|
|
|
|
cmd[3] = mode2rig(rig, mode);
|
|
|
|
|
|
|
|
retval = ft767_enter_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: enter_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_leave_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: leave_CAT %d\n", __func__, retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
return retval;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Return Freq
|
|
|
|
*/
|
|
|
|
|
|
|
|
int ft767_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
|
|
|
|
{
|
2019-11-30 16:19:08 +00:00
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* grab freq and convert */
|
|
|
|
|
|
|
|
switch (vfo)
|
|
|
|
{
|
|
|
|
case RIG_VFO_CURR:
|
|
|
|
*freq = from_bcd_be(priv->update_data + STATUS_CURR_FREQ, 8);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_A:
|
|
|
|
*freq = from_bcd_be(priv->update_data + STATUS_VFOA_FREQ, 8);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_B:
|
|
|
|
*freq = from_bcd_be(priv->update_data + STATUS_VFOB_FREQ, 8);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -RIG_EINVAL; /* sorry, wrong VFO */
|
|
|
|
}
|
|
|
|
|
|
|
|
*freq *= 10.0; /* rig reads in 10 Hz increments*/
|
|
|
|
|
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
int ft767_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
|
|
|
|
{
|
2019-11-30 16:19:08 +00:00
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (vfo)
|
|
|
|
{
|
|
|
|
case RIG_VFO_CURR:
|
|
|
|
retval = rig2mode(rig, priv->update_data[STATUS_CURR_MODE], mode, width);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_A:
|
|
|
|
retval = rig2mode(rig, priv->update_data[STATUS_VFOA_MODE], mode, width);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_B:
|
|
|
|
retval = rig2mode(rig, priv->update_data[STATUS_VFOB_MODE], mode, width);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -RIG_EINVAL; /* sorry, wrong VFO */
|
|
|
|
}
|
|
|
|
|
|
|
|
return retval;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* set vfo and store requested vfo for later RIG_VFO_CURR
|
|
|
|
* requests.
|
|
|
|
*
|
|
|
|
*/
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_set_vfo(RIG *rig, vfo_t vfo)
|
|
|
|
{
|
|
|
|
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_VFOMR};
|
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
switch (vfo)
|
|
|
|
{
|
|
|
|
case RIG_VFO_CURR:
|
|
|
|
return RIG_OK;
|
|
|
|
|
|
|
|
case RIG_VFO_A:
|
|
|
|
cmd[3] = 0x00;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_B:
|
|
|
|
cmd[3] = 0x01;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -RIG_EINVAL; /* sorry, wrong VFO */
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->current_vfo = vfo;
|
|
|
|
|
|
|
|
retval = ft767_enter_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: enter_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_leave_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: leave_CAT %d\n", __func__, retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
return retval;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_get_vfo(RIG *rig, vfo_t *vfo)
|
|
|
|
{
|
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
return retval;
|
|
|
|
}
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
*vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int ft767_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt)
|
|
|
|
{
|
2019-11-30 16:19:08 +00:00
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
2019-12-24 16:07:48 +00:00
|
|
|
*ptt = (priv->update_data[STATUS_FLAGS] & 0x01) ? RIG_PTT_ON : RIG_PTT_OFF;
|
2019-11-30 16:19:08 +00:00
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* on this rig, only one tone can be set per VFO or memory,
|
|
|
|
* and it's active for both tx and receive.
|
|
|
|
*/
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_set_ctcss_tone(RIG *rig, vfo_t vfo, tone_t tone)
|
|
|
|
{
|
|
|
|
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_TONE_SET};
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
/* determine whether we have to send high-Q */
|
|
|
|
switch (tone)
|
|
|
|
{
|
|
|
|
case 747:
|
|
|
|
case 797:
|
|
|
|
case 854:
|
|
|
|
case 915:
|
|
|
|
cmd[1] = 1; /* High Q */
|
|
|
|
break;
|
|
|
|
|
|
|
|
default: break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* fill in p2 and p1 with bcd tone value */
|
|
|
|
to_bcd(&cmd[2], tone, 4);
|
|
|
|
|
|
|
|
/* cmd[3] = tone2rig(rig, tone); */
|
|
|
|
|
|
|
|
retval = ft767_enter_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: enter_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_leave_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: leave_CAT %d\n", __func__, retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
return retval;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_get_ctcss_tone(RIG *rig, vfo_t vfo, tone_t *tone)
|
|
|
|
{
|
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: get_update_data failed with status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = rig2ctcss(rig, priv->update_data[STATUS_CURR_TONE], tone);
|
2007-10-05 04:19:18 +00:00
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_set_ctcss_sql(RIG *rig, vfo_t vfo, tone_t tone)
|
|
|
|
{
|
|
|
|
return ft767_set_ctcss_tone(rig, vfo, tone);
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_get_ctcss_sql(RIG *rig, vfo_t vfo, tone_t *tone)
|
|
|
|
{
|
|
|
|
return ft767_get_ctcss_tone(rig, vfo, tone);
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* split functions */
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_set_split_freq(RIG *rig, vfo_t vfo, freq_t tx_freq)
|
|
|
|
{
|
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
unsigned char freq_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_FREQ_SET};
|
|
|
|
unsigned char vfo_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_VFOMR};
|
|
|
|
vfo_t curr_vfo;
|
|
|
|
vfo_t change_vfo;
|
|
|
|
unsigned char curr_split;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
/* This appears to always pass in VFO_CURR as the vfo */
|
|
|
|
/* My decision is to only update the xmit VFO if we're in split mode */
|
|
|
|
|
|
|
|
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
return retval;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* find out how we're currently configured */
|
|
|
|
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
|
|
|
|
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (curr_split)
|
|
|
|
{
|
|
|
|
switch (curr_vfo)
|
|
|
|
{
|
|
|
|
/* we need to set something */
|
|
|
|
case RIG_VFO_A:
|
|
|
|
change_vfo = RIG_VFO_B;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_B:
|
|
|
|
change_vfo = RIG_VFO_A;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_MEM:
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: error, in both split and memory modes\n",
|
|
|
|
__func__);
|
|
|
|
return RIG_OK;
|
|
|
|
|
|
|
|
default:
|
2020-03-23 12:52:01 +00:00
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: error, unknown vfo value %s\n", __func__,
|
|
|
|
rig_strvfo(curr_vfo));
|
2019-11-30 16:19:08 +00:00
|
|
|
return RIG_OK;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
/* not in split mode, do nothing */
|
|
|
|
return RIG_OK;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* fill in first four bytes */
|
|
|
|
to_bcd(freq_cmd, tx_freq / 10, 8);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
retval = ft767_enter_CAT(rig);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: enter_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* change to the xmit VFO */
|
|
|
|
vfo_cmd[3] = vfo2rig(rig, change_vfo);
|
|
|
|
retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* change the freq */
|
|
|
|
retval = ft767_send_block_and_ack(rig, freq_cmd, YAESU_CMD_LENGTH);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* change back to the rcv VFO */
|
|
|
|
vfo_cmd[3] = vfo2rig(rig, curr_vfo);
|
|
|
|
retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
retval = ft767_leave_CAT(rig);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: leave_CAT %d\n", __func__, retval);
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2007-10-05 04:19:18 +00:00
|
|
|
return RIG_OK;
|
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_get_split_freq(RIG *rig, vfo_t vfo, freq_t *tx_freq)
|
|
|
|
{
|
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
|
|
|
unsigned int offset;
|
|
|
|
vfo_t curr_vfo;
|
|
|
|
unsigned char curr_split;
|
|
|
|
|
|
|
|
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: get_update_data failed with status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
|
|
|
|
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (curr_split)
|
|
|
|
{
|
|
|
|
switch (curr_vfo)
|
|
|
|
{
|
|
|
|
/* we need to get something */
|
|
|
|
case RIG_VFO_A:
|
|
|
|
offset = STATUS_VFOB_FREQ;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_B:
|
|
|
|
offset = STATUS_VFOA_FREQ;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_MEM:
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: error, in both split and memory modes\n",
|
|
|
|
__func__);
|
|
|
|
return RIG_OK;
|
|
|
|
|
|
|
|
default:
|
2020-03-23 12:52:01 +00:00
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: error, unknown vfo value %s\n", __func__,
|
|
|
|
rig_strvfo(curr_vfo));
|
2019-11-30 16:19:08 +00:00
|
|
|
return RIG_OK;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
2019-11-30 16:19:08 +00:00
|
|
|
else
|
|
|
|
{
|
|
|
|
/* not in split mode, do nothing */
|
|
|
|
return RIG_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
*tx_freq = from_bcd_be(priv->update_data + offset, 8);
|
|
|
|
|
2007-10-05 04:19:18 +00:00
|
|
|
return RIG_OK;
|
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_set_split_mode(RIG *rig, vfo_t vfo, rmode_t tx_mode,
|
|
|
|
pbwidth_t tx_width)
|
|
|
|
{
|
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
unsigned char mode_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_MULTICMD};
|
|
|
|
unsigned char vfo_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_VFOMR};
|
|
|
|
vfo_t curr_vfo;
|
|
|
|
vfo_t change_vfo;
|
|
|
|
unsigned char curr_split;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
/* This appears to always pass in VFO_CURR as the vfo */
|
|
|
|
/* My decision is to only update the xmit mode if we're in split mode */
|
|
|
|
|
|
|
|
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
return retval;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* find out how we're currently configured */
|
|
|
|
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
|
|
|
|
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (curr_split)
|
|
|
|
{
|
|
|
|
switch (curr_vfo)
|
|
|
|
{
|
|
|
|
/* we need to set something */
|
|
|
|
case RIG_VFO_A:
|
|
|
|
change_vfo = RIG_VFO_B;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_B:
|
|
|
|
change_vfo = RIG_VFO_A;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_MEM:
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: error, in both split and memory modes\n",
|
|
|
|
__func__);
|
|
|
|
return RIG_OK;
|
|
|
|
|
|
|
|
default:
|
2020-03-23 12:52:01 +00:00
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: error, unknown vfo value %s\n", __func__,
|
|
|
|
rig_strvfo(curr_vfo));
|
2019-11-30 16:19:08 +00:00
|
|
|
return RIG_OK;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
/* not in split mode, do nothing */
|
|
|
|
return RIG_OK;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* fill in p1 */
|
|
|
|
mode_cmd[3] = mode2rig(rig, tx_mode);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
retval = ft767_enter_CAT(rig);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: enter_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* change to the xmit VFO */
|
|
|
|
vfo_cmd[3] = vfo2rig(rig, change_vfo);
|
|
|
|
retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send vfo change 1 command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* change the mode */
|
|
|
|
retval = ft767_send_block_and_ack(rig, mode_cmd, YAESU_CMD_LENGTH);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send mode command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* change back to the rcv VFO */
|
|
|
|
vfo_cmd[3] = vfo2rig(rig, curr_vfo);
|
|
|
|
retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send vfo change 2command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2007-10-05 04:19:18 +00:00
|
|
|
retval = ft767_leave_CAT(rig);
|
2019-11-30 16:19:08 +00:00
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: leave_CAT %d\n", __func__, retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_get_split_mode(RIG *rig, vfo_t vfo, rmode_t *tx_mode,
|
|
|
|
pbwidth_t *tx_width)
|
|
|
|
{
|
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
|
|
|
unsigned int offset;
|
|
|
|
vfo_t curr_vfo;
|
|
|
|
unsigned char curr_split;
|
|
|
|
|
|
|
|
retval = ft767_get_update_data(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: get_update_data failed with status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
|
|
|
|
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
|
|
|
|
|
|
|
|
if (curr_split)
|
|
|
|
{
|
|
|
|
switch (curr_vfo)
|
|
|
|
{
|
|
|
|
/* we need to get something */
|
|
|
|
case RIG_VFO_A:
|
|
|
|
offset = STATUS_VFOB_MODE;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_B:
|
|
|
|
offset = STATUS_VFOA_MODE;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_MEM:
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: error, in both split and memory modes\n",
|
|
|
|
__func__);
|
|
|
|
return RIG_OK;
|
|
|
|
|
|
|
|
default:
|
2020-03-23 12:52:01 +00:00
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: error, unknown vfo value %s\n", __func__,
|
|
|
|
rig_strvfo(curr_vfo));
|
2019-11-30 16:19:08 +00:00
|
|
|
return RIG_OK;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
/* not in split mode, do nothing */
|
|
|
|
return RIG_OK;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* get the actual mode */
|
|
|
|
retval = rig2mode(rig, priv->update_data[offset], tx_mode, tx_width);
|
2007-10-05 04:19:18 +00:00
|
|
|
return retval;
|
2019-11-30 16:19:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int ft767_set_split_vfo(RIG *rig, vfo_t vfo, split_t split, vfo_t tx_vfo)
|
|
|
|
{
|
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x00};
|
|
|
|
int retval;
|
|
|
|
vfo_t curr_vfo;
|
|
|
|
vfo_t future_vfo;
|
|
|
|
unsigned char curr_split;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
|
|
|
|
|
|
|
|
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
|
|
|
|
rig_debug(RIG_DEBUG_TRACE, "%s: passed tx_vfo = 0x%02x\n", __func__, tx_vfo);
|
|
|
|
rig_debug(RIG_DEBUG_TRACE, "%s: passed split = 0x%02x\n", __func__, split);
|
|
|
|
|
|
|
|
if ((tx_vfo != RIG_VFO_A) && (tx_vfo != RIG_VFO_B))
|
|
|
|
{
|
|
|
|
return -RIG_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* find out which VFO we're currently using */
|
|
|
|
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If split is enabled, Set the current VFO to the opposite of
|
|
|
|
* the one specified in tx_vfo. If split is not enabled, then don't change anything.
|
|
|
|
*/
|
|
|
|
|
|
|
|
switch (split)
|
|
|
|
{
|
|
|
|
case RIG_SPLIT_OFF:
|
|
|
|
/* turn off split, leave everything else alone */
|
|
|
|
return ft767_set_split(rig, 0);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_SPLIT_ON:
|
|
|
|
switch (tx_vfo)
|
|
|
|
{
|
|
|
|
case RIG_VFO_CURR:
|
|
|
|
|
|
|
|
// we need to switch VFOs
|
|
|
|
if (curr_vfo == RIG_VFO_A)
|
|
|
|
{
|
|
|
|
future_vfo = RIG_VFO_B;
|
|
|
|
}
|
|
|
|
else if (curr_vfo == RIG_VFO_B)
|
|
|
|
{
|
|
|
|
future_vfo = RIG_VFO_B;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
/* Currently using memory! */
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: RIG_VFO_CURR requested when it is a memory\n",
|
|
|
|
__func__);
|
|
|
|
return -RIG_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_A:
|
|
|
|
future_vfo = RIG_VFO_B;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_B:
|
|
|
|
future_vfo = RIG_VFO_A;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -RIG_EINVAL; /* sorry, wrong VFO */
|
|
|
|
}
|
|
|
|
|
2020-06-23 14:01:46 +00:00
|
|
|
rig_flush(&rig->state.rigport);
|
2019-11-30 16:19:08 +00:00
|
|
|
|
|
|
|
retval = ft767_enter_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: enter_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* See whether we need to toggle the split state */
|
|
|
|
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
|
|
|
|
|
|
|
|
if (curr_split) { curr_split = RIG_SPLIT_ON; }
|
|
|
|
|
|
|
|
if (curr_split != split)
|
|
|
|
{
|
|
|
|
cmd[3] = SUBCMD_SPLIT;
|
|
|
|
cmd[4] = CMD_MULTICMD;
|
|
|
|
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send split command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* now set the rx vfo if needed */
|
|
|
|
if (curr_vfo != future_vfo)
|
|
|
|
{
|
|
|
|
cmd[3] = vfo2rig(rig, future_vfo);
|
|
|
|
cmd[4] = CMD_VFOMR;
|
|
|
|
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send set vfo command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Make sure clarifier is off */
|
|
|
|
if (priv->update_data[STATUS_FLAGS] & STATUS_MASK_CLAR)
|
|
|
|
{
|
|
|
|
cmd[3] = SUBCMD_CLAR;
|
|
|
|
cmd[4] = CMD_MULTICMD;
|
|
|
|
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send set clar command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_leave_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: leave_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -RIG_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return RIG_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
int ft767_get_split_vfo(RIG *rig, vfo_t vfo, split_t *split, vfo_t *tx_vfo)
|
|
|
|
{
|
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
|
|
|
vfo_t curr_vfo;
|
|
|
|
|
|
|
|
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: get_update_data failed with status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* TODO if SPLIT is enabled, return which VFO is the transmit VFO!!
|
|
|
|
*/
|
|
|
|
|
|
|
|
if (priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT)
|
|
|
|
{
|
|
|
|
*split = RIG_SPLIT_ON;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
*split = RIG_SPLIT_OFF;
|
|
|
|
}
|
|
|
|
|
|
|
|
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
|
|
|
|
|
|
|
|
switch (curr_vfo)
|
|
|
|
{
|
|
|
|
case RIG_VFO_A:
|
|
|
|
*tx_vfo = RIG_VFO_B;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_B:
|
|
|
|
*tx_vfo = RIG_VFO_A;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
/* we don't know how to deal with MEM, anything else is an error */
|
|
|
|
/* TODO make sure this is what we want to do here */
|
2020-03-23 12:52:01 +00:00
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: current vfo is %s with split\n", __func__,
|
|
|
|
rig_strvfo(curr_vfo));
|
2019-11-30 16:19:08 +00:00
|
|
|
return -RIG_EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* End of hamlib API-mapped functions */
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function puts the radio in CAT mode
|
|
|
|
*/
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_enter_CAT(RIG *rig)
|
|
|
|
{
|
|
|
|
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_CAT_SW};
|
|
|
|
rig_debug(RIG_DEBUG_TRACE, "%s: Entered\n", __func__);
|
|
|
|
return ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function takes the radio out of CAT mode
|
|
|
|
*/
|
2019-11-30 16:19:08 +00:00
|
|
|
int ft767_leave_CAT(RIG *rig)
|
|
|
|
{
|
|
|
|
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x01, CMD_CAT_SW};
|
|
|
|
rig_debug(RIG_DEBUG_TRACE, "%s: Entered\n", __func__);
|
|
|
|
return ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The Yaesu interface is convoluted and braindead.
|
|
|
|
*
|
|
|
|
* Private helper function. The 767GX has a handshaking system that works like this:
|
|
|
|
*
|
|
|
|
* 5 byte command block sent to rig
|
|
|
|
* (5 to 20 mS delay)
|
|
|
|
* Rig echos 5 byte command block back
|
|
|
|
* Send a 5 byte ACK block to the rig
|
|
|
|
* (5 to 20 mS delay)
|
|
|
|
*
|
|
|
|
* Rig sends back a status update block (5-86 bytes)
|
|
|
|
* The status update block is received in reverse byte order from the way it's structured
|
|
|
|
*
|
|
|
|
* In addition, You must send a command to enable CAT mode, and disable when done.
|
|
|
|
* When in CAT mode, the front panel of the radio is locked out.
|
|
|
|
*
|
|
|
|
* There is an error in the manual, the response length for a TONE SET command
|
|
|
|
* is 26 bytes, not 5.
|
|
|
|
*/
|
|
|
|
|
|
|
|
int ft767_send_block_and_ack(RIG *rig, unsigned char *cmd, size_t length)
|
|
|
|
{
|
2019-11-30 16:19:08 +00:00
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
size_t replylen, cpycnt;
|
|
|
|
unsigned char cmd_echo_buf[5];
|
|
|
|
int retval;
|
|
|
|
unsigned char *src, *dst;
|
|
|
|
|
|
|
|
/* Validate command and set length of data returned */
|
|
|
|
switch (cmd[4])
|
|
|
|
{
|
|
|
|
case CMD_CHECK:
|
|
|
|
case CMD_CAT_SW:
|
|
|
|
replylen = 86;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case CMD_UP10HZ:
|
|
|
|
case CMD_DN10HZ:
|
|
|
|
case CMD_PROG_UP:
|
|
|
|
case CMD_PROG_DN:
|
|
|
|
case CMD_BAND_UP:
|
|
|
|
case CMD_BAND_DN:
|
|
|
|
case CMD_FREQ_SET:
|
|
|
|
case CMD_VFOMR:
|
|
|
|
case CMD_ACK:
|
|
|
|
replylen = 5;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case CMD_TONE_SET:
|
|
|
|
replylen = 26; /* the manual is wrong */
|
|
|
|
break;
|
|
|
|
|
|
|
|
case CMD_MULTICMD:
|
|
|
|
if (cmd[3] <= 0x15)
|
|
|
|
{
|
|
|
|
replylen = 8;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
switch (cmd[3])
|
|
|
|
{
|
|
|
|
case SUBCMD_HG_HAM:
|
|
|
|
case SUBCMD_HG_GEN:
|
|
|
|
case SUBCMD_SPLIT:
|
|
|
|
case SUBCMD_CLAR:
|
|
|
|
case SUBCMD_MTOV:
|
|
|
|
replylen = 26;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SUBCMD_VTOM:
|
|
|
|
replylen = 68;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case SUBCMD_SWAP:
|
|
|
|
case SUBCMD_ACLR:
|
|
|
|
replylen = 5;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
/* invalid or unknown sub-command */
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: invalid sub-command 0x%x for command 0x%x\n",
|
|
|
|
__func__, cmd[3], cmd[4]);
|
|
|
|
return -RIG_EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
/* invalid or unknown command */
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: invalid command 0x%x\n",
|
|
|
|
__func__, cmd[4]);
|
|
|
|
return -RIG_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* send the command block */
|
|
|
|
write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
|
|
|
|
|
|
|
|
/* read back the command block echo */
|
|
|
|
retval = read_block(&rig->state.rigport,
|
|
|
|
(char *) cmd_echo_buf,
|
|
|
|
YAESU_CMD_LENGTH);
|
2020-02-23 17:26:09 +00:00
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: read_block failed: %s\n", __func__,
|
|
|
|
rigerror(retval));
|
|
|
|
return retval;
|
2019-12-24 16:07:48 +00:00
|
|
|
}
|
2019-11-30 16:19:08 +00:00
|
|
|
|
|
|
|
/* see if it matches the command we sent */
|
|
|
|
if (memcmp(cmd_echo_buf, cmd, YAESU_CMD_LENGTH))
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: Command echo doesn't match\n",
|
|
|
|
__func__);
|
|
|
|
return -RIG_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* send the ACK */
|
|
|
|
write_block(&rig->state.rigport, (char *) priv->ack_cmd, YAESU_CMD_LENGTH);
|
|
|
|
|
|
|
|
/* read back the response (status bytes) */
|
|
|
|
retval = read_block(&rig->state.rigport,
|
|
|
|
(char *) priv->rx_data,
|
|
|
|
replylen);
|
|
|
|
|
|
|
|
// update data
|
|
|
|
if (retval != replylen)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: Got unexpected number of bytes %d in response\n",
|
|
|
|
__func__, retval);
|
|
|
|
return -RIG_EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* reverse the data buffer returned from the rig */
|
|
|
|
src = &priv->rx_data[0];
|
|
|
|
dst = &priv->update_data[replylen - 1];
|
|
|
|
cpycnt = replylen;
|
|
|
|
|
|
|
|
while (cpycnt--)
|
|
|
|
{
|
|
|
|
*dst-- = *src++;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
2019-11-30 16:19:08 +00:00
|
|
|
|
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* private helper function. Retrieves update data from rig.
|
|
|
|
* using pacing value and buffer indicated in *priv struct.
|
|
|
|
*
|
|
|
|
* need to use this when doing ft767_get_* stuff
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
int ft767_get_update_data(RIG *rig)
|
|
|
|
{
|
2019-11-30 16:19:08 +00:00
|
|
|
/* unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x01, CMD_CHECK}; */
|
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2020-06-23 14:01:46 +00:00
|
|
|
rig_flush(&rig->state.rigport);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* Entering CAT updates our data structures */
|
|
|
|
retval = ft767_enter_CAT(rig);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: enter_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
retval = ft767_leave_CAT(rig);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: leave_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
rig_debug(RIG_DEBUG_TRACE, "%s: status = 0x%02x\n", __func__,
|
|
|
|
priv->update_data[STATUS_FLAGS]);
|
|
|
|
|
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int ft767_set_split(RIG *rig, unsigned int split)
|
|
|
|
{
|
2019-11-30 16:19:08 +00:00
|
|
|
struct ft767_priv_data *priv = (struct ft767_priv_data *)rig->state.priv;
|
|
|
|
int retval;
|
|
|
|
unsigned int curr_split;
|
2011-08-23 02:26:44 +00:00
|
|
|
|
2020-06-23 14:01:46 +00:00
|
|
|
rig_flush(&rig->state.rigport);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* Entering CAT updates our data structures */
|
|
|
|
retval = ft767_enter_CAT(rig);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: enter_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
/* See whether we need to toggle */
|
|
|
|
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2020-03-23 12:52:01 +00:00
|
|
|
rig_debug(RIG_DEBUG_TRACE, "%s called curr_split = %u, split = %u\n", __func__,
|
2019-11-30 16:19:08 +00:00
|
|
|
curr_split, split);
|
|
|
|
|
|
|
|
if (curr_split ^ split)
|
|
|
|
{
|
2019-12-24 16:07:48 +00:00
|
|
|
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, SUBCMD_SPLIT, CMD_MULTICMD};
|
2019-11-30 16:19:08 +00:00
|
|
|
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
|
2007-10-05 04:19:18 +00:00
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: failed to send command: status %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
retval = ft767_leave_CAT(rig);
|
|
|
|
|
|
|
|
if (retval < 0)
|
|
|
|
{
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: leave_CAT %d\n", __func__, retval);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
unsigned char vfo2rig(RIG *rig, vfo_t vfo)
|
|
|
|
{
|
|
|
|
switch (vfo)
|
|
|
|
{
|
|
|
|
case RIG_VFO_CURR:
|
|
|
|
return RIG_OK;
|
|
|
|
|
|
|
|
case RIG_VFO_A:
|
|
|
|
return 0x00;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_B:
|
|
|
|
return 0x01;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case RIG_VFO_MEM:
|
|
|
|
return 0x02;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -RIG_EINVAL; /* sorry, wrong VFO */
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
vfo_t rig2vfo(unsigned char status)
|
|
|
|
{
|
|
|
|
if (status & 0x20)
|
|
|
|
{
|
|
|
|
return RIG_VFO_MEM;
|
|
|
|
}
|
|
|
|
else if (status & 0x10)
|
|
|
|
{
|
|
|
|
return RIG_VFO_B;
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
else
|
2019-11-30 16:19:08 +00:00
|
|
|
{
|
|
|
|
return RIG_VFO_A;
|
|
|
|
}
|
|
|
|
}
|
2007-10-05 04:19:18 +00:00
|
|
|
|
|
|
|
int mode2rig(RIG *rig, rmode_t mode)
|
|
|
|
{
|
2019-11-30 16:19:08 +00:00
|
|
|
int md;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* translate mode from generic to ft767 specific
|
|
|
|
*/
|
|
|
|
switch (mode)
|
|
|
|
{
|
|
|
|
case RIG_MODE_LSB: md = SUBCMD_MODE_LSB; break;
|
|
|
|
|
|
|
|
case RIG_MODE_USB: md = SUBCMD_MODE_USB; break;
|
|
|
|
|
|
|
|
case RIG_MODE_CW: md = SUBCMD_MODE_CW; break;
|
|
|
|
|
|
|
|
case RIG_MODE_AM: md = SUBCMD_MODE_AM; break;
|
|
|
|
|
|
|
|
case RIG_MODE_FM: md = SUBCMD_MODE_FM; break;
|
|
|
|
|
|
|
|
case RIG_MODE_PKTFM: md = SUBCMD_MODE_FSK; break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -RIG_EINVAL; /* sorry, wrong MODE */
|
|
|
|
}
|
|
|
|
|
|
|
|
return md;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int rig2mode(RIG *rig, int md, rmode_t *mode, pbwidth_t *width)
|
2007-10-05 04:19:18 +00:00
|
|
|
{
|
2019-11-30 16:19:08 +00:00
|
|
|
/*
|
|
|
|
* translate mode from ft767 specific to generic
|
|
|
|
*/
|
|
|
|
switch (md & 0x07)
|
|
|
|
{
|
|
|
|
case MODE_LSB: *mode = RIG_MODE_LSB; break;
|
|
|
|
|
|
|
|
case MODE_USB: *mode = RIG_MODE_USB; break;
|
|
|
|
|
|
|
|
case MODE_CW: *mode = RIG_MODE_CW; break;
|
|
|
|
|
|
|
|
case MODE_AM: *mode = RIG_MODE_AM; break;
|
|
|
|
|
|
|
|
case MODE_FM: *mode = RIG_MODE_FM; break;
|
|
|
|
|
|
|
|
case MODE_FSK: *mode = RIG_MODE_PKTFM; break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -RIG_EINVAL; /* sorry, wrong MODE */
|
|
|
|
}
|
|
|
|
|
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|
|
|
|
|
2019-11-30 16:19:08 +00:00
|
|
|
int rig2ctcss(RIG *rig, unsigned char tn, tone_t *tone)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* translate tone from ft767 specific to generic
|
|
|
|
*/
|
|
|
|
switch (tn)
|
|
|
|
{
|
2007-10-05 04:19:18 +00:00
|
|
|
#ifdef USE_YAESU_PUBLISHED_TONES
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2007-10-05 04:19:18 +00:00
|
|
|
/* Yaesu documentation */
|
2019-11-30 16:19:08 +00:00
|
|
|
case 0x3E: *tone = 670; break;
|
|
|
|
|
|
|
|
case 0x1D: *tone = 670; break; /* High Q */
|
|
|
|
|
|
|
|
case 0x3D: *tone = 719; break;
|
|
|
|
|
|
|
|
case 0x1C: *tone = 719; break; /* High Q */
|
|
|
|
|
|
|
|
case 0x1B: *tone = 747; break; /* High Q */
|
|
|
|
|
|
|
|
case 0x3C: *tone = 770; break;
|
|
|
|
|
|
|
|
case 0x1A: *tone = 770; break; /* High Q */
|
|
|
|
|
|
|
|
case 0x19: *tone = 797; break; /* High Q */
|
|
|
|
|
|
|
|
case 0x3B: *tone = 825; break;
|
|
|
|
|
|
|
|
case 0x18: *tone = 825; break; /* High Q */
|
|
|
|
|
|
|
|
case 0x17: *tone = 854; break; /* High Q */
|
|
|
|
|
|
|
|
case 0x3A: *tone = 885; break;
|
|
|
|
|
|
|
|
case 0x16: *tone = 885; break; /* High Q */
|
|
|
|
|
|
|
|
case 0x15: *tone = 915; break; /* High Q */
|
|
|
|
|
|
|
|
case 0x39: *tone = 948; break;
|
|
|
|
|
|
|
|
case 0x38: *tone = 1000; break;
|
|
|
|
|
|
|
|
case 0x37: *tone = 1035; break;
|
|
|
|
|
|
|
|
case 0x36: *tone = 1072; break;
|
|
|
|
|
|
|
|
case 0x35: *tone = 1109; break;
|
|
|
|
|
|
|
|
case 0x34: *tone = 1148; break;
|
|
|
|
|
|
|
|
case 0x33: *tone = 1188; break;
|
|
|
|
|
|
|
|
case 0x32: *tone = 1230; break;
|
|
|
|
|
|
|
|
case 0x31: *tone = 1273; break;
|
|
|
|
|
|
|
|
case 0x30: *tone = 1318; break;
|
|
|
|
|
|
|
|
case 0x2F: *tone = 1365; break;
|
|
|
|
|
|
|
|
case 0x2E: *tone = 1413; break;
|
|
|
|
|
|
|
|
case 0x2D: *tone = 1462; break;
|
|
|
|
|
|
|
|
case 0x2C: *tone = 1514; break;
|
|
|
|
|
|
|
|
case 0x2B: *tone = 1567; break;
|
|
|
|
|
|
|
|
case 0x2A: *tone = 1622; break;
|
|
|
|
|
|
|
|
case 0x29: *tone = 1679; break;
|
|
|
|
|
|
|
|
case 0x28: *tone = 1738; break;
|
|
|
|
|
|
|
|
case 0x27: *tone = 1799; break;
|
|
|
|
|
|
|
|
case 0x26: *tone = 1862; break;
|
|
|
|
|
|
|
|
case 0x25: *tone = 1928; break;
|
|
|
|
|
|
|
|
case 0x24: *tone = 2035; break;
|
|
|
|
|
|
|
|
case 0x23: *tone = 2107; break;
|
|
|
|
|
|
|
|
case 0x22: *tone = 2181; break;
|
|
|
|
|
|
|
|
case 0x21: *tone = 2257; break;
|
|
|
|
|
|
|
|
case 0x20: *tone = 2336; break;
|
|
|
|
|
|
|
|
case 0x1F: *tone = 2418; break;
|
|
|
|
|
|
|
|
case 0x1E: *tone = 2503; break;
|
2007-10-05 04:19:18 +00:00
|
|
|
#else
|
2019-11-30 16:19:08 +00:00
|
|
|
|
2007-10-05 04:19:18 +00:00
|
|
|
/* values found by experimentation */
|
2019-11-30 16:19:08 +00:00
|
|
|
case 0: *tone = 670; break;
|
|
|
|
|
|
|
|
case 33: *tone = 670; break; /* High Q */
|
|
|
|
|
|
|
|
case 01: *tone = 719; break;
|
|
|
|
|
|
|
|
case 34: *tone = 719; break; /* High Q */
|
|
|
|
|
|
|
|
case 35: *tone = 747; break; /* High Q */
|
|
|
|
|
|
|
|
case 2: *tone = 770; break;
|
|
|
|
|
|
|
|
case 36: *tone = 770; break; /* High Q */
|
|
|
|
|
|
|
|
case 37: *tone = 797; break; /* High Q */
|
|
|
|
|
|
|
|
case 3: *tone = 825; break;
|
|
|
|
|
|
|
|
case 38: *tone = 825; break; /* High Q */
|
|
|
|
|
|
|
|
case 39: *tone = 854; break; /* High Q */
|
|
|
|
|
|
|
|
case 4: *tone = 885; break;
|
|
|
|
|
|
|
|
case 40: *tone = 885; break; /* High Q */
|
|
|
|
|
|
|
|
case 41: *tone = 915; break; /* High Q */
|
|
|
|
|
|
|
|
case 5: *tone = 948; break;
|
|
|
|
|
|
|
|
case 6: *tone = 1000; break;
|
|
|
|
|
|
|
|
case 7: *tone = 1035; break;
|
|
|
|
|
|
|
|
case 8: *tone = 1072; break;
|
|
|
|
|
|
|
|
case 9: *tone = 1109; break;
|
|
|
|
|
|
|
|
case 10: *tone = 1148; break;
|
|
|
|
|
|
|
|
case 11: *tone = 1188; break;
|
|
|
|
|
|
|
|
case 12: *tone = 1230; break;
|
|
|
|
|
|
|
|
case 13: *tone = 1273; break;
|
|
|
|
|
|
|
|
case 14: *tone = 1318; break;
|
|
|
|
|
|
|
|
case 15: *tone = 1365; break;
|
|
|
|
|
|
|
|
case 16: *tone = 1413; break;
|
|
|
|
|
|
|
|
case 17: *tone = 1462; break;
|
|
|
|
|
|
|
|
case 18: *tone = 1514; break;
|
|
|
|
|
|
|
|
case 19: *tone = 1567; break;
|
|
|
|
|
|
|
|
case 20: *tone = 1622; break;
|
|
|
|
|
|
|
|
case 21: *tone = 1679; break;
|
|
|
|
|
|
|
|
case 22: *tone = 1738; break;
|
|
|
|
|
|
|
|
case 23: *tone = 1799; break;
|
|
|
|
|
|
|
|
case 24: *tone = 1862; break;
|
|
|
|
|
|
|
|
case 25: *tone = 1928; break;
|
|
|
|
|
|
|
|
case 26: *tone = 2035; break;
|
|
|
|
|
|
|
|
case 27: *tone = 2107; break;
|
|
|
|
|
|
|
|
case 28: *tone = 2181; break;
|
|
|
|
|
|
|
|
case 29: *tone = 2257; break;
|
|
|
|
|
|
|
|
case 30: *tone = 2336; break;
|
|
|
|
|
|
|
|
case 31: *tone = 2418; break;
|
|
|
|
|
|
|
|
case 32: *tone = 2503; break;
|
2007-10-05 04:19:18 +00:00
|
|
|
#endif
|
2019-11-30 16:19:08 +00:00
|
|
|
|
|
|
|
default:
|
|
|
|
rig_debug(RIG_DEBUG_ERR, "%s: Invalid tone value from rig: 0x%02x\n",
|
|
|
|
__func__, tn);
|
|
|
|
return -RIG_EINVAL; /* sorry, wrong TONE */
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return RIG_OK;
|
2007-10-05 04:19:18 +00:00
|
|
|
}
|