Hamlib/rigs/icom/os535.c

179 wiersze
5.2 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib CI-V backend - description of the OptoScan535
* Copyright (c) 2000-2004 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
/*
* This backend is currently being maintained by Michael Smith, KE4RJQ.
* Email: james (dot) m (dot) smith (at) earthlink (dot) net
*/
#include <stdlib.h>
#include <hamlib/rig.h>
#include "idx_builtin.h"
#include "icom.h"
#include "tones.h"
#include "optoscan.h"
extern struct confparams opto_ext_parms[];
#define OS535_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)
#define OS535_VFO_ALL (RIG_VFO_A)
#define OS535_LEVELS (RIG_LEVEL_RAWSTR|RIG_LEVEL_AF)
#define OS535_SCAN_OPS (RIG_SCAN_PLT)
#define OS535_STR_CAL { 2, { \
{ 20, 60 }, \
{ 137, -60 }, \
} } /* TBC */
/*
* The OptoScan is not actually a rig. This is an add-in circuit board
* for the Realistic PRO-2035 and PRO-2045 Scanning VHF-UHF Receivers.
* http://www.optoelectronics.com/tech/pdf/os535/os535_ci5_spec_v10.pdf
*
* TODO: srch_dcs, srch_ctcss, rcv_dtmf, and make icom_probe opto aware
*/
static struct icom_priv_caps os535_priv_caps =
{
0x80, /* default address */
0, /* 731 mode */
0, /* no XCHG */
NULL,
.settle_time = 12,
};
const struct rig_caps os535_caps =
{
RIG_MODEL(RIG_MODEL_OS535),
.model_name = "OptoScan535",
.mfg_name = "Optoelectronics",
.version = BACKEND_VER ".0",
.copyright = "LGPL",
2021-09-15 18:50:31 +00:00
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_SCANNER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_SERIAL_CAR,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = OS535_LEVELS,
.has_set_level = RIG_LEVEL_AF,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = full_ctcss_list,
.dcs_list = full_dcs_list,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = RIG_OP_NONE,
.scan_ops = OS535_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = { RIG_CHAN_END, },
.rx_range_list1 = {
{ MHz(25), MHz(520), OS535_MODES, -1, -1, OS535_VFO_ALL},
{ MHz(760), MHz(1300), OS535_MODES, -1, -1, OS535_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list1 = { RIG_FRNG_END, }, /* this is a scanner */
.rx_range_list2 = {
{ MHz(25), MHz(520), OS535_MODES, -1, -1, OS535_VFO_ALL},
{ MHz(760), MHz(823.995), OS535_MODES, -1, -1, OS535_VFO_ALL},
{ MHz(849), MHz(868.995), OS535_MODES, -1, -1, OS535_VFO_ALL},
{ MHz(894), MHz(1300), OS535_MODES, -1, -1, OS535_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list2 = { RIG_FRNG_END, }, /* this is a scanner */
.tuning_steps = {
{OS535_MODES, kHz(5)},
{OS535_MODES, kHz(12.5)},
{OS535_MODES, kHz(50)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_AM | RIG_MODE_FM | RIG_MODE_WFM, kHz(15)}, /* TBC */
RIG_FLT_END,
},
.str_cal = OS535_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void *)& os535_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = optoscan_open,
.rig_close = optoscan_close,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.get_dcd = icom_get_dcd,
.decode_event = icom_decode_event,
.get_info = optoscan_get_info,
.get_ctcss_tone = optoscan_get_ctcss_tone,
.get_dcs_code = optoscan_get_dcs_code,
.recv_dtmf = optoscan_recv_dtmf,
.extparms = opto_ext_parms,
.set_ext_parm = optoscan_set_ext_parm,
.get_ext_parm = optoscan_get_ext_parm,
.set_level = optoscan_set_level,
.get_level = optoscan_get_level,
.scan = optoscan_scan,
2022-02-11 19:16:26 +00:00
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
};