Hamlib/tests/testrig.c

227 wiersze
5.5 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib sample program
*/
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <stdlib.h>
#include <hamlib/rig.h>
#define SERIAL_PORT "/dev/ttyS0"
int main (int argc, char *argv[])
{
RIG *my_rig; /* handle to rig (nstance) */
freq_t freq; /* frequency */
rmode_t rmode; /* radio mode of operation */
pbwidth_t width;
vfo_t vfo; /* vfo selection */
int strength; /* S-Meter level */
int retcode; /* generic return code from functions */
rig_model_t myrig_model;
printf("testrig:hello, I am your main() !\n");
/*
* allocate memory, setup & open port
*/
if (argc < 2) {
hamlib_port_t myport;
/* may be overriden by backend probe */
myport.type.rig = RIG_PORT_SERIAL;
myport.parm.serial.rate = 9600;
myport.parm.serial.data_bits = 8;
myport.parm.serial.stop_bits = 1;
myport.parm.serial.parity = RIG_PARITY_NONE;
myport.parm.serial.handshake = RIG_HANDSHAKE_NONE;
strncpy(myport.pathname, SERIAL_PORT, FILPATHLEN);
rig_load_all_backends();
myrig_model = rig_probe(&myport);
} else {
myrig_model = atoi(argv[1]);
}
my_rig = rig_init(myrig_model);
if (!my_rig) {
fprintf(stderr,"Unknown rig num: %d\n", myrig_model);
fprintf(stderr,"Please check riglist.h\n");
exit(1); /* whoops! something went wrong (mem alloc?) */
}
strncpy(my_rig->state.rigport.pathname,SERIAL_PORT,FILPATHLEN);
retcode = rig_open(my_rig);
if (retcode != RIG_OK) {
printf("rig_open: error = %s\n", rigerror(retcode));
exit(2);
}
printf("Port %s opened ok\n", SERIAL_PORT);
/*
* Below are examples of set/get routines.
* Must add checking of functionality map prior to command execution -- FS
*
*/
/*
* Example of setting rig paameters
* and some error checking on the return code.
*/
retcode = rig_set_vfo(my_rig, RIG_VFO_B);
if (retcode != RIG_OK ) {
printf("rig_set_vfo: error = %s \n", rigerror(retcode));
}
/*
* Lets try some frequencies and modes. Return code is not checked.
* Examples of checking return code are further down.
*
*/
/* 10m FM Narrow */
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 28350125); /* 10m */
retcode = rig_set_mode(my_rig, RIG_VFO_CURR, RIG_MODE_FM,
rig_passband_narrow(my_rig, RIG_MODE_FM));
sleep(3); /* so you can see it -- FS */
/* 15m USB */
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 21235175); /* 15m */
retcode = rig_set_mode(my_rig, RIG_VFO_CURR, RIG_MODE_USB, RIG_PASSBAND_NORMAL);
sleep(3);
/* AM Broadcast band */
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 770000); /* KAAM */
retcode = rig_set_mode(my_rig, RIG_VFO_CURR, RIG_MODE_AM, RIG_PASSBAND_NORMAL);
sleep(3);
/* 40m LSB */
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 7250100); /* 40m */
retcode = rig_set_mode(my_rig, RIG_VFO_CURR, RIG_MODE_LSB, RIG_PASSBAND_NORMAL);
sleep(3);
/* 80m AM NArrow */
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 3980000); /* 80m */
retcode = rig_set_mode(my_rig, RIG_VFO_CURR, RIG_MODE_AM,
rig_passband_narrow(my_rig, RIG_MODE_FM));
sleep(3);
/* 160m CW Normal */
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 1875000); /* 160m */
retcode = rig_set_mode(my_rig, RIG_VFO_CURR, RIG_MODE_CW, RIG_PASSBAND_NORMAL);
sleep(3);
/* 160m CW Narrow -- The band is noisy tonight -- FS*/
retcode = rig_set_mode(my_rig, RIG_VFO_CURR, RIG_MODE_CW,
rig_passband_narrow(my_rig, RIG_MODE_FM));
sleep(3);
/* 20m USB on VFO_A */
retcode = rig_set_vfo(my_rig, RIG_VFO_A);
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 14250375); /* cq de vk3fcs */
sleep(3);
/* 20m USB on VFO_A , with only 1 call */
retcode = rig_set_freq(my_rig, RIG_VFO_A, 14295125); /* cq de vk3fcs */
sleep(3);
#if 0
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 145100000); /* 2m */
sleep(2);
retcode = rig_set_freq(my_rig, RIG_VFO_CURR, 435125000); /* 70cm */
sleep(2);
#endif
if (retcode != RIG_OK ) {
printf("rig_set_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_set_mode(my_rig, RIG_VFO_CURR, RIG_MODE_LSB, RIG_PASSBAND_NORMAL);
if (retcode != RIG_OK ) {
printf("rig_set_mode: error = %s \n", rigerror(retcode));
}
retcode = rig_set_ptt(my_rig, RIG_VFO_A, RIG_PTT_ON ); /* stand back ! */
if (retcode != RIG_OK ) {
printf("rig_set_ptt: error = %s \n", rigerror(retcode));
}
sleep(1);
retcode = rig_set_ptt(my_rig, RIG_VFO_A, RIG_PTT_OFF ); /* phew ! */
if (retcode != RIG_OK ) {
printf("rig_set_ptt: error = %s \n", rigerror(retcode));
}
sleep(1);
/*
* Simple examples of getting rig information -- FS
*
*/
retcode = rig_get_vfo(my_rig, &vfo); /* try to get vfo info */
if (retcode == RIG_OK ) {
printf("rig_get_vfo: vfo = %i \n", vfo);
} else {
printf("rig_get_vfo: error = %s \n", rigerror(retcode));
}
retcode = rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
if (retcode == RIG_OK ) {
printf("rig_get_freq: freq = %"PRIfreq"\n", freq);
} else {
printf("rig_get_freq: error = %s \n", rigerror(retcode));
}
retcode = rig_get_mode(my_rig, RIG_VFO_CURR, &rmode, &width);
if (retcode == RIG_OK ) {
printf("rig_get_mode: mode = %i \n", rmode);
} else {
printf("rig_get_mode: error = %s \n", rigerror(retcode));
}
retcode = rig_get_strength(my_rig, RIG_VFO_CURR, &strength);
if (retcode == RIG_OK ) {
printf("rig_get_strength: strength = %i \n", strength);
} else {
printf("rig_get_strength: error = %s \n", rigerror(retcode));
}
rig_close(my_rig); /* close port */
rig_cleanup(my_rig); /* if you care about memory */
printf("port %s closed ok \n",SERIAL_PORT);
return 0;
}