Hamlib/icom/ic706.c

590 wiersze
20 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib CI-V backend - description of IC-706 and variations
* Copyright (c) 2000-2009 by Stephane Fillod
*
* $Id: ic706.c,v 1.39 2009-02-20 14:20:23 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include "hamlib/rig.h"
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include "idx_builtin.h"
#include "bandplan.h"
/*
* This function does the special bandwidth coding for IC-706, IC-706MKII
* and IC-706MKIIG
* (0 - wide, 1 - normal, 2 - narrow)
*/
int ic706_r2i_mode(RIG *rig, rmode_t mode, pbwidth_t width,
unsigned char *md, signed char *pd)
{
int err;
err = rig2icom_mode(rig, mode, width, md, pd);
if (err != RIG_OK)
return err;
if (*pd == -1)
*pd = PD_MEDIUM_2;
else
(*pd)--;
return RIG_OK;
}
#define IC706_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM|RIG_MODE_WFM)
#define IC706_1MHZ_TS_MODES (RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_WFM)
#define IC706_1HZ_TS_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
/* tx doesn't have WFM.
* 100W in all modes but AM (40W)
*/
#define IC706_OTHER_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_USB|RIG_MODE_LSB|RIG_MODE_RTTY|RIG_MODE_FM)
#define IC706_AM_TX_MODES (RIG_MODE_AM)
#define IC706IIG_FUNC_ALL (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN)
#define IC706IIG_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_RAWSTR)
#define IC706_VFO_ALL (RIG_VFO_A|RIG_VFO_B)
#define IC706_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define IC706_SCAN_OPS (RIG_SCAN_MEM)
/*
* IC706IIG_REAL_STR_CAL is accurate measurements
* IC706IIG_STR_CAL is what the S-meter displays
*
* calibration data was obtained from W8WWV
* http://www.seed-solutions.com/gregordy/
*/
#define IC706IIG_REAL_STR_CAL { 16, \
{ \
{ 46, -27 }, /* S0 */ \
{ 54, -25 }, \
{ 64, -24 }, \
{ 76, -23 }, \
{ 84, -22 }, \
{ 94, -20 }, \
{ 104, -16 }, \
{ 113, -11 }, \
{ 123, -5 }, \
{ 133, 0 }, /* S9 */ \
{ 144, 5 }, /* +10 */ \
{ 156, 10 }, /* +20 */ \
{ 170, 16 }, /* +30 */ \
{ 181, 21 }, /* +40 */ \
{ 192, 26 }, /* +50 */ \
{ 204, 35 } /* +60 */ \
} }
#define IC706IIG_STR_CAL { 17, \
{ \
{ 45, -60 }, \
{ 46, -54 }, /* S0 */ \
{ 54, -48 }, \
{ 64, -42 }, \
{ 76, -36 }, \
{ 84, -30 }, \
{ 94, -24 }, \
{ 104, -18 }, \
{ 113, -12 }, \
{ 123, -6 }, \
{ 133, 0 }, /* S9 */ \
{ 144, 10 }, /* +10 */ \
{ 156, 20 }, /* +20 */ \
{ 170, 30 }, /* +30 */ \
{ 181, 40 }, /* +40 */ \
{ 192, 50 }, /* +50 */ \
{ 204, 60 } /* +60 */ \
} }
/*
* ic706 rigs capabilities.
* Notice that some rigs share the same functions.
* Also this struct is READONLY!
*/
static const struct icom_priv_caps ic706_priv_caps = {
0x48, /* default address */
0, /* 731 mode */
ic706_ts_sc_list,
.r2i_mode = ic706_r2i_mode
};
const struct rig_caps ic706_caps = {
.rig_model = RIG_MODEL_IC706,
.model_name = "IC-706",
.mfg_name = "Icom",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_MOBILE,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {}, /* granularity */
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END, },
.attenuator = { 20, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = { RIG_CHAN_END, }, /* FIXME: memory channel list */
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = { {kHz(30),199999999,IC706_ALL_RX_MODES,-1,-1,IC706_VFO_ALL},RIG_FRNG_END, }, /* rx range */
.tx_range_list2 = { {kHz(1800),1999999,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL}, /* 100W class */
{kHz(1800),1999999,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL}, /* 40W class */
{kHz(3500),3999999,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(3500),3999999,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(7),kHz(7300),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(7),kHz(7300),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{kHz(10100),kHz(10150),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(10100),kHz(10150),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(14),kHz(14350),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(14),kHz(14350),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{kHz(18068),kHz(18168),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(18068),kHz(18168),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(21),kHz(21450),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(21),kHz(21450),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{kHz(24890),kHz(24990),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(24890),kHz(24990),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(28),kHz(29700),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(28),kHz(29700),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(50),MHz(54),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(50),MHz(54),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(144),MHz(148),IC706_OTHER_TX_MODES,5000,20000,IC706_VFO_ALL}, /* not sure.. */
{MHz(144),MHz(148),IC706_AM_TX_MODES,2000,8000,IC706_VFO_ALL}, /* anyone? */
RIG_FRNG_END, },
.tuning_steps = {{IC706_1HZ_TS_MODES,1},
{IC706_ALL_RX_MODES,10},
{IC706_ALL_RX_MODES,100},
{IC706_ALL_RX_MODES,kHz(1)},
{IC706_ALL_RX_MODES,kHz(5)},
{IC706_ALL_RX_MODES,kHz(9)},
{IC706_ALL_RX_MODES,kHz(10)},
{IC706_ALL_RX_MODES,12500},
{IC706_ALL_RX_MODES,kHz(20)},
{IC706_ALL_RX_MODES,kHz(25)},
{IC706_ALL_RX_MODES,kHz(100)},
{IC706_1MHZ_TS_MODES,MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)}, /* bultin FL-272 */
{RIG_MODE_AM, kHz(8)}, /* mid w/ bultin FL-94 */
{RIG_MODE_AM, kHz(2.4)}, /* narrow w/ bultin FL-272 */
{RIG_MODE_FM, kHz(15)}, /* ?? TBC, mid w/ bultin FL-23+SFPC455E */
{RIG_MODE_FM, kHz(8)}, /* narrow w/ bultin FL-94 */
{RIG_MODE_WFM, kHz(230)}, /* WideFM, filter FL?? */
RIG_FLT_END,
},
.str_cal = IC706IIG_STR_CAL,
.priv = (void*)&ic706_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ts = icom_set_ts,
.set_rptr_shift = icom_set_rptr_shift,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
};
static const struct icom_priv_caps ic706mkii_priv_caps = {
0x4e, /* default address */
0, /* 731 mode */
ic706_ts_sc_list,
.r2i_mode = ic706_r2i_mode
};
const struct rig_caps ic706mkii_caps = {
.rig_model = RIG_MODEL_IC706MKII,
.model_name = "IC-706MkII",
.mfg_name = "Icom",
.version = BACKEND_VER,
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_MOBILE,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {}, /* granularity */
.parm_gran = {},
.ctcss_list = NULL,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END, },
.attenuator = { 20, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = { RIG_CHAN_END, }, /* FIXME: memory channel list */
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = { {kHz(30),199999999,IC706_ALL_RX_MODES,-1,-1,IC706_VFO_ALL},
RIG_FRNG_END, }, /* rx range */
.tx_range_list2 = { {kHz(1800),1999999,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL}, /* 100W class */
{kHz(1800),1999999,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL}, /* 40W class */
{kHz(3500),3999999,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(3500),3999999,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(7),kHz(7300),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(7),kHz(7300),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{kHz(10100),kHz(10150),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(10100),kHz(10150),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(14),kHz(14350),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(14),kHz(14350),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{kHz(18068),kHz(18168),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(18068),kHz(18168),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(21),kHz(21450),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(21),kHz(21450),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{kHz(24890),kHz(24990),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(24890),kHz(24990),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(28),kHz(29700),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(28),kHz(29700),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(50),MHz(54),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(50),MHz(54),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(144),MHz(148),IC706_OTHER_TX_MODES,5000,20000,IC706_VFO_ALL}, /* not sure.. */
{MHz(144),MHz(148),IC706_AM_TX_MODES,2000,8000,IC706_VFO_ALL}, /* anyone? */
RIG_FRNG_END, },
.tuning_steps = {
{IC706_1HZ_TS_MODES,1},
{IC706_ALL_RX_MODES,10},
{IC706_ALL_RX_MODES,100},
{IC706_ALL_RX_MODES,kHz(1)},
{IC706_ALL_RX_MODES,kHz(5)},
{IC706_ALL_RX_MODES,kHz(9)},
{IC706_ALL_RX_MODES,kHz(10)},
{IC706_ALL_RX_MODES,12500},
{IC706_ALL_RX_MODES,kHz(20)},
{IC706_ALL_RX_MODES,kHz(25)},
{IC706_ALL_RX_MODES,kHz(100)},
{IC706_1MHZ_TS_MODES,MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)}, /* bultin FL-272 */
{RIG_MODE_AM, kHz(8)}, /* mid w/ bultin FL-94 */
{RIG_MODE_AM, kHz(2.4)}, /* narrow w/ bultin FL-272 */
{RIG_MODE_FM, kHz(15)}, /* ?? TBC, mid w/ bultin FL-23+SFPC455E */
{RIG_MODE_FM, kHz(8)}, /* narrow w/ bultin FL-94 */
{RIG_MODE_WFM, kHz(230)}, /* WideFM, filter FL?? */
RIG_FLT_END,
},
.str_cal = IC706IIG_STR_CAL,
.priv = (void*)&ic706mkii_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ts = icom_set_ts,
.set_rptr_shift = icom_set_rptr_shift,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
};
/*
* IC706MkIIG channel caps.
*/
#define IC706MKIIG_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1, \
.split = 1, \
.tx_freq = 1, \
.tx_mode = 1, \
.tx_width = 1, \
.rptr_offs = 1, \
.rptr_shift = 1, /* only set */ \
.funcs = IC706IIG_FUNC_ALL, \
.levels = RIG_LEVEL_SET(IC706IIG_LEVEL_ALL), \
}
/*
* Basically, the IC706MKIIG is an IC706MKII plus UHF, a DSP
* and 50W VHF
*/
static const struct icom_priv_caps ic706mkiig_priv_caps = {
0x58, /* default address */
0, /* 731 mode */
ic706_ts_sc_list,
.r2i_mode = ic706_r2i_mode
};
const struct rig_caps ic706mkiig_caps = {
.rig_model = RIG_MODEL_IC706MKIIG,
.model_name = "IC-706MkIIG",
.mfg_name = "Icom",
.version = BACKEND_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_MOBILE,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 19200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = IC706IIG_FUNC_ALL,
.has_set_func = IC706IIG_FUNC_ALL,
.has_get_level = IC706IIG_LEVEL_ALL,
.has_set_level = RIG_LEVEL_SET(IC706IIG_LEVEL_ALL),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, RIG_DBLST_END, },
.attenuator = { 20, RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = IC706_VFO_OPS,
.scan_ops = IC706_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM, IC706MKIIG_MEM_CAP },
{ 100, 105, RIG_MTYPE_EDGE, IC706MKIIG_MEM_CAP }, /* two by two */
{ 106, 107, RIG_MTYPE_CALL, IC706MKIIG_MEM_CAP },
RIG_CHAN_END,
},
.rx_range_list1 = { {kHz(30),MHz(200)-1,IC706_ALL_RX_MODES,-1,-1,IC706_VFO_ALL}, /* this trx also has UHF */
{MHz(400),MHz(470),IC706_ALL_RX_MODES,-1,-1,IC706_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list1 = {
FRQ_RNG_HF(1, IC706_OTHER_TX_MODES, W(5),W(100),IC706_VFO_ALL,RIG_ANT_1),
FRQ_RNG_HF(1, IC706_AM_TX_MODES, W(2),W(40), IC706_VFO_ALL,RIG_ANT_1), /* AM class */
FRQ_RNG_6m(1, IC706_OTHER_TX_MODES, W(5),W(100),IC706_VFO_ALL,RIG_ANT_1),
FRQ_RNG_6m(1, IC706_AM_TX_MODES, W(2),W(40), IC706_VFO_ALL,RIG_ANT_1), /* AM class */
FRQ_RNG_2m(1, IC706_OTHER_TX_MODES, W(5),W(50),IC706_VFO_ALL,RIG_ANT_1),
FRQ_RNG_2m(1, IC706_AM_TX_MODES, W(2),W(20), IC706_VFO_ALL,RIG_ANT_1), /* AM class */
FRQ_RNG_70cm(1, IC706_OTHER_TX_MODES, W(5),W(20),IC706_VFO_ALL,RIG_ANT_1),
FRQ_RNG_70cm(1, IC706_AM_TX_MODES, W(2),W(8), IC706_VFO_ALL,RIG_ANT_1), /* AM class */
RIG_FRNG_END, },
.rx_range_list2 = { {kHz(30),MHz(200)-1,IC706_ALL_RX_MODES,-1,-1,IC706_VFO_ALL}, /* this trx also has UHF */
{MHz(400),MHz(470),IC706_ALL_RX_MODES,-1,-1,IC706_VFO_ALL},
RIG_FRNG_END, },
.tx_range_list2 = { {kHz(1800),MHz(2)-1,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL}, /* 100W class */
{kHz(1800),MHz(2)-1,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL}, /* 40W class */
{kHz(3500),MHz(4)-1,IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(3500),MHz(4)-1,IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(7),kHz(7300),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(7),kHz(7300),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{kHz(10100),kHz(10150),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(10100),kHz(10150),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(14),kHz(14350),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(14),kHz(14350),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{kHz(18068),kHz(18168),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(18068),kHz(18168),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(21),kHz(21450),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(21),kHz(21450),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{kHz(24890),kHz(24990),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{kHz(24890),kHz(24990),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(28),kHz(29700),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(28),kHz(29700),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(50),MHz(54),IC706_OTHER_TX_MODES,5000,100000,IC706_VFO_ALL},
{MHz(50),MHz(54),IC706_AM_TX_MODES,2000,40000,IC706_VFO_ALL},
{MHz(144),MHz(148),IC706_OTHER_TX_MODES,5000,50000,IC706_VFO_ALL}, /* 50W */
{MHz(144),MHz(148),IC706_AM_TX_MODES,2000,20000,IC706_VFO_ALL}, /* AM VHF is 20W */
{MHz(430),MHz(450),IC706_OTHER_TX_MODES,5000,20000,IC706_VFO_ALL},
{MHz(430),MHz(450),IC706_AM_TX_MODES,2000,8000,IC706_VFO_ALL},
RIG_FRNG_END, },
.tuning_steps = {
{IC706_1HZ_TS_MODES,1},
{IC706_ALL_RX_MODES,10},
{IC706_ALL_RX_MODES,100},
{IC706_ALL_RX_MODES,kHz(1)},
{IC706_ALL_RX_MODES,kHz(5)},
{IC706_ALL_RX_MODES,kHz(9)},
{IC706_ALL_RX_MODES,kHz(10)},
{IC706_ALL_RX_MODES,12500},
{IC706_ALL_RX_MODES,kHz(20)},
{IC706_ALL_RX_MODES,kHz(25)},
{IC706_ALL_RX_MODES,kHz(100)},
{IC706_1MHZ_TS_MODES,MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)}, /* bultin FL-272 */
{RIG_MODE_AM, kHz(8)}, /* mid w/ bultin FL-94 */
{RIG_MODE_AM, kHz(2.4)}, /* narrow w/ bultin FL-272 */
{RIG_MODE_FM, kHz(15)}, /* ?? TBC, mid w/ bultin FL-23+SFPC455E */
{RIG_MODE_FM, kHz(8)}, /* narrow w/ bultin FL-94 */
{RIG_MODE_WFM, kHz(230)}, /* WideFM, filter FL?? */
RIG_FLT_END,
},
.str_cal = IC706IIG_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&ic706mkiig_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.decode_event = icom_decode_event,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.set_ptt = icom_set_ptt,
.get_ptt = icom_get_ptt,
.get_dcd = icom_get_dcd,
.set_ts = icom_set_ts,
.set_rptr_shift = icom_set_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_split_freq = icom_set_split_freq,
.get_split_freq = icom_get_split_freq,
.set_split_mode = icom_set_split_mode,
.get_split_mode = icom_get_split_mode,
.set_split_vfo = icom_set_split_vfo,
.get_split_vfo = icom_mem_get_split_vfo,
};