Hamlib/pcr/pcr1000.c

148 wiersze
4.1 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib PCR backend - PCR-1000 description
* Copyright (c) 2001 by Stephane Fillod
*
* $Id: pcr1000.c,v 1.5 2001-07-13 19:08:15 f4cfe Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <stdio.h> /* Standard input/output definitions */
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include <fcntl.h> /* File control definitions */
#include <errno.h> /* Error number definitions */
#include <termios.h> /* POSIX terminal control definitions */
#include <sys/ioctl.h>
#include <hamlib/rig.h>
#include <hamlib/riglist.h>
#include "pcr.h"
#define PCR1000_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_FM|RIG_MODE_WFM)
#define PCR1000_FUNC (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TSQL|RIG_FUNC_ANF|RIG_FUNC_NR)
#define PCR1000_LEVEL (RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_SQL|RIG_LEVEL_SQLSTAT|RIG_LEVEL_AF|RIG_LEVEL_STRENGTH)
/*
* IC PCR1000 rigs capabilities.
*/
const struct rig_caps pcr1000_caps = {
rig_model: RIG_MODEL_PCR1000,
model_name:"IC-PCR1000",
mfg_name: "Icom",
version: "0.1",
copyright: "LGPL",
status: RIG_STATUS_UNTESTED,
rig_type: RIG_TYPE_PCRECEIVER,
ptt_type: RIG_PTT_NONE,
dcd_type: RIG_DCD_RIG,
port_type: RIG_PORT_SERIAL,
serial_rate_min: 300,
serial_rate_max: 38400,
serial_data_bits: 8,
serial_stop_bits: 1,
serial_parity: RIG_PARITY_NONE,
serial_handshake: RIG_HANDSHAKE_NONE,
write_delay: 0,
post_write_delay: 0,
timeout: 200,
retry: 3,
has_get_func: RIG_FUNC_NONE,
has_set_func: PCR1000_FUNC,
has_get_level: PCR1000_LEVEL,
has_set_level: RIG_LEVEL_SET(PCR1000_LEVEL),
has_get_parm: RIG_PARM_NONE,
has_set_parm: RIG_PARM_NONE, /* FIXME: parms */
level_gran: {}, /* FIXME: granularity */
parm_gran: {},
ctcss_list: pcr1_ctcss_list,
dcs_list: NULL,
preamp: { RIG_DBLST_END, },
attenuator: { 20, RIG_DBLST_END, },
max_rit: Hz(0),
max_xit: Hz(0),
max_ifshift: Hz(1.2),
targetable_vfo: 0,
transceive: RIG_TRN_RIG,
bank_qty: 0,
chan_desc_sz: 0,
chan_list: { RIG_CHAN_END, }, /* no memory channel list: this is a PC receiver */
rx_range_list1: { {kHz(10),GHz(1.3),PCR1000_MODES,-1,-1,RIG_VFO_A},
RIG_FRNG_END, },
tx_range_list1: { RIG_FRNG_END, },
rx_range_list2: { {kHz(10),MHz(824)-10,PCR1000_MODES,-1,-1,RIG_VFO_A},
{MHz(849)+10,MHz(869)-10,PCR1000_MODES,-1,-1,RIG_VFO_A},
{MHz(894)+10,GHz(1.3),PCR1000_MODES,-1,-1,RIG_VFO_A},
RIG_FRNG_END, },
tx_range_list2: { RIG_FRNG_END, }, /* no TX ranges, this is a receiver */
tuning_steps: {
{ PCR1000_MODES,Hz(1) },
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
filters: {
{RIG_MODE_CW|RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_AM, kHz(2.8)},
{RIG_MODE_FM|RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM|RIG_MODE_AM, kHz(15)},
{RIG_MODE_WFM|RIG_MODE_FM|RIG_MODE_AM, kHz(50)},
{RIG_MODE_WFM, kHz(230)},
RIG_FLT_END,
},
priv: NULL, /* priv */
rig_init: pcr_init,
rig_cleanup: pcr_cleanup,
rig_open: NULL,
rig_close: NULL,
set_freq: pcr_set_freq,
get_freq: pcr_get_freq,
set_mode: pcr_set_mode,
get_mode: pcr_get_mode,
get_info: pcr_get_info,
/*
* TODO:
* set_trn, set_powerstat,
* set_level AF,SQL,IF,AF,ATT
* set_func: AGC,NB,TSQL, VSC?
* get_level, get_dcd, dtmf, ..
* decode_event, set_ctcss, set_ctcss_sql
* and also all the associated get_ functions.
*/
};
/*
* Function definitions below
*/