Some more clean up etc

HAL/EXTI/EXTI.c

@@ -1,11 +1,8 @@
+#include "stm32f4xx_exti.h"
 #include "EXTI.h"
-#include "stm32f4xx_conf.h"
-
 
 
 /* Private function prototypes -----------------------------------------------*/
-static void Exti_RFM22B_RecvPacket(void);
-
 
 
 void Exti_Init0(uint8_t preemp_prio, uint8_t sub_prio)
@@ -15,64 +12,45 @@ void Exti_Init0(uint8_t preemp_prio, uint8_t sub_prio)
 	(void)sub_prio;
 }
 
+
 void Exti_Init1(uint8_t preemp_prio, uint8_t sub_prio)
 {
 	(void)preemp_prio;
 	(void)sub_prio;
 }
 
+
 void Exti_Init2(uint8_t preemp_prio, uint8_t sub_prio)
 {
 	(void)preemp_prio;
 	(void)sub_prio;
 }
 
+
 void Exti_Init3(uint8_t preemp_prio, uint8_t sub_prio)
 {
 	(void)preemp_prio;
 	(void)sub_prio;
 }
 
+
 void Exti_Init4(uint8_t preemp_prio, uint8_t sub_prio)
 {
 	(void)preemp_prio;
 	(void)sub_prio;
 }
 
+
 // External interrupt for line 5 to 9
 void Exti_Init9_5(uint8_t preemp_prio, uint8_t sub_prio)
 {
-	NVIC_InitTypeDef NVIC_InitStructure;
+	(void)preemp_prio;
-
+	(void)sub_prio;
-	// Enable and set EXTI9_5 Interrupt
-	NVIC_InitStructure.NVIC_IRQChannel = EXTI9_5_IRQn;
-	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = preemp_prio;
-	NVIC_InitStructure.NVIC_IRQChannelSubPriority = sub_prio;
-	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
-	NVIC_Init(&NVIC_InitStructure);
-
-	Exti_RFM22B_RecvPacket();
 }
 
+
 void Exti_Init15_10(uint8_t preemp_prio, uint8_t sub_prio)
 {
 	(void)preemp_prio;
 	(void)sub_prio;
 }
-
-//-------------------------------------------------------------------------------------------------//
-
-static void Exti_RFM22B_RecvPacket(void)
-{
-	EXTI_InitTypeDef   EXTI_InitStructure;
-
-	// Connect EXTI8 Line to PC8 pin
-	SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOC, GPIO_PinSource8);
-
-	// Configure EXTI8 line
-	EXTI_InitStructure.EXTI_Line = EXTI_Line8;
-	EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
-	EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;
-	EXTI_InitStructure.EXTI_LineCmd = ENABLE;
-	EXTI_Init(&EXTI_InitStructure);
-}

HAL/SPI/SPI.c

@@ -142,11 +142,13 @@ void Spi_Init(SPI_TypeDef *SPIx, SPI_Mode mode)
 	SPI_Cmd(SPIx, ENABLE);
 }
 
+
 uint8_t Spi_ReadByte(SPI_TypeDef *SPIx)
 {
 	return Spi_WriteByte(SPIx, 0xFF);
 }
 
+
 uint8_t Spi_WriteByte(SPI_TypeDef *SPIx, uint8_t _data)
 {
 	// Loop while DR register is not empty

HAL/STM32/stm32f4xx_it.c

@@ -242,9 +242,25 @@ void EXTI9_5_IRQHandler(void)
 void USART1_IRQHandler(void)
 {
 	if(USART_GetITStatus(USART1, USART_IT_RXNE) != RESET) {
+		/* Read one byte from the receive data register */
+		unsigned char c = (USART_ReceiveData(USART1) & 0xFF);
+
+		// Write character to buffer
+		FifoUsart_Insert(USART1_NUM, USART_DIR_RX, c);
 	}
 
 	if(USART_GetITStatus(USART1, USART_IT_TXE) != RESET) {
+		char c;
+
+		if(FifoUsart_Get(USART1_NUM, USART_DIR_TX, &c) == 0) {
+			/* Write one byte to the transmit data register */
+			while(USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET);
+			USART_SendData(USART1, c);
+		}
+		else {
+			// Nothing to transmit - disable interrupt
+			USART_ITConfig(USART1, USART_IT_TXE, DISABLE);
+		}
 	}
 
 	/* If overrun condition occurs, clear the ORE flag and recover communication */

HAL/TIM/TIM.c

@@ -31,6 +31,11 @@ void TIM_Init(void)
 }
 
 
+/**
+ * Timer 1
+ * Outputs ~10 KHz on D11
+ * Used for Variable Spindle PWM
+ **/
 void Timer1_Init(void)
 {
 	TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
@@ -64,6 +69,14 @@ void Timer1_Init(void)
 	TIM_CtrlPWMOutputs(TIM1, ENABLE);
 }
 
+
+/**
+ * Timer 9
+ * Base clock: 20 MHz
+ * Used for Stepper Interrupt
+ * On CC1, Main Stepper Interuppt is called
+ * On Update, Stepper Port Reset is called
+ **/
 void Timer9_Init(void)
 {
 	NVIC_InitTypeDef NVIC_InitStructure;