kopia lustrzana https://github.com/Hamlib/Hamlib
491 wiersze
12 KiB
C
491 wiersze
12 KiB
C
![]() |
|
||
|
#include <unistd.h>
|
||
|
#include <sys/types.h>
|
||
|
#include <sys/mman.h>
|
||
|
#include <stdio.h>
|
||
|
#include <stdlib.h>
|
||
|
#include <fcntl.h>
|
||
|
#include <assert.h>
|
||
|
|
||
|
#include "peekpoke.h"
|
||
|
#include "ep93xx_adc.h"
|
||
|
|
||
|
#define DATA_PAGE 0x12C00000
|
||
|
#define CALIB_LOC 2027 //location of calibration values
|
||
|
#define NUM_SAMPLES 5
|
||
|
#define NUM_CHANNELS 4
|
||
|
|
||
|
/* globals */
|
||
|
static unsigned long adc_page, syscon_page;
|
||
|
char *dr_page;
|
||
![]() |
double el, az;
|
||
![]() |
|
||
|
/*Calculate the adc value corresponding to 0V*/
|
||
|
//val1 is the ADC val coresponding to 0.833V
|
||
|
//val2 is the ADC val corresponging to 2.5V
|
||
|
int calcZeroVal(int val1, int val2)
|
||
|
{
|
||
![]() |
val2 += 0x10000;
|
||
|
return (int)(val1 - (((val2 - val1) / (2.5 - 0.833)) * 0.833));
|
||
![]() |
}
|
||
|
|
||
|
|
||
|
//return value of 1 indicates the board has no calibration values
|
||
|
//return value of 0 indicates the board has calibration values
|
||
|
int read_calibration(int buf[NUM_CHANNELS][2])
|
||
|
{
|
||
![]() |
int i, j, k = 0;
|
||
|
unsigned short cal[NUM_CHANNELS * 2];
|
||
|
// read 16 calibration bytes into buffer
|
||
|
FILE *f = fopen("/etc/ADC-calibration.dat", "r");
|
||
|
|
||
|
if (!f) { goto empty_calibration; }
|
||
|
|
||
|
printf("Non-virgin board detected, evaluating stored "
|
||
|
"calibration values\n");
|
||
|
printf("Stored Calibration values [");
|
||
|
|
||
|
if (fread(cal, NUM_CHANNELS * 4, 1, f) == 1)
|
||
|
{
|
||
![]() |
fclose(f);
|
||
![]() |
for (j = 0; j < 2; j++)
|
||
|
for (i = 0; i < NUM_CHANNELS; i++)
|
||
|
{
|
||
|
printf("0x%x", cal[k]);
|
||
|
buf[i][j] = cal[k];
|
||
|
k++;
|
||
|
|
||
|
if (k < NUM_CHANNELS * 2)
|
||
|
{
|
||
|
printf(", ");
|
||
|
}
|
||
|
|
||
|
}
|
||
|
|
||
|
printf("]\n");
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
empty_calibration:
|
||
|
|
||
![]() |
fclose(f);
|
||
|
|
||
![]() |
printf("/etc/ADC-calibration.dat not found or it's not readable\n");
|
||
|
|
||
|
return 0;
|
||
![]() |
}
|
||
|
|
||
|
void write_calibration(int cal[NUM_CHANNELS][2])
|
||
|
{
|
||
![]() |
unsigned short buf[16];
|
||
|
int i, j, k = 0;
|
||
|
FILE *f = fopen("/etc/ADC-calibration.dat", "w");
|
||
|
|
||
|
//Convert 32 bit vals to 16 bit vals
|
||
|
for (j = 0; j < 2; j++)
|
||
|
for (i = 0; i < NUM_CHANNELS; i++)
|
||
|
{
|
||
|
buf[k] = (unsigned short)cal[i][j];
|
||
|
k++;
|
||
![]() |
|
||
![]() |
}
|
||
![]() |
|
||
![]() |
if (!f) { goto unwrite_calibration; }
|
||
![]() |
|
||
![]() |
if (fwrite(buf, NUM_CHANNELS * 4, 1, f) == 1) { return; }
|
||
![]() |
|
||
![]() |
unwrite_calibration:
|
||
![]() |
|
||
![]() |
printf("Problem writing /etc/ADC-calibration.dat: %m\n");
|
||
![]() |
}
|
||
|
|
||
|
static void erase_calibration()
|
||
|
{
|
||
![]() |
printf("Erasing calibration values...\n");
|
||
|
unlink("/etc/ADC-calibration.dat");
|
||
![]() |
}
|
||
|
|
||
|
int check_calibration(int cal[NUM_CHANNELS][2],
|
||
![]() |
int stored_cal[NUM_CHANNELS][2], int state)
|
||
![]() |
{
|
||
![]() |
double pcnt_diff;
|
||
|
int i, j, erase_cal = 0;
|
||
|
int failure = 0;
|
||
|
|
||
|
if (state == 0) //no calibration values
|
||
|
{
|
||
|
printf("Virgin board detected...\n");
|
||
|
|
||
|
for (j = 0; j < 2; j++)
|
||
|
{
|
||
|
|
||
|
for (i = 0; i < NUM_CHANNELS; i++)
|
||
|
{
|
||
|
|
||
|
if (j == 0)
|
||
|
pcnt_diff = (((double)abs(0xa000 -
|
||
|
cal[i][j])) / 0xa000) * 100;
|
||
|
else
|
||
|
pcnt_diff = (((double)abs(0x3300 -
|
||
|
cal[i][j])) / 0x3300) * 100;
|
||
|
|
||
|
if (pcnt_diff > 10)
|
||
|
{
|
||
|
printf("Calculated calibration "
|
||
|
"values out of range...\n");
|
||
|
|
||
|
exit(-1);
|
||
|
}
|
||
|
|
||
|
}
|
||
|
}
|
||
|
|
||
|
write_calibration(cal);
|
||
|
|
||
|
}
|
||
|
else //calibration values read
|
||
|
{
|
||
|
|
||
|
for (j = 0; j < 2; j++)
|
||
|
{
|
||
|
for (i = 0; i < NUM_CHANNELS; i++)
|
||
|
{
|
||
|
|
||
|
pcnt_diff = (((double)abs(stored_cal[i][j] -
|
||
|
cal[i][j])) / stored_cal[i][j])
|
||
|
* 100;
|
||
|
|
||
|
if (pcnt_diff > 0.25)
|
||
|
{
|
||
|
if (!failure)
|
||
|
{
|
||
|
printf("Calibration values out"
|
||
|
"of range\n");
|
||
|
failure = 1;
|
||
|
erase_cal = 1;
|
||
|
}
|
||
|
|
||
|
printf("\tChannel %d: %3.3f%%\n", i
|
||
|
, pcnt_diff);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (erase_cal) { erase_calibration(); }
|
||
|
|
||
|
if (failure) { return 0; }
|
||
|
|
||
|
return 1;
|
||
![]() |
}
|
||
|
|
||
![]() |
void setDR(char *x, int n, int val)
|
||
![]() |
{
|
||
![]() |
if (n < 0 || n > 8)
|
||
|
{
|
||
|
return;
|
||
|
}
|
||
![]() |
|
||
![]() |
x[0] = (x[0] & ~(1 << n)) | (val ? (1 << n) : 0);
|
||
![]() |
}
|
||
|
|
||
![]() |
void setD(char *x, int n, int val)
|
||
![]() |
{
|
||
![]() |
if (n < 0 || n > 8)
|
||
|
{
|
||
|
return;
|
||
|
}
|
||
![]() |
|
||
![]() |
x[2] = (x[2] & ~(1 << n)) | (val ? (1 << n) : 0);
|
||
![]() |
}
|
||
|
|
||
|
double get_volts(int val, int zero, int range)
|
||
|
{
|
||
![]() |
if (val <= 0x7000)
|
||
|
{
|
||
|
val = val + 0x10000;
|
||
|
}
|
||
![]() |
|
||
![]() |
val = val - zero;
|
||
![]() |
|
||
![]() |
return ((double)val * 3.3) / range;
|
||
![]() |
}
|
||
|
|
||
|
void calc_calibration(int calibration[NUM_CHANNELS][2],
|
||
![]() |
int adc_result_1[NUM_CHANNELS][NUM_SAMPLES],
|
||
|
int adc_result_2[NUM_CHANNELS][NUM_SAMPLES])
|
||
![]() |
{
|
||
![]() |
int i, j;
|
||
|
|
||
|
/* zero out our calibration values */
|
||
|
for (i = 0; i < NUM_CHANNELS; i++)
|
||
|
for (j = 0; j < 2; j++)
|
||
|
{
|
||
|
calibration[i][j] = 0;
|
||
|
}
|
||
|
|
||
|
//convert 0.833V vals to 0V vals
|
||
|
for (i = 0; i < NUM_CHANNELS; i++)
|
||
|
{
|
||
|
for (j = 0; j < NUM_SAMPLES; j++)
|
||
|
{
|
||
|
if (i % 2) //odd channels
|
||
|
adc_result_1[i][j] =
|
||
|
calcZeroVal(adc_result_1[i][j],
|
||
|
adc_result_1[0][j]);
|
||
|
else
|
||
|
adc_result_2[i][j] =
|
||
|
calcZeroVal(adc_result_2[i][j],
|
||
|
adc_result_2[1][j]);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
//sum the readings
|
||
|
for (i = 0; i < NUM_CHANNELS; i++)
|
||
|
{
|
||
|
for (j = 0; j < NUM_SAMPLES; j++)
|
||
|
{
|
||
|
if (i % 2 == 0)
|
||
|
{
|
||
|
//0.833 volt values
|
||
|
calibration[i][0] = adc_result_2[i][j]
|
||
|
+ calibration[i][0];
|
||
|
//2.5 volt values
|
||
|
calibration[i][1] = adc_result_1[i][j]
|
||
|
+ calibration[i][1];
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
//0.833 volt values
|
||
|
calibration[i][0] = adc_result_1[i][j]
|
||
|
+ calibration[i][0];
|
||
|
//2.5 volt values
|
||
|
calibration[i][1] = adc_result_2[i][j]
|
||
|
+ calibration[i][1];
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
//printf("Calculated Calibration values [");
|
||
|
for (j = 0; j < 2; j++)
|
||
|
{
|
||
|
for (i = 0; i < NUM_CHANNELS; i++)
|
||
|
{
|
||
|
calibration[i][j] = (calibration[i][j] / NUM_SAMPLES);
|
||
|
|
||
|
//printf("0x%x", calibration[i][j]);
|
||
|
|
||
|
//if((i == NUM_CHANNELS-1) && (j == 1))
|
||
|
//printf("]\n");
|
||
|
//else
|
||
|
//printf(", ");
|
||
|
}
|
||
|
}
|
||
![]() |
}
|
||
|
|
||
|
/************************************************************************
|
||
|
*DESCRIPTION: Read the EP93xx onboard ADC. Discard the first
|
||
|
*two samples then save the next NUM_SAMPLES.
|
||
|
***********************************************************************/
|
||
|
static void read_7xxx_adc(int adc_result[NUM_CHANNELS][NUM_SAMPLES])
|
||
|
{
|
||
![]() |
int i, j, cur_ch;
|
||
|
|
||
|
for (i = 0; i < NUM_CHANNELS; i++)
|
||
|
{
|
||
|
switch (i)
|
||
|
{
|
||
|
case 0:
|
||
|
cur_ch = ADC_CH0;
|
||
|
break;
|
||
|
|
||
|
case 1:
|
||
|
cur_ch = ADC_CH1;
|
||
|
break;
|
||
|
|
||
|
case 2:
|
||
|
cur_ch = ADC_CH2;
|
||
|
break;
|
||
|
|
||
|
case 3:
|
||
|
cur_ch = ADC_CH3;
|
||
|
break;
|
||
|
|
||
|
case 4:
|
||
|
cur_ch = ADC_CH4;
|
||
|
break;
|
||
|
|
||
|
}
|
||
|
|
||
|
//discard first two samples
|
||
|
read_channel(adc_page, cur_ch);
|
||
|
read_channel(adc_page, cur_ch);
|
||
|
|
||
|
//read more samples
|
||
|
for (j = 0; j < NUM_SAMPLES; j++)
|
||
|
{
|
||
![]() |
hl_usleep(10000);
|
||
![]() |
adc_result[i][j] = read_channel(adc_page, cur_ch);
|
||
|
}
|
||
|
}
|
||
![]() |
}
|
||
|
|
||
|
int test_ADC(int calibration[NUM_CHANNELS][2])
|
||
|
{
|
||
![]() |
int adc_result_1[NUM_CHANNELS][NUM_SAMPLES];
|
||
|
int adc_result_2[NUM_CHANNELS][NUM_SAMPLES];
|
||
|
int i, j, return_val;
|
||
|
int failure = 0;
|
||
|
//double voltage,el,az;
|
||
![]() |
double voltage;
|
||
|
|
||
![]() |
setD(dr_page, 0, 1); //ADC1 = ADC3 = 0.833V
|
||
|
setD(dr_page, 2, 1); //ADC0 = ADC2 = 2.5V
|
||
|
read_7xxx_adc(adc_result_1);
|
||
|
|
||
|
setD(dr_page, 0, 0); //ADC1 = ADC3 = 2.5V
|
||
|
setD(dr_page, 2, 1); //ADC0 = ADC2 = 0.833V
|
||
|
read_7xxx_adc(adc_result_2);
|
||
|
|
||
|
|
||
|
el = get_volts(adc_result_1[0][0], 0x9E58, 0xC350);
|
||
|
az = get_volts(adc_result_1[1][0], 0x9E58, 0xC350);
|
||
|
|
||
|
el = (el / 3.3) * 180;
|
||
|
az = (az / 3.3) * 360;
|
||
|
//printf("\t El.: %3.1f Az.: %3.1f \n", el, az);
|
||
|
|
||
|
//verify results are within range
|
||
|
for (i = 0; i < NUM_CHANNELS; i++)
|
||
|
{
|
||
|
for (j = 0; j < NUM_SAMPLES; j++)
|
||
|
{
|
||
|
//use the datasheet values
|
||
|
voltage = get_volts(adc_result_1[i][j], 0x9E58, 0xC350);
|
||
|
|
||
|
//printf("\tChannel %d: %3.1f \n", i, voltage);
|
||
|
//even channels 2.5V(+-150mV)
|
||
|
if (i % 2 == 0 &&
|
||
|
(voltage < 2.35 || voltage > 2.65))
|
||
|
{
|
||
|
if (!failure)
|
||
|
{
|
||
|
failure = 1;
|
||
|
//printf("EP93XX ADC out of range\n");
|
||
|
}
|
||
|
|
||
|
//printf("\tChannel %d: %3.3fV"
|
||
|
//"(expected 2.5V +- 150mV)\n", i, voltage);
|
||
|
//odd channels 0.833(+-50mV)
|
||
|
}
|
||
|
else if (i % 2 == 1 &&
|
||
|
(voltage < 0.333 || voltage > 1.333))
|
||
|
{
|
||
|
if (!failure)
|
||
|
{
|
||
|
failure = 1;
|
||
|
//printf( "EP93xx ADC out of range\n");
|
||
|
}
|
||
|
|
||
|
//printf("\tChannel %d: %3.3fV"
|
||
|
// "(expected 0.833V +- 50mV)\n", i, voltage);
|
||
|
}
|
||
|
|
||
|
|
||
|
//use the datasheet values
|
||
|
voltage = get_volts(adc_result_2[i][j], 0x9E58, 0xC350);
|
||
|
|
||
|
//odd channels 2.5V(+-150mV)
|
||
|
if (i % 2 == 1 &&
|
||
|
(voltage < 2.35 || voltage > 2.65))
|
||
|
{
|
||
|
if (!failure)
|
||
|
{
|
||
|
failure = 1;
|
||
|
//printf("EP93XX ADC out of range\n");
|
||
|
}
|
||
|
|
||
|
//printf("\tChannel %d: %3.3fV"
|
||
|
//"(expected 2.5V +- 150mV)\n", i, voltage);
|
||
|
//even channels 0.833(+-50mV)
|
||
|
}
|
||
|
else if (i % 2 == 0 &&
|
||
|
(voltage < 0.333 || voltage > 1.333))
|
||
|
{
|
||
|
if (!failure)
|
||
|
{
|
||
|
failure = 1;
|
||
|
//printf( "EP93xx ADC out of range\n");
|
||
|
}
|
||
|
|
||
|
///printf("\tChannel %d: %3.3fV" "(expected 0.833V +- 50mV)\n", i, voltage);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
|
||
|
calc_calibration(calibration, adc_result_1, adc_result_2);
|
||
|
|
||
|
if (failure)
|
||
|
{
|
||
|
return_val = 0;
|
||
|
}
|
||
|
else { return_val = 1; }
|
||
|
|
||
|
return return_val;
|
||
![]() |
}
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
int main(void)
|
||
|
{
|
||
![]() |
int calibration[NUM_CHANNELS][2];
|
||
![]() |
int ret_val;
|
||
![]() |
int devmem = open("/dev/mem", O_RDWR | O_SYNC);
|
||
|
assert(devmem != -1);
|
||
|
|
||
|
dr_page = mmap(0, getpagesize(), PROT_READ | PROT_WRITE,
|
||
|
MAP_SHARED, devmem, DATA_PAGE);
|
||
|
assert(&dr_page != MAP_FAILED);
|
||
|
adc_page = (unsigned long)mmap(0, getpagesize(), PROT_READ | PROT_WRITE,
|
||
|
MAP_SHARED, devmem, ADC_PAGE);
|
||
|
assert(&adc_page != MAP_FAILED);
|
||
|
syscon_page = (unsigned long)mmap(0, getpagesize(), PROT_READ | PROT_WRITE
|
||
|
, MAP_SHARED, devmem, SYSCON_PAGE);
|
||
|
assert(&syscon_page != MAP_FAILED);
|
||
|
|
||
|
init_ADC(adc_page, syscon_page);
|
||
|
setDR(dr_page, 0, 1);
|
||
|
setDR(dr_page, 1, 0);
|
||
|
setDR(dr_page, 2, 1);
|
||
|
setDR(dr_page, 3, 0);
|
||
|
|
||
|
|
||
|
if (test_ADC(calibration))
|
||
|
{
|
||
![]() |
int state;
|
||
|
int stored_calibration[NUM_CHANNELS][2];
|
||
![]() |
printf("ADC tested ok(data sheet values)\n");
|
||
|
state = read_calibration(stored_calibration);
|
||
|
|
||
|
if (check_calibration(calibration, stored_calibration, state))
|
||
|
{
|
||
|
ret_val = 0;
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
ret_val = 1;
|
||
|
}
|
||
|
|
||
|
}
|
||
|
else
|
||
|
{
|
||
|
ret_val = 1;
|
||
|
}
|
||
|
|
||
|
printf("\t El.: %3.1f Az.: %3.1f \n", el, az);
|
||
|
close(devmem);
|
||
|
return ret_val;
|
||
![]() |
}
|