kopia lustrzana https://github.com/PiInTheSky/lora-gateway
Fix formatting of README.md
There seem to be some <U+200B> characters (zero width space) messing up the fixed-width markdown formatting for the channel-specific options. Removed these and all is well.pull/72/head
rodzic
a9924c9e59
commit
9dcfa8df6c
42
README.md
42
README.md
|
@ -124,7 +124,7 @@ The global options are:
|
|||
|
||||
EnableHabitat=<Y/N>. Enables uploading of telemetry packets to Habitat.
|
||||
|
||||
EnableSondehub=<Y/N>. Enables uploading of telemetry packets to the amateur Sondehub system.
|
||||
EnableSondhub=<Y/N>. Enables uploading of telemetry packets to the amateur Sondehub system.
|
||||
|
||||
EnableSSDV=<Y/N>. Enables uploading of SSDV image packets to the SSDV server.
|
||||
|
||||
|
@ -160,28 +160,26 @@ The global options are:
|
|||
ActivityLED_0=<wiring pi pin>
|
||||
ActivityLED_1=<wiring pi pin>. These are used for LED status indicators. Useful for packaged gateways that don't have a monitor attached.
|
||||
|
||||
|
||||
|
||||
and the channel-specific options are:
|
||||
|
||||
frequency_<n>=<freq in MHz>. This sets the frequency for LoRa module <n> (0 for first, 1 for second). e.g. frequency_0=434.450
|
||||
|
||||
PPM_<n>=<Parts per million offset of LoRa module.
|
||||
|
||||
AFC_<n>=<Y/N>. Enables or disables automatic frequency control (retunes by the frequency error of last received packet).
|
||||
|
||||
mode_<n>=<mode>. Sets the "mode" for the selected LoRa module. This offers a simple way of setting the various
|
||||
LoRa parameters (SF etc.) in one go. The modes are:
|
||||
|
||||
0 = (normal for telemetry) Explicit mode, Error coding 4:8, Bandwidth 20.8kHz, SF 11, Low data rate optimize on
|
||||
1 = (normal for SSDV) Implicit mode, Error coding 4:5, Bandwidth 20.8kHz, SF 6, Low data rate optimize off
|
||||
2 = (normal for repeater) Explicit mode, Error coding 4:8, Bandwidth 62.5kHz, SF 8, Low data rate optimize off
|
||||
3 = (normal for fast SSDV) Explicit mode, Error coding 4:6, Bandwidth 250kHz, SF 7, Low data rate optimize off
|
||||
4 = Test mode not for normal use.
|
||||
5 = (normal for calling mode) Explicit mode, Error coding 4:8, Bandwidth 41.7kHz, SF 11, Low data rate optimize off
|
||||
|
||||
SF_<n>=<Spreading Factor> e.g. SF_0=7
|
||||
|
||||
|
||||
frequency_<n>=<freq in MHz>. This sets the frequency for LoRa module <n> (0 for first, 1 for second). e.g. frequency_0=434.450
|
||||
|
||||
PPM_<n>=<Parts per million offset of LoRa module.
|
||||
|
||||
AFC_<n>=<Y/N>. Enables or disables automatic frequency control (retunes by the frequency error of last received packet).
|
||||
|
||||
mode_<n>=<mode>. Sets the "mode" for the selected LoRa module. This offers a simple way of setting the various
|
||||
LoRa parameters (SF etc.) in one go. The modes are:
|
||||
|
||||
0 = (normal for telemetry) Explicit mode, Error coding 4:8, Bandwidth 20.8kHz, SF 11, Low data rate optimize on
|
||||
1 = (normal for SSDV) Implicit mode, Error coding 4:5, Bandwidth 20.8kHz, SF 6, Low data rate optimize off
|
||||
2 = (normal for repeater) Explicit mode, Error coding 4:8, Bandwidth 62.5kHz, SF 8, Low data rate optimize off
|
||||
3 = (normal for fast SSDV) Explicit mode, Error coding 4:6, Bandwidth 250kHz, SF 7, Low data rate optimize off
|
||||
4 = Test mode not for normal use.
|
||||
5 = (normal for calling mode) Explicit mode, Error coding 4:8, Bandwidth 41.7kHz, SF 11, Low data rate optimize off
|
||||
|
||||
SF_<n>=<Spreading Factor> e.g. SF_0=7
|
||||
|
||||
Bandwidth_<n>=<Bandwidth>. e.g. Bandwidth_0=41K7. Options are 7K8, 10K4, 15K6, 20K8, 31K25, 41K7, 62K5, 125K, 250K, 500K
|
||||
|
||||
Implicit_<n>=<Y/N>. e.g. Implicit_0=Y
|
||||
|
|
Ładowanie…
Reference in New Issue