Hamlib/tentec/rx320.c

149 wiersze
3.7 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib TEnTenc backend - RX-320 PC-Radio capabilities
* Copyright (c) 2001 by Stephane Fillod
*
* $Id: rx320.c,v 1.1 2001-07-14 16:42:48 f4cfe Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <stdio.h> /* Standard input/output definitions */
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include <fcntl.h> /* File control definitions */
#include <errno.h> /* Error number definitions */
#include <termios.h> /* POSIX terminal control definitions */
#include <sys/ioctl.h>
#include <hamlib/rig.h>
#include <hamlib/riglist.h>
#include "tentec.h"
#define RX320_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB)
#define RX320_LEVELS (RIG_LEVEL_AGC|RIG_LEVEL_AF|RIG_LEVEL_STRENGTH)
#define RX320_VFO (RIG_VFO_A)
/*
* a bit coarse, but I don't have a RX320, and the manual is not
* verbose on the subject. Please test it and report! --SF
*/
#define RX320_STR_CAL { 2, { \
{ 0, -60 }, \
{ 10000, 20 }, \
} }
static const struct tentec_priv_caps rx320_priv_caps = {
RX320_STR_CAL
};
/*
* rx320 receiver capabilities.
*
* protocol is documented at
* http://www.tentec.com/rx320prg.zip
*
* TODO:
*/
const struct rig_caps rx320_caps = {
rig_model: RIG_MODEL_RX320,
model_name:"RX-320",
mfg_name: "Ten-Tec",
version: "0.1",
copyright: "LGPL",
status: RIG_STATUS_UNTESTED,
rig_type: RIG_TYPE_PCRECEIVER,
ptt_type: RIG_PTT_NONE,
dcd_type: RIG_DCD_NONE,
port_type: RIG_PORT_SERIAL,
serial_rate_min: 1200,
serial_rate_max: 1200,
serial_data_bits: 8,
serial_stop_bits: 1,
serial_parity: RIG_PARITY_NONE,
serial_handshake: RIG_HANDSHAKE_NONE,
write_delay: 0,
post_write_delay: 0,
timeout: 200,
retry: 3,
has_get_func: RIG_FUNC_NONE,
has_set_func: RIG_FUNC_NONE,
has_get_level: RX320_LEVELS,
has_set_level: RIG_LEVEL_SET(RX320_LEVELS),
has_get_parm: RIG_PARM_NONE,
has_set_parm: RIG_PARM_NONE,
level_gran: {}, /* FIXME: granularity */
parm_gran: {},
ctcss_list: NULL,
dcs_list: NULL,
preamp: { RIG_DBLST_END },
attenuator: { RIG_DBLST_END },
max_rit: Hz(0),
max_xit: Hz(0),
max_ifshift: Hz(0),
targetable_vfo: 0,
transceive: RIG_TRN_OFF,
bank_qty: 0,
chan_desc_sz: 0,
chan_list: {
RIG_CHAN_END,
},
rx_range_list1: { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
tx_range_list1: { RIG_FRNG_END, },
rx_range_list2: {
{kHz(100),MHz(30),RX320_MODES,-1,-1,RX320_VFO},
RIG_FRNG_END,
},
tx_range_list2: { RIG_FRNG_END, },
tuning_steps: {
{RX320_MODES,10}, /* FIXME: add other ts */
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
filters: {
{RIG_MODE_SSB|RIG_MODE_CW, kHz(2.5)},
{RIG_MODE_AM, kHz(6)},
RIG_FLT_END,
},
priv: (void*)&rx320_priv_caps,
rig_init: tentec_init,
rig_cleanup: tentec_cleanup,
set_freq: tentec_set_freq,
get_freq: tentec_get_freq,
set_mode: tentec_set_mode,
get_mode: tentec_get_mode,
set_level: tentec_set_level,
get_level: tentec_get_level,
get_info: tentec_get_info,
};
/*
* Function definitions below
*/