Hamlib/rigs/icmarine/icm802.c

179 wiersze
6.1 KiB
C
Czysty Zwykły widok Historia

2015-01-24 17:46:34 +00:00
/*
* Hamlib ICOM Marine backend - description of IC-M802 caps
* Copyright (c) 2014-2015 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <stdlib.h>
#include "hamlib/rig.h"
#include "icmarine.h"
#include "idx_builtin.h"
#define ICM802_MODES (RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY)
#define ICM802_RX_MODES (ICM802_MODES|RIG_MODE_AM)
#define ICM802_FUNC_ALL (RIG_FUNC_NB)
#define ICM802_LEVEL_ALL (RIG_LEVEL_RFPOWER|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_AGC|RIG_LEVEL_RAWSTR)
#define ICM802_VFO_ALL (RIG_VFO_A)
#define ICM802_VFO_OPS (RIG_OP_TUNE)
#define ICM802_SCAN_OPS (RIG_SCAN_NONE)
/*
* TODO calibrate the real values
*/
#define ICM802_STR_CAL { 2, {{ 0, -60}, { 8, 60}} }
2019-11-30 16:19:08 +00:00
static const struct icmarine_priv_caps icm802_priv_caps =
{
.default_remote_id = 0x08, /* default address */
2015-01-24 17:46:34 +00:00
};
2019-11-30 16:19:08 +00:00
const struct rig_caps icm802_caps =
{
RIG_MODEL(RIG_MODEL_IC_M802),
2019-11-30 16:19:08 +00:00
.model_name = "IC-M802",
.mfg_name = "Icom",
.version = BACKEND_VER ".0",
2019-11-30 16:19:08 +00:00
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 500,
.retry = 0,
.has_get_func = ICM802_FUNC_ALL,
.has_set_func = ICM802_FUNC_ALL,
.has_get_level = ICM802_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(ICM802_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 8 } },
},
.parm_gran = {},
.str_cal = ICM802_STR_CAL,
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ICM802_VFO_OPS,
.scan_ops = ICM802_SCAN_OPS,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
RIG_CHAN_END,
},
.rx_range_list1 = { {kHz(500), MHz(30) - 100, ICM802_RX_MODES, -1, -1, ICM802_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list1 = {
{kHz(1600), MHz(3) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(4), MHz(5) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(6), MHz(7) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(8), MHz(9) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(12), MHz(14) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(16), MHz(18) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(18), MHz(20) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(22), MHz(23) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(25), MHz(27.500), ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
RIG_FRNG_END,
},
.rx_range_list2 = { {kHz(500), MHz(30) - 100, ICM802_RX_MODES, -1, -1, ICM802_VFO_ALL},
RIG_FRNG_END,
},
.tx_range_list2 = {
{kHz(1600), MHz(3) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(4), MHz(5) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(6), MHz(7) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(8), MHz(9) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(12), MHz(14) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(16), MHz(18) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(18), MHz(20) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(22), MHz(23) - 100, ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
{MHz(25), MHz(27.500), ICM802_MODES, W(20), W(150), ICM802_VFO_ALL, RIG_ANT_1},
RIG_FRNG_END,
},
.tuning_steps = {
{ICM802_RX_MODES, Hz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB | RIG_MODE_CW | RIG_MODE_RTTY, kHz(2.3)},
{RIG_MODE_AM, kHz(14)},
RIG_FLT_END,
},
.cfgparams = icmarine_cfg_params,
.set_conf = icmarine_set_conf,
.get_conf = icmarine_get_conf,
.priv = (void *)& icm802_priv_caps,
.rig_init = icmarine_init,
.rig_cleanup = icmarine_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icmarine_set_freq,
.get_freq = icmarine_get_freq,
.set_split_freq = icmarine_set_tx_freq,
.get_split_freq = icmarine_get_tx_freq,
.set_split_vfo = icmarine_set_split_vfo,
.get_split_vfo = icmarine_get_split_vfo,
.set_mode = icmarine_set_mode,
.get_mode = icmarine_get_mode,
.set_ptt = icmarine_set_ptt,
.get_ptt = icmarine_get_ptt,
.get_dcd = icmarine_get_dcd,
.vfo_op = icmarine_vfo_op,
.set_level = icmarine_set_level,
.get_level = icmarine_get_level,
.set_func = icmarine_set_func,
.get_func = icmarine_get_func,
2022-02-11 20:55:09 +00:00
.hamlib_check_rig_caps = HAMLIB_CHECK_RIG_CAPS
2015-01-24 17:46:34 +00:00
};