Hamlib/rigs/kenwood/ts940.c

201 wiersze
5.8 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib Kenwood backend - TS940 description
* Copyright (c) 2000-2004 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "bandplan.h"
#include "kenwood.h"
#define TS940_ALL_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_CW|RIG_MODE_SSB)
#define TS940_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY)
#define TS940_AM_TX_MODES RIG_MODE_AM
#define TS940_FUNC_ALL RIG_FUNC_LOCK
#define TS940_LEVEL_ALL RIG_LEVEL_NONE
#define TS940_VFO (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define TS940_ANTS (0)
#define TS940_VFO_OPS (RIG_OP_UP|RIG_OP_DOWN)
#define TS940_SCAN_OPS (RIG_SCAN_VFO)
/* memory capabilities */
2019-11-30 16:19:08 +00:00
#define TS940_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.tx_freq=1, \
.tx_mode=1, \
}
2019-11-30 16:19:08 +00:00
static rmode_t ts940_mode_table[KENWOOD_MODE_TABLE_MAX] =
{
[0] = RIG_MODE_NONE,
[1] = RIG_MODE_LSB,
[2] = RIG_MODE_USB,
[3] = RIG_MODE_CW,
[4] = RIG_MODE_FM,
[5] = RIG_MODE_AM,
[6] = RIG_MODE_NONE,
[7] = RIG_MODE_NONE,
[8] = RIG_MODE_NONE,
[9] = RIG_MODE_NONE
};
2019-11-30 16:19:08 +00:00
static struct kenwood_priv_caps ts940_priv_caps =
{
.cmdtrm = EOM_KEN,
.mode_table = ts940_mode_table
};
/*
* ts940 rig capabilities.
* written from specs:
2019-11-30 16:19:08 +00:00
* http://www.qsl.net/sm7vhs/radio/kenwood/ts940/specs.htm
*
* TODO: protocol to be check with manual!
*/
2019-11-30 16:19:08 +00:00
const struct rig_caps ts940_caps =
{
RIG_MODEL(RIG_MODEL_TS940),
2019-11-30 16:19:08 +00:00
.model_name = "TS-940S",
.mfg_name = "Kenwood",
.version = BACKEND_VER ".0",
2019-11-30 16:19:08 +00:00
.copyright = "LGPL",
2020-07-16 16:06:39 +00:00
.status = RIG_STATUS_STABLE,
2019-11-30 16:19:08 +00:00
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.timeout = 600,
.retry = 10,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = TS940_FUNC_ALL,
.has_get_level = TS940_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(TS940_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {}, /* FIXME: granularity */
.parm_gran = {},
.preamp = { RIG_DBLST_END, }, /* FIXME: preamp list */
.attenuator = { RIG_DBLST_END, }, /* TBC */
.max_rit = kHz(9.99),
.max_xit = kHz(9.99),
.max_ifshift = Hz(0),
.targetable_vfo = RIG_TARGETABLE_FREQ,
.vfo_ops = TS940_VFO_OPS,
.scan_ops = TS940_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
/* four banks of 10 memories */
.chan_list = {
{ 0, 0, RIG_MTYPE_EDGE, TS940_MEM_CAP}, /* TBC */
{ 1, 8, RIG_MTYPE_MEM, TS940_MEM_CAP}, /* TBC */
{ 9, 9, RIG_MTYPE_EDGE, TS940_MEM_CAP}, /* TBC */
RIG_CHAN_END,
},
.rx_range_list1 = {
{kHz(500), MHz(30), TS940_ALL_MODES, -1, -1, TS940_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list1 = {
FRQ_RNG_HF(1, TS940_OTHER_TX_MODES, W(5), W(250), TS940_VFO, TS940_ANTS),
FRQ_RNG_HF(1, TS940_AM_TX_MODES, W(4), W(140), TS940_VFO, TS940_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(500), MHz(30), TS940_ALL_MODES, -1, -1, TS940_VFO},
RIG_FRNG_END,
}, /* rx range */
.tx_range_list2 = {
FRQ_RNG_HF(2, TS940_OTHER_TX_MODES, W(5), W(250), TS940_VFO, TS940_ANTS),
FRQ_RNG_HF(2, TS940_AM_TX_MODES, W(4), W(140), TS940_VFO, TS940_ANTS), /* AM class */
RIG_FRNG_END,
}, /* tx range */
.tuning_steps = { /* FIXME: TBC */
{TS940_ALL_MODES, 10},
{TS940_ALL_MODES, kHz(100)},
{TS940_ALL_MODES, MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_CW, Hz(500)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY | RIG_MODE_AM, kHz(2.4)},
{RIG_MODE_FM, kHz(12)},
RIG_FLT_END,
},
.priv = (void *)& ts940_priv_caps,
.rig_init = kenwood_init,
.rig_open = kenwood_open,
2020-04-14 13:38:11 +00:00
.rig_close = kenwood_close,
2019-11-30 16:19:08 +00:00
.rig_cleanup = kenwood_cleanup,
.set_freq = kenwood_set_freq,
.get_freq = kenwood_get_freq,
.set_rit = kenwood_set_rit,
.get_rit = kenwood_get_rit,
.set_xit = kenwood_set_xit,
.get_xit = kenwood_get_xit,
.set_mode = kenwood_set_mode,
.get_mode = kenwood_get_mode_if,
.set_vfo = kenwood_set_vfo,
.get_vfo = kenwood_get_vfo_if,
.set_split_vfo = kenwood_set_split,
.get_split_vfo = kenwood_get_split_vfo_if,
.set_ptt = kenwood_set_ptt,
.get_ptt = kenwood_get_ptt,
.set_func = kenwood_set_func,
.vfo_op = kenwood_vfo_op,
.set_mem = kenwood_set_mem,
.get_mem = kenwood_get_mem_if,
.set_trn = kenwood_set_trn,
.scan = kenwood_scan,
.set_channel = kenwood_set_channel,
.get_channel = kenwood_get_channel,
};
/*
* Function definitions below
*/