Hamlib/yaesu/ft2000.c

210 wiersze
8.1 KiB
C
Czysty Zwykły widok Historia

/*
* hamlib - (C) Frank Singleton 2000 (javabear at users.sourceforge.net)
*
* ft2000.c - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* (C) Stephane Fillod 2008
* (C) Terry Embry 2008-2009
*
* This shared library provides an API for communicating
* via serial interface to an FT-2000 using the "CAT" interface
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "hamlib/rig.h"
#include "bandplan.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "newcat.h"
#include "ft2000.h"
#include "idx_builtin.h"
#include "tones.h"
/*
* ft2000 rigs capabilities.
* Also this struct is READONLY!
*
*/
const struct rig_caps ft2000_caps = {
.rig_model = RIG_MODEL_FT2000,
.model_name = "FT-2000",
.mfg_name = "Yaesu",
.version = NEWCAT_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800, /* Default rate per manual */
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 1, /* Assumed since manual makes no mention */
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = FT2000_WRITE_DELAY,
.post_write_delay = FT2000_POST_WRITE_DELAY,
.timeout = 2000,
.retry = 10,
.has_get_func = FT2000_FUNCS,
.has_set_func = FT2000_FUNCS,
.has_get_level = FT2000_LEVELS,
.has_set_level = RIG_LEVEL_SET(FT2000_LEVELS),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 1050 }, .step = { .i = 50 } },
},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, 20, RIG_DBLST_END, }, /* TBC */
.attenuator = { 6, 12, 18, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(1000),
.vfo_ops = FT2000_VFO_OPS,
.targetable_vfo = RIG_TARGETABLE_FREQ|RIG_TARGETABLE_MODE,
.transceive = RIG_TRN_OFF, /* May enable later as the 2000 has an Auto Info command */
.bank_qty = 0,
.chan_desc_sz = 0,
.str_cal = FT2000_STR_CAL,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM, NEWCAT_MEM_CAP },
{ 100, 117, RIG_MTYPE_EDGE, NEWCAT_MEM_CAP }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = {
/* General coverage + ham, ANT_5 is RX only antenna */
{kHz(30), MHz(60), FT2000_ALL_RX_MODES, -1, -1, FT2000_VFO_ALL, FT2000_TX_ANTS|RIG_ANT_5},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, FT2000_OTHER_TX_MODES, W(5), W(100), FT2000_VFO_ALL, FT2000_TX_ANTS),
FRQ_RNG_HF(1, FT2000_AM_TX_MODES, W(2), W(25), FT2000_VFO_ALL, FT2000_TX_ANTS), /* AM class */
FRQ_RNG_6m(1, FT2000_OTHER_TX_MODES, W(5), W(100), FT2000_VFO_ALL, FT2000_TX_ANTS),
FRQ_RNG_6m(1, FT2000_AM_TX_MODES, W(2), W(25), FT2000_VFO_ALL, FT2000_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(30), MHz(60), FT2000_ALL_RX_MODES, -1, -1, FT2000_VFO_ALL, FT2000_TX_ANTS|RIG_ANT_5},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, FT2000_OTHER_TX_MODES, W(5), W(100), FT2000_VFO_ALL, FT2000_TX_ANTS),
FRQ_RNG_HF(2, FT2000_AM_TX_MODES, W(2), W(25), FT2000_VFO_ALL, FT2000_TX_ANTS), /* AM class */
FRQ_RNG_6m(2, FT2000_OTHER_TX_MODES, W(5), W(100), FT2000_VFO_ALL, FT2000_TX_ANTS),
FRQ_RNG_6m(2, FT2000_AM_TX_MODES, W(2), W(25), FT2000_VFO_ALL, FT2000_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{FT2000_SSB_CW_RX_MODES, Hz(10)}, /* Normal */
{FT2000_SSB_CW_RX_MODES, Hz(100)}, /* Fast */
{FT2000_AM_RX_MODES, Hz(100)}, /* Normal */
{FT2000_AM_RX_MODES, kHz(1)}, /* Fast */
{FT2000_FM_RX_MODES, Hz(100)}, /* Normal */
{FT2000_FM_RX_MODES, kHz(1)}, /* Fast */
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{FT2000_CW_RTTY_PKT_RX_MODES, Hz(1800)}, /* Normal CW, RTTY, PKT/USER */
{FT2000_CW_RTTY_PKT_RX_MODES, Hz(500)}, /* Narrow CW, RTTY, PKT/USER */
{FT2000_CW_RTTY_PKT_RX_MODES, Hz(2400)}, /* Wide CW, RTTY, PKT/USER */
{RIG_MODE_SSB, Hz(2400)}, /* Normal SSB */
{RIG_MODE_SSB, Hz(1800)}, /* Narrow SSB */
{RIG_MODE_SSB, Hz(3000)}, /* Wide SSB */
{RIG_MODE_AM, Hz(9000)}, /* Normal AM */
{RIG_MODE_AM, Hz(6000)}, /* Narrow AM */
{FT2000_FM_RX_MODES, Hz(12000)}, /* Normal FM */
{FT2000_FM_RX_MODES, Hz(8000)}, /* Narrow FM */
RIG_FLT_END,
},
.priv = NULL,
.rig_init = newcat_init,
.rig_cleanup = newcat_cleanup,
.rig_open = newcat_open, /* port opened */
.rig_close = newcat_close, /* port closed */
.cfgparams = newcat_cfg_params,
.set_conf = newcat_set_conf,
.get_conf = newcat_get_conf,
.set_freq = newcat_set_freq,
.get_freq = newcat_get_freq,
.set_mode = newcat_set_mode,
.get_mode = newcat_get_mode,
.set_vfo = newcat_set_vfo,
.get_vfo = newcat_get_vfo,
.set_ptt = newcat_set_ptt,
.get_ptt = newcat_get_ptt,
.set_split_vfo = newcat_set_split_vfo,
.get_split_vfo = newcat_get_split_vfo,
.set_rit = newcat_set_rit,
.get_rit = newcat_get_rit,
.set_xit = newcat_set_xit,
.get_xit = newcat_get_xit,
.set_ant = newcat_set_ant,
.get_ant = newcat_get_ant,
.get_func = newcat_get_func,
.set_func = newcat_set_func,
.get_level = newcat_get_level,
.set_level = newcat_set_level,
.get_mem = newcat_get_mem,
.set_mem = newcat_set_mem,
.vfo_op = newcat_vfo_op,
.get_info = newcat_get_info,
.power2mW = newcat_power2mW,
.mW2power = newcat_mW2power,
.set_rptr_shift = newcat_set_rptr_shift,
.get_rptr_shift = newcat_get_rptr_shift,
.set_ctcss_tone = newcat_set_ctcss_tone,
.get_ctcss_tone = newcat_get_ctcss_tone,
.set_ctcss_sql = newcat_set_ctcss_sql,
.get_ctcss_sql = newcat_get_ctcss_sql,
.set_powerstat = newcat_set_powerstat,
.get_powerstat = newcat_get_powerstat,
.get_ts = newcat_get_ts,
.set_ts = newcat_set_ts,
.set_trn = newcat_set_trn,
.get_trn = newcat_get_trn,
.set_channel = newcat_set_channel,
.get_channel = newcat_get_channel,
};