#Driver for Sainsmart 1.8" tft display ST7735
#Translated by Guy Carver from the ST7735 sample code.
#Display uses SPI interface.

#todo: Use const()

import pyb
from math import sqrt

@micropython.native
def clamp( aValue, aMin, aMax ) :
  return max(aMin, min(aMax, aValue))

@micropython.native
def TFTColor( aR, aG, aB ) :
  '''Create a 16 bit rgb value from the given R,G,B from 0-255.
     This assumes rgb 565 layout and will be incorrect for bgr.'''
  return ((aR & 0xF8) << 8) | ((aG & 0xFC) << 3) | (aB >> 3)


class tft(object) :
  '''Sainsmart tft-7735 display driver.'''

  #TFTRotations and TFTRGB are bits to set
  # on MADCTL to control display rotation/color layout
  #Looking at display with pins on top.
  #00 = upper left printing right
  #10 = does nothing (MADCTL_ML)
  #20 = upper left printing down (backwards) (Vertical flip)
  #40 = upper right printing left (backwards) (X Flip)
  #80 = lower left printing right (backwards) (Y Flip)
  #04 = (MADCTL_MH)
  #60 = 90 right rotation
  #C0 = 180 right rotation
  #A0 = 270 right rotation
  _TFTRotations = [0x00, 0x60, 0xC0, 0xA0]
  _TFTBGR = const(0x08) #When set color is bgr else rgb.
  _TFTRGB = const(0x00)

  _NOP = const(0x0)
  _SWRESET = const(0x01)
  _RDDID = const(0x04)
  _RDDST = const(0x09)

  _SLPIN  = const(0x10)
  _SLPOUT  = const(0x11)
  _PTLON  = const(0x12)
  _NORON  = const(0x13)

  _INVOFF = const(0x20)
  _INVON = const(0x21)
  _DISPOFF = const(0x28)
  _DISPON = const(0x29)
  _CASET = const(0x2A)
  _RASET = const(0x2B)
  _RAMWR = const(0x2C)
  _RAMRD = const(0x2E)

  _COLMOD = const(0x3A)
  _MADCTL = const(0x36)

  _FRMCTR1 = const(0xB1)
  _FRMCTR2 = const(0xB2)
  _FRMCTR3 = const(0xB3)
  _INVCTR = const(0xB4)
  _DISSET5 = const(0xB6)

  _PWCTR1 = const(0xC0)
  _PWCTR2 = const(0xC1)
  _PWCTR3 = const(0xC2)
  _PWCTR4 = const(0xC3)
  _PWCTR5 = const(0xC4)
  _VMCTR1 = const(0xC5)

  _RDID1 = const(0xDA)
  _RDID2 = const(0xDB)
  _RDID3 = const(0xDC)
  _RDID4 = const(0xDD)

  _PWCTR6 = const(0xFC)

  _GMCTRP1 = const(0xE0)
  _GMCTRN1 = const(0xE1)

  _BLACK = 0
  _RED = TFTColor(0xFF, 0x00, 0x00)
  _MAROON = TFTColor(0x80, 0x00, 0x00)
  _GREEN = TFTColor(0x00, 0xFF, 0x00)
  _FOREST = TFTColor(0x00, 0x80, 0x80)
  _BLUE = TFTColor(0x00, 0x00, 0xFF)
  _NAVY = TFTColor(0x00, 0x00, 0x80)
  _CYAN = TFTColor(0x00, 0xFF, 0xFF)
  _YELLOW = TFTColor(0xFF, 0xFF, 0x00)
  _PURPLE = TFTColor(0xFF, 0x00, 0xFF)
  _WHITE = TFTColor(0xFF, 0xFF, 0xFF)
  _GRAY = TFTColor(0x80, 0x80, 0x80)

  _SCREENSIZE = (128, 160)

  @staticmethod
  def color( aR, aG, aB ) :
    '''Create a 565 rgb TFTColor value'''
    return TFTColor(aR, aG, aB)

  def __init__( self, aLoc, aDC, aReset ) :
    '''aLoc SPI pin location is either 1 for 'X' or 2 for 'Y'.
       aDC is the DC pin and aReset is the reset pin.'''
    self._size = tft._SCREENSIZE
    self.rotate = 0                    #Vertical with top toward pins.
    self._rgb = True                   #color order of rgb.
    self.dc  = pyb.Pin(aDC, pyb.Pin.OUT_PP, pyb.Pin.PULL_DOWN)
    self.reset = pyb.Pin(aReset, pyb.Pin.OUT_PP, pyb.Pin.PULL_DOWN)
    rate = 200000 #100000000 #Set way high but will be clamped to a maximum in SPI constructor.
    cs = "X5" if aLoc == 1 else "Y5"
    self.cs = pyb.Pin(cs, pyb.Pin.OUT_PP, pyb.Pin.PULL_DOWN)
    self.cs.high()
    self.spi = pyb.SPI(aLoc, pyb.SPI.MASTER, baudrate = rate, polarity = 1, phase = 0, crc=None)
    self.colorData = bytearray(2)
    self.windowLocData = bytearray(4)

  def size( self ) :
    return self._size

  def on( self, aTF = True ) :
    '''Turn display on or off.'''
    self._writecommand(_DISPON if aTF else _DISPOFF)

  def invertcolor( self, aBool ) :
    '''Invert the color data IE: Black = White.'''
    self._writecommand(_INVON if aBool else _INVOFF)

  def rgb( self, aTF = True ) :
    '''True = rgb else bgr'''
    self._rgb = aTF
    self._setMADCTL()

  def rotation( self, aRot ) :
    '''0 - 3. Starts vertical with top toward pins and rotates 90 deg
       clockwise each step.'''
    if (0 <= aRot < 4):
      rotchange = self.rotate ^ aRot
      self.rotate = aRot
      #If switching from vertical to horizontal swap x,y
      # (indicated by bit 0 changing).
      if (rotchange & 1):
        self._size =(self._size[1], self._size[0])
      self._setMADCTL()

  @micropython.native
  def pixel( self, aPos, aColor ) :
    '''Draw a pixel at the given position'''
    if 0 <= aPos[0] < self._size[0] and 0 <= aPos[1] < self._size[1]:
      self._setwindowpoint(aPos)
      self._pushcolor(aColor)

  def text( self, aPos, aString, aColor, aFont, aSize = 1 ) :
    '''Draw a text at the given position.  If the string reaches the end of the
       display it is wrapped to aPos[0] on the next line.  aSize may be an integer
       which will size the font uniformly on w,h or a or any type that may be
       indexed with [0] or [1].'''

    if aFont == None:
      return

    #Make a size either from single value or 2 elements.
    if (type(aSize) == int) or (type(aSize) == float):
      wh = (aSize, aSize)
    else:
      wh = aSize

    px, py = aPos
    width = wh[0] * aFont["Width"] + 1
    for c in aString:
      self.char((px, py), c, aColor, aFont, wh)
      px += width
      #We check > rather than >= to let the right (blank) edge of the
      # character print off the right of the screen.
      if px + width > self._size[0]:
        py += aFont["Height"] * wh[1] + 1
        px = aPos[0]

  def char( self, aPos, aChar, aColor, aFont, aSizes ) :
    '''Draw a character at the given position using the given font and color.
       aSizes is a tuple with x, y as integer scales indicating the
       # of pixels to draw for each pixel in the character.'''

    if aFont == None:
      return

    startchar = aFont['Start']
    endchar = aFont['End']

    ci = ord(aChar)
    if (startchar <= ci <= endchar):
      fontw = aFont['Width']
      fonth = aFont['Height']
      ci = (ci - startchar) * fontw

      charA = aFont["Data"][ci:ci + fontw]
      px = aPos[0]
      if aSizes[0] <= 1 and aSizes[1] <= 1 :
        for c in charA :
          py = aPos[1]
          for r in range(fonth) :
            if c & 0x01 :
              self.pixel((px, py), aColor)
            py += 1
            c >>= 1
          px += 1
      else:
        for c in charA :
          py = aPos[1]
          for r in range(fonth) :
            if c & 0x01 :
              self.fillrect((px, py), aSizes, aColor)
            py += aSizes[1]
            c >>= 1
          px += aSizes[0]

  def line( self, aStart, aEnd, aColor ) :
    '''Draws a line from aStart to aEnd in the given color.  Vertical or horizontal
       lines are forwarded to vline and hline.'''
    if aStart[0] == aEnd[0]:
      #Make sure we use the smallest y.
      pnt = aEnd if (aEnd[1] < aStart[1]) else aStart
      self.vline(pnt, abs(aEnd[1] - aStart[1]) + 1, aColor)
    elif aStart[1] == aEnd[1]:
      #Make sure we use the smallest x.
      pnt = aEnd if aEnd[0] < aStart[0] else aStart
      self.hline(pnt, abs(aEnd[0] - aStart[0]) + 1, aColor)
    else:
      px, py = aStart
      ex, ey = aEnd
      dx = ex - px
      dy = ey - py
      inx = 1 if dx > 0 else -1
      iny = 1 if dy > 0 else -1

      dx = abs(dx)
      dy = abs(dy)
      if (dx >= dy):
        dy <<= 1
        e = dy - dx
        dx <<= 1
        while (px != ex):
          self.pixel((px, py), aColor)
          if (e >= 0):
            py += iny
            e -= dx
          e += dy
          px += inx
      else:
        dx <<= 1
        e = dx - dy
        dy <<= 1
        while (py != ey):
          self.pixel((px, py), aColor)
          if (e >= 0):
            px += inx
            e -= dy
          e += dx
          py += iny

  def vline( self, aStart, aLen, aColor ) :
    '''Draw a vertical line from aStart for aLen. aLen may be negative.'''
    start = (clamp(aStart[0], 0, self._size[0]), clamp(aStart[1], 0, self._size[1]))
    stop = (start[0], clamp(start[1] + aLen, 0, self._size[1]))
    #Make sure smallest y 1st.
    if (stop[1] < start[1]):
      start, stop = stop, start
    self._setwindowloc(start, stop)
    self._draw(aLen, aColor)

  def hline( self, aStart, aLen, aColor ) :
    '''Draw a horizontal line from aStart for aLen. aLen may be negative.'''
    start = (clamp(aStart[0], 0, self._size[0]), clamp(aStart[1], 0, self._size[1]))
    stop = (clamp(start[0] + aLen, 0, self._size[0]), start[1])
    #Make sure smallest x 1st.
    if (stop[0] < start[0]):
      start, stop = stop, start
    self._setwindowloc(start, stop)
    self._draw(aLen, aColor)

  def rect( self, aStart, aSize, aColor ) :
    '''Draw a hollow rectangle.  aStart is the smallest coordinate corner
       and aSize is a tuple indicating width, height.'''
    self.hline(aStart, aSize[0], aColor)
    self.hline((aStart[0], aStart[1] + aSize[1] - 1), aSize[0], aColor)
    self.vline(aStart, aSize[1], aColor)
    self.vline((aStart[0] + aSize[0] - 1, aStart[1]), aSize[1], aColor)

  def fillrect( self, aStart, aSize, aColor ) :
    '''Draw a filled rectangle.  aStart is the smallest coordinate corner
       and aSize is a tuple indicating width, height.'''
    start = (clamp(aStart[0], 0, self._size[0]), clamp(aStart[1], 0, self._size[1]))
    end = (clamp(start[0] + aSize[0] - 1, 0, self._size[0]), clamp(start[1] + aSize[1] - 1, 0, self._size[1]))

    if (end[0] < start[0]):
      tmp = end[0]
      end = (start[0], end[1])
      start = (tmp, start[1])
    if (end[1] < start[1]):
      tmp = end[1]
      end = (end[0], start[1])
      start = (start[0], tmp)

    self._setwindowloc(start, end)
    numPixels = (end[0] - start[0] + 1) * (end[1] - start[1] + 1)
    self._draw(numPixels, aColor)

  def circle( self, aPos, aRadius, aColor ) :
    '''Draw a hollow circle with the given radius and color with aPos as center.'''
    self.colorData[0] = aColor >> 8
    self.colorData[1] = aColor
    xend = int(0.7071 * aRadius) + 1
    rsq = aRadius * aRadius
    for x in range(xend) :
      y = int(sqrt(rsq - x * x))
      xp = aPos[0] + x
      yp = aPos[1] + y
      xn = aPos[0] - x
      yn = aPos[1] - y
      xyp = aPos[0] + y
      yxp = aPos[1] + x
      xyn = aPos[0] - y
      yxn = aPos[1] - x

      self._setwindowpoint((xp, yp))
      self._writedata(self.colorData)
      self._setwindowpoint((xp, yn))
      self._writedata(self.colorData)
      self._setwindowpoint((xn, yp))
      self._writedata(self.colorData)
      self._setwindowpoint((xn, yn))
      self._writedata(self.colorData)
      self._setwindowpoint((xyp, yxp))
      self._writedata(self.colorData)
      self._setwindowpoint((xyp, yxn))
      self._writedata(self.colorData)
      self._setwindowpoint((xyn, yxp))
      self._writedata(self.colorData)
      self._setwindowpoint((xyn, yxn))
      self._writedata(self.colorData)

  def fillcircle( self, aPos, aRadius, aColor ) :
    '''Draw a filled circle with given radius and color with aPos as center'''
    rsq = aRadius * aRadius
    for x in range(aRadius) :
      y = int(sqrt(rsq - x * x))
      y0 = aPos[1] - y
      ey = y0 + y * 2
      y0 = clamp(y0, 0, self._size[1])
      ln = abs(ey - y0) + 1;

      self.vline((aPos[0] + x, y0), ln, aColor)
      self.vline((aPos[0] - x, y0), ln, aColor)

  def fill( self, aColor = BLACK ) :
    '''Fill screen with the given color.'''
    self.fillrect((0, 0), self._size, aColor)

  def _draw( self, aPixels, aColor ) :
    '''Send given color to the device aPixels times.'''
    self.colorData[0] = aColor >> 8
    self.colorData[1] = aColor

    self.dc.high()
    self.cs.low()
    for i in range(aPixels):
      self.spi.send(self.colorData)
    self.cs.high()

  def _setwindowpoint( self, aPos ) :
    '''Set a single point for drawing a color to.'''
    x = int(aPos[0])
    y = int(aPos[1])
    self._writecommand(_CASET)            #Column address set.
    self.windowLocData[0] = 0x00
    self.windowLocData[1] = x
    self.windowLocData[2] = 0x00
    self.windowLocData[3] = x
    self._writedata(self.windowLocData)

    self._writecommand(_RASET)            #Row address set.
    self.windowLocData[1] = y
    self.windowLocData[3] = y
    self._writedata(self.windowLocData)
    self._writecommand(_RAMWR)            #Write to RAM.

  def _setwindowloc( self, aPos0, aPos1 ) :
    '''Set a rectangular area for drawing a color to.'''
    self._writecommand(_CASET)            #Column address set.
    self.windowLocData[0] = 0x00
    self.windowLocData[1] = int(aPos0[0])
    self.windowLocData[2] = 0x00
    self.windowLocData[3] = int(aPos1[0])
    self._writedata(self.windowLocData)

    self._writecommand(_RASET)            #Row address set.
    self.windowLocData[1] = int(aPos0[1])
    self.windowLocData[3] = int(aPos1[1])
    self._writedata(self.windowLocData)

    self._writecommand(_RAMWR)            #Write to RAM.

  @micropython.native
  def _writecommand( self, aCommand ) :
    '''Write given command to the device.'''
    self.dc.low()
    self.cs.low()
    self.spi.send(aCommand)
    self.cs.high()

  @micropython.native
  def _writedata( self, aData ) :
    '''Write given data to the device.  This may be
       either a single int or a bytearray of values.'''
    self.dc.high()
    self.cs.low()
    self.spi.send(aData)
    self.cs.high()

  @micropython.native
  def _pushcolor( self, aColor ) :
    '''Push given color to the device.'''
    self.colorData[0] = aColor >> 8
    self.colorData[1] = aColor
    self._writedata(self.colorData)

  @micropython.native
  def _setMADCTL( self ) :
    '''Set screen rotation and RGB/BGR format.'''
    self._writecommand(_MADCTL)
    rgb = _TFTRGB if self._rgb else _TFTBGR
    self._writedata(tft._TFTRotations[self.rotate] | rgb)

  @micropython.native
  def _reset( self ) :
    '''Reset the device.'''
    self.dc.low()
    self.reset.high()
    pyb.delay(500)
    self.reset.low()
    pyb.delay(500)
    self.reset.high()
    pyb.delay(500)

#  def initb( self ) :
#    '''Initialize blue tab version.'''
#    self._size = (ScreenSize[0] + 2, ScreenSize[1] + 1)
#    self._reset()
#    self._writecommand(_SWRESET)              #Software reset.
#    pyb.delay(50)
#    self._writecommand(_SLPOUT)               #out of sleep mode.
#    pyb.delay(500)
#
#    data1 = bytearray(1)
#    self._writecommand(_COLMOD)               #Set color mode.
#    data1[0] = 0x05                             #16 bit color.
#    self._writedata(data1)
#    pyb.delay(10)
#
#    data3 = bytearray([0x00, 0x06, 0x03])       #fastest refresh, 6 lines front, 3 lines back.
#    self._writecommand(_FRMCTR1)              #Frame rate control.
#    self._writedata(data3)
#    pyb.delay(10)
#
#    self._writecommand(_MADCTL)
#    data1[0] = 0x08                             #row address/col address, bottom to top refresh
#    self._writedata(data1)
#
#    data2 = bytearray(2)
#    self._writecommand(_DISSET5)              #Display settings
#    data2[0] = 0x15                             #1 clock cycle nonoverlap, 2 cycle gate rise, 3 cycle oscil, equalize
#    data2[1] = 0x02                             #fix on VTL
#    self._writedata(data2)
#
#    self._writecommand(_INVCTR)               #Display inversion control
#    data1[0] = 0x00                             #Line inversion.
#    self._writedata(data1)
#
#    self._writecommand(_PWCTR1)               #Power control
#    data2[0] = 0x02   #GVDD = 4.7V
#    data2[1] = 0x70   #1.0uA
#    self._writedata(data2)
#    pyb.delay(10)
#
#    self._writecommand(_PWCTR2)               #Power control
#    data1[0] = 0x05                             #VGH = 14.7V, VGL = -7.35V
#    self._writedata(data1)
#
#    self._writecommand(_PWCTR3)           #Power control
#    data2[0] = 0x01   #Opamp current small
#    data2[1] = 0x02   #Boost frequency
#    self._writedata(data2)
#
#    self._writecommand(_VMCTR1)               #Power control
#    data2[0] = 0x3C   #VCOMH = 4V
#    data2[1] = 0x38   #VCOML = -1.1V
#    self._writedata(data2)
#    pyb.delay(10)
#
#    self._writecommand(_PWCTR6)               #Power control
#    data2[0] = 0x11
#    data2[1] = 0x15
#    self._writedata(data2)
#
#    #These different values don't seem to make a difference.
##     dataGMCTRP = bytearray([0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22, 0x1f,
##                             0x1b, 0x23, 0x37, 0x00, 0x07, 0x02, 0x10])
#    dataGMCTRP = bytearray([0x02, 0x1c, 0x07, 0x12, 0x37, 0x32, 0x29, 0x2d, 0x29,
#                            0x25, 0x2b, 0x39, 0x00, 0x01, 0x03, 0x10])
#    self._writecommand(_GMCTRP1)
#    self._writedata(dataGMCTRP)
#
##     dataGMCTRN = bytearray([0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e, 0x30,
##                             0x30, 0x39, 0x3f, 0x00, 0x07, 0x03, 0x10])
#    dataGMCTRN = bytearray([0x03, 0x1d, 0x07, 0x06, 0x2e, 0x2c, 0x29, 0x2d, 0x2e,
#                            0x2e, 0x37, 0x3f, 0x00, 0x00, 0x02, 0x10])
#    self._writecommand(_GMCTRN1)
#    self._writedata(dataGMCTRN)
#    pyb.delay(10)
#
#    self._writecommand(_CASET)                #Column address set.
#    self.windowLocData[0] = 0x00
#    self.windowLocData[1] = 2                   #Start at column 2
#    self.windowLocData[2] = 0x00
#    self.windowLocData[3] = self._size[0] - 1
#    self._writedata(self.windowLocData)
#
#    self._writecommand(_RASET)                #Row address set.
#    self.windowLocData[1] = 1                   #Start at row 2.
#    self.windowLocData[3] = self._size[1] - 1
#    self._writedata(self.windowLocData)
#
#    self._writecommand(_NORON)                #Normal display on.
#    pyb.delay(10)
#
#    self._writecommand(_RAMWR)
#    pyb.delay(500)
#
#    self._writecommand(_DISPON)
#    self.cs.high()
#    pyb.delay(500)
#
#  def initr( self ) :
#    '''Initialize a red tab version.'''
#    self._reset()
#
#    self._writecommand(_SWRESET)              #Software reset.
#    pyb.delay(150)
#    self._writecommand(_SLPOUT)               #out of sleep mode.
#    pyb.delay(500)
#
#    data3 = bytearray([0x01, 0x2C, 0x2D])       #fastest refresh, 6 lines front, 3 lines back.
#    self._writecommand(_FRMCTR1)              #Frame rate control.
#    self._writedata(data3)
#
#    self._writecommand(_FRMCTR2)              #Frame rate control.
#    self._writedata(data3)
#
#    data6 = bytearray([0x01, 0x2c, 0x2d, 0x01, 0x2c, 0x2d])
#    self._writecommand(_FRMCTR3)              #Frame rate control.
#    self._writedata(data6)
#    pyb.delay(10)
#
#    data1 = bytearray(1)
#    self._writecommand(_INVCTR)               #Display inversion control
#    data1[0] = 0x07                             #Line inversion.
#    self._writedata(data1)
#
#    self._writecommand(_PWCTR1)               #Power control
#    data3[0] = 0xA2
#    data3[1] = 0x02
#    data3[2] = 0x84
#    self._writedata(data3)
#
#    self._writecommand(_PWCTR2)               #Power control
#    data1[0] = 0xC5   #VGH = 14.7V, VGL = -7.35V
#    self._writedata(data1)
#
#    data2 = bytearray(2)
#    self._writecommand(_PWCTR3)               #Power control
#    data2[0] = 0x0A   #Opamp current small
#    data2[1] = 0x00   #Boost frequency
#    self._writedata(data2)
#
#    self._writecommand(_PWCTR4)               #Power control
#    data2[0] = 0x8A   #Opamp current small
#    data2[1] = 0x2A   #Boost frequency
#    self._writedata(data2)
#
#    self._writecommand(_PWCTR5)               #Power control
#    data2[0] = 0x8A   #Opamp current small
#    data2[1] = 0xEE   #Boost frequency
#    self._writedata(data2)
#
#    self._writecommand(_VMCTR1)               #Power control
#    data1[0] = 0x0E
#    self._writedata(data1)
#
#    self._writecommand(_INVOFF)
#
#    self._writecommand(_MADCTL)               #Power control
#    data1[0] = 0xC8
#    self._writedata(data1)
#
#    self._writecommand(_COLMOD)
#    data1[0] = 0x05
#    self._writedata(data1)
#
#    self._writecommand(_CASET)                #Column address set.
#    self.windowLocData[0] = 0x00
#    self.windowLocData[1] = 0x00
#    self.windowLocData[2] = 0x00
#    self.windowLocData[3] = self._size[0] - 1
#    self._writedata(self.windowLocData)
#
#    self._writecommand(_RASET)                #Row address set.
#    self.windowLocData[3] = self._size[1] - 1
#    self._writedata(self.windowLocData)
#
#    dataGMCTRP = bytearray([0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22, 0x1f,
#                            0x1b, 0x23, 0x37, 0x00, 0x07, 0x02, 0x10])
#    self._writecommand(_GMCTRP1)
#    self._writedata(dataGMCTRP)
#
#    dataGMCTRN = bytearray([0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e, 0x30,
#                            0x30, 0x39, 0x3f, 0x00, 0x07, 0x03, 0x10])
#    self._writecommand(_GMCTRN1)
#    self._writedata(dataGMCTRN)
#    pyb.delay(10)
#
#    self._writecommand(_DISPON)
#    pyb.delay(100)
#
#    self._writecommand(_NORON)                #Normal display on.
#    pyb.delay(10)
#
#    self.cs.high()

  @micropython.native
  def initg( self ) :
    '''Initialize a green tab version.'''
    self._reset()

    self._writecommand(_SWRESET)              #Software reset.
    pyb.delay(150)
    self._writecommand(_SLPOUT)               #out of sleep mode.
    pyb.delay(255)

    data3 = bytearray([0x01, 0x2C, 0x2D])       #fastest refresh, 6 lines front, 3 lines back.
    self._writecommand(_FRMCTR1)              #Frame rate control.
    self._writedata(data3)

    self._writecommand(_FRMCTR2)              #Frame rate control.
    self._writedata(data3)

    data6 = bytearray([0x01, 0x2c, 0x2d, 0x01, 0x2c, 0x2d])
    self._writecommand(_FRMCTR3)              #Frame rate control.
    self._writedata(data6)
    pyb.delay(10)

    self._writecommand(_INVCTR)               #Display inversion control
    self._writedata(0x07)

    self._writecommand(_PWCTR1)               #Power control
    data3[0] = 0xA2
    data3[1] = 0x02
    data3[2] = 0x84
    self._writedata(data3)

    self._writecommand(_PWCTR2)               #Power control
    self._writedata(0xC5)

    data2 = bytearray(2)
    self._writecommand(_PWCTR3)               #Power control
    data2[0] = 0x0A   #Opamp current small
    data2[1] = 0x00   #Boost frequency
    self._writedata(data2)

    self._writecommand(_PWCTR4)               #Power control
    data2[0] = 0x8A   #Opamp current small
    data2[1] = 0x2A   #Boost frequency
    self._writedata(data2)

    self._writecommand(_PWCTR5)               #Power control
    data2[0] = 0x8A   #Opamp current small
    data2[1] = 0xEE   #Boost frequency
    self._writedata(data2)

    self._writecommand(_VMCTR1)               #Power control
    self._writedata(0x0E)

    self._writecommand(_INVOFF)

    self._setMADCTL()

    self._writecommand(_COLMOD)
    self._writedata(0x05)

    self._writecommand(_CASET)                #Column address set.
    self.windowLocData[0] = 0x00
    self.windowLocData[1] = 0x01                #Start at row/column 1.
    self.windowLocData[2] = 0x00
    self.windowLocData[3] = self._size[0] - 1
    self._writedata(self.windowLocData)

    self._writecommand(_RASET)                #Row address set.
    self.windowLocData[3] = self._size[1] - 1
    self._writedata(self.windowLocData)

    dataGMCTRP = bytearray([0x02, 0x1c, 0x07, 0x12, 0x37, 0x32, 0x29, 0x2d, 0x29,
                            0x25, 0x2b, 0x39, 0x00, 0x01, 0x03, 0x10])
    self._writecommand(_GMCTRP1)
    self._writedata(dataGMCTRP)

    dataGMCTRN = bytearray([0x03, 0x1d, 0x07, 0x06, 0x2e, 0x2c, 0x29, 0x2d, 0x2e,
                            0x2e, 0x37, 0x3f, 0x00, 0x00, 0x02, 0x10])
    self._writecommand(_GMCTRN1)
    self._writedata(dataGMCTRN)

    self._writecommand(_NORON)                #Normal display on.
    pyb.delay(10)

    self._writecommand(_DISPON)
    pyb.delay(100)

    self.cs.high()

#def maker(  ) :
#  t = tft(1, "X1", "X2")
#  print("Initializing")
#  t.initr()
#  t.fill(0)
#  return t
#
#def makeb(  ) :
#  t = tft(1, "X1", "X2")
#  print("Initializing")
#  t.initb()
#  t.fill(0)
#  return t
#
#def makeg(  ) :
#  t = tft(1, "X1", "X2")
#  print("Initializing")
#  t.initg()
##  t.fill(0)
#  return t