Hamlib/kenwood/ts930.c

/*
 *  Hamlib Kenwood backend - TS930 description
 *  Copyright (c) 2000-2003 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include <bandplan.h>
#include "kenwood.h"


#define TS930_ALL_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
#define TS930_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY)
#define TS930_AM_TX_MODES RIG_MODE_AM

/* FIXME: TBC */
#define TS930_FUNC_ALL (RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_NR|RIG_FUNC_ANF|RIG_FUNC_LOCK)

#define TS930_LEVEL_ALL (RIG_LEVEL_ATT|RIG_LEVEL_SQL|RIG_LEVEL_STRENGTH|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_AGC)

#define TS930_VFO (RIG_VFO_A|RIG_VFO_B)
#define TS930_ANTS (0)

static struct kenwood_priv_caps  ts930_priv_caps  = {
		.cmdtrm =  EOM_KEN,
};

/*
 * ts930 rig capabilities.
 * Notice that some rigs share the same functions.
 * Also this struct is READONLY!
 *
 * part of infos comes from .http = //www.kenwood.net/
 */
const struct rig_caps ts930_caps = {
.rig_model =  RIG_MODEL_TS930,
.model_name = "TS-930",
.mfg_name =  "Kenwood",
.version =  BACKEND_VER,
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_TRANSCEIVER,
.ptt_type =  RIG_PTT_RIG,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  1200,
.serial_rate_max =  57600,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  10,

.has_get_func =  TS930_FUNC_ALL,
.has_set_func =  TS930_FUNC_ALL,
.has_get_level =  TS930_LEVEL_ALL,
.has_set_level =  RIG_LEVEL_SET(TS930_LEVEL_ALL),
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,    /* FIXME: parms */
.level_gran =  {},                 /* FIXME: granularity */
.parm_gran =  {},
.preamp =   { RIG_DBLST_END, },	/* FIXME: preamp list */
.attenuator =   { 6, 12, 18, RIG_DBLST_END, },	/* TBC */
.max_rit =  kHz(9.99),
.max_xit =  kHz(9.99),
.max_ifshift =  Hz(0),
.targetable_vfo =  RIG_TARGETABLE_FREQ,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,


.chan_list =  {
			{  0, 89, RIG_MTYPE_MEM  },	/* TBC */
			{ 90, 99, RIG_MTYPE_EDGE },
			RIG_CHAN_END,
		},

.rx_range_list1 =  {
	{kHz(150),MHz(30),TS930_ALL_MODES,-1,-1,TS930_VFO},
	RIG_FRNG_END,
  }, /* rx range */
.tx_range_list1 =  {
	FRQ_RNG_HF(1,TS930_OTHER_TX_MODES, W(5),W(250),TS930_VFO,TS930_ANTS),
	FRQ_RNG_HF(1,TS930_AM_TX_MODES, W(4),W(80),TS930_VFO,TS930_ANTS),   /* AM class */
	RIG_FRNG_END,
  },

.rx_range_list2 =  {
	{kHz(150),MHz(30),TS930_ALL_MODES,-1,-1,TS930_VFO},
	RIG_FRNG_END,
  }, /* rx range */
.tx_range_list2 =  {
	FRQ_RNG_HF(1,TS930_OTHER_TX_MODES, W(5),W(250),TS930_VFO,TS930_ANTS),
	FRQ_RNG_HF(1,TS930_AM_TX_MODES, W(4),W(80),TS930_VFO,TS930_ANTS),   /* AM class */
	RIG_FRNG_END,
  }, /* tx range */
.tuning_steps =  {		/* FIXME: TBC */
	 {TS930_ALL_MODES,50},
	 {TS930_ALL_MODES,100},
	 {TS930_ALL_MODES,kHz(1)},
	 {TS930_ALL_MODES,kHz(5)},
	 {TS930_ALL_MODES,kHz(9)},
	 {TS930_ALL_MODES,kHz(10)},
	 {TS930_ALL_MODES,12500},
	 {TS930_ALL_MODES,kHz(20)},
	 {TS930_ALL_MODES,kHz(25)},
	 {TS930_ALL_MODES,kHz(100)},
	 {TS930_ALL_MODES,MHz(1)},
	 RIG_TS_END,
	},
        /* mode/filter list, remember: order matters! */
.filters =  {
		{RIG_MODE_AM, kHz(6)},
		{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY|RIG_MODE_AM, kHz(2.7)},
		RIG_FLT_END,
	},
.priv =  (void *)&ts930_priv_caps,

.rig_init = kenwood_init,
.rig_cleanup = kenwood_cleanup,
.set_freq =  kenwood_set_freq,
.get_freq =  kenwood_get_freq,
.set_rit =  kenwood_set_rit,
.get_rit =  kenwood_get_rit,
.set_xit =  kenwood_set_xit,
.get_xit =  kenwood_get_xit,
.set_mode =  kenwood_set_mode,
.get_mode =  kenwood_get_mode,
.set_vfo =  kenwood_set_vfo,
.get_vfo =  kenwood_get_vfo_if,
.get_ptt =  kenwood_get_ptt,
.set_ptt =  kenwood_set_ptt,
.get_dcd =  kenwood_get_dcd,
.set_func =  kenwood_set_func,
.get_func =  kenwood_get_func,
.set_level =  kenwood_set_level,
.get_level =  kenwood_get_level,
.vfo_op =  kenwood_vfo_op,
.set_mem =  kenwood_set_mem,
.get_mem =  kenwood_get_mem,
.set_trn =  kenwood_set_trn,
.get_trn =  kenwood_get_trn,
.set_powerstat =  kenwood_set_powerstat,
.get_powerstat =  kenwood_get_powerstat,
.reset =  kenwood_reset,

};

/*
 * Function definitions below
 */