mirror
/
ESP32-CAM-Video-Recorder-junior
kopia lustrzana https://github.com/jameszah/ESP32-CAM-Video-Recorder-junior
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
ESP32-CAM-Video-Recorder-ju.../old/ESP32-CAM-Video-Recorder-ju...

1533 wiersze
48 KiB
C++
Czysty Wina Historia

/*
ESP32-CAM-Video-Recorder-junior
This program records an mjpeg avi video to the sd card of an ESP32-CAM.
It is the junior version of https://github.com/jameszah/ESP32-CAM-Video-Recorder
which has 100 other features of wifi, streaming video, http control, telegram updates, pir control,
touch control, ftp downloads, .... and other things that make it very big and complex.
This one is written in simple arduino code without any semaphores, tasks, priorities, RTOS stuff ....
Just set a few parameters, compile and download, and it will record on power-on, until sd is full, or power-off.
Then pull out the sd and move it to your computer, and you will see all but the last file avi which died during the unplug.
Compile Time Parameters
1. framesize 10,9,7,6,5 for 10 - UXGA (1600x1200 @ 6 fps),
9 - SXGA (1280x1024 @ 6 fps),
7 - SVGA(800x600 @ 24 fps),
6 - VGA(640x480 @ 24 fps),
5 - CIF(400x296 @ 50 fps)
2. quality - 1 to 63 - 10 is a good start, increase to 20 to get more frames per second - must be higher than jpeg_quality below
3. avi_length - seconds for each avi - it closes files, and starts another file after this time - like 60 or 1800
4. devname - a text name for your camera when the files are on your computer
5. If you want internet, set #define IncludeInternet to 1, and put in your ssid and password
If you hold down gpio 12 - the files will be closed, and recording stopped. Web interface still running.
If you hold down gpio 13 during a movie start - it will record at UXGA 6 fps, rather than SVGA 25 fps.
Note that framesize and high quality will produce lots of bytes which have to written to the sd. Those frame rates above are
for the OV2640 camera, and your sd card will have to be able to swallow all that data before the next frame. If the
sd card cannot take all that data, then the camera will be idle waiting for the sd. Lower the framesize (UXGA -> SVGA),
and lower the quality (10 -> 15 -> 20, higher number is lower quality) to improve framerate to the camera limits.
If you have a fast enough sd card, it will record at the full speed of the camera.
You can look at the blinking red led on the back of the chip to see the recording rate -- sd chips for video are made to be more predictable.
The files will have the name such as:
desklens10.003.avi
"desklens" is your devname
10 - is a number stored in eprom that will increase everytime your device boots
3 - is the 3rd file created during the current boot
Small red led on the back blinks with every frame.
by James Zahary Sep 12, 2020
jamzah.plc@gmail.com
- v09 Sep 24, 2020
- v10 Sep 28, 2020
- v10x.wifiman Jan 4, 2021
-- uses WiFiManger to set ssid and password
- you have to reboot your esp32 after succesfully setting the password !!
https://github.com/jameszah/ESP32-CAM-Video-Recorder-junior
https://github.com/jameszah/ESP32-CAM-Video-Recorder
jameszah/ESP32-CAM-Video-Recorder is licensed under the
GNU General Public License v3.0
jameszah/ESP32-CAM-Video-Recorder-junior is licensed under the
GNU General Public License v3.0
The is Arduino code, with standard setup for ESP32-CAM
- Board ESP32 Wrover Module
- Partition Scheme Huge APP (3MB No OTA)
Compiled with Arduino 1.8.12, which used these libraries:
Jan 4, 2021 - several new libraries with the WiFiManager version
- note the WiFiManager version which is the latest development version as of Jan 4, 2021
Using library SD_MMC at version 1.0 in folder: C:\Users\James\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.4\libraries\SD_MMC
Using library FS at version 1.0 in folder: C:\Users\James\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.4\libraries\FS
Using library EEPROM at version 1.0.3 in folder: C:\Users\James\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.4\libraries\EEPROM
Using library WiFi at version 1.0 in folder: C:\Users\James\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.4\libraries\WiFi
Using library WiFiManager at version 2.0.3-alpha in folder: C:\Users\James\Documents\Arduino\libraries\WiFiManager
Using library WebServer at version 1.0 in folder: C:\Users\James\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.4\libraries\WebServer
Using library DNSServer at version 1.1.0 in folder: C:\Users\James\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.4\libraries\DNSServer
Using library ESPmDNS at version 1.0 in folder: C:\Users\James\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.4\libraries\ESPmDNS
Using library HTTPClient at version 1.2 in folder: C:\Users\James\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.4\libraries\HTTPClient
Using library WiFiClientSecure at version 1.0 in folder: C:\Users\James\AppData\Local\Arduino15\packages\esp32\hardware\esp32\1.0.4\libraries\WiFiClientSecure
*/
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// user edits here:
static const char vernum[] = "v10x-wifiman";
static const char devname[] = "desklens"; // name of your camera for mDNS, Router, and filenames
#define IncludeInternet 1 // if you want internet/wifi, change the to 1, and put in your wifi name/pass
bool InternetFailed = false;
const char* ssid = "jzjzjz"; // but with WiFiManager, you set it from your phone, not in here!
const char* password = "jzjzjz";
// https://sites.google.com/a/usapiens.com/opnode/time-zones -- find your timezone here
#define TIMEZONE "GMT0BST,M3.5.0/01,M10.5.0/02" // your timezone - this is GMT
// two configurations
// c1 is config if you have nothing on pin 13
// c2 will be used if you ground pin 13, through a 10k resistor
// c1 = svga, quality 10, 30 minutes
// c2 = uxga, quality 10, 30 minutes
int c1_framesize = 7; // 10 UXGA, 9 SXGA, 7 SVGA, 6 VGA, 5 CIF
int c1_quality = 10; // quality on the 1..63 scale - lower is better quality and bigger files - must be higher than the jpeg_quality in camera_config
int c1_avi_length = 1800; // how long a movie in seconds -- 1800 sec = 30 min
int c2_framesize = 10;
int c2_quality = 10;
int c2_avi_length = 1800;
int c1_or_c2 = 1;
int framesize = c1_framesize;
int quality = c1_quality;
int avi_length = c1_avi_length;
int MagicNumber = 12; // change this number to reset the eprom in your esp32 for file numbers
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
float most_recent_fps = 0;
int most_recent_avg_framesize = 0;
uint8_t* framebuffer;
int framebuffer_len;
uint8_t framebuffer_static[64 * 1024 + 20];
int framebuffer_len_static;
//#define LOG_LOCAL_LEVEL ESP_LOG_VERBOSE
#include "esp_log.h"
#include "esp_http_server.h"
#include "esp_camera.h"
// CAMERA_MODEL_AI_THINKER
#define PWDN_GPIO_NUM 32
#define RESET_GPIO_NUM -1
#define XCLK_GPIO_NUM 0
#define SIOD_GPIO_NUM 26
#define SIOC_GPIO_NUM 27
#define Y9_GPIO_NUM 35
#define Y8_GPIO_NUM 34
#define Y7_GPIO_NUM 39
#define Y6_GPIO_NUM 36
#define Y5_GPIO_NUM 21
#define Y4_GPIO_NUM 19
#define Y3_GPIO_NUM 18
#define Y2_GPIO_NUM 5
#define VSYNC_GPIO_NUM 25
#define HREF_GPIO_NUM 23
#define PCLK_GPIO_NUM 22
camera_fb_t * fb_curr = NULL;
camera_fb_t * fb_next = NULL;
#include <stdio.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_system.h"
#include "nvs_flash.h"
#include "nvs.h"
#include "soc/soc.h"
#include "soc/cpu.h"
#include "soc/rtc_cntl_reg.h"
static esp_err_t cam_err;
int first = 1;
//int frame_cnt = 0;
long frame_start = 0;
long frame_end = 0;
long frame_total = 0;
long frame_average = 0;
long loop_average = 0;
long loop_total = 0;
long total_frame_data = 0;
long last_frame_length = 0;
int done = 0;
long avi_start_time = 0;
long avi_end_time = 0;
int stop = 0;
int stop_2nd_opinion = -2;
int stop_1st_opinion = -1;
int we_are_already_stopped = 0;
long total_delay = 0;
long bytes_before_last_100_frames = 0;
long time_before_last_100_frames = 0;
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Avi Writer Stuff here
// MicroSD
#include "driver/sdmmc_host.h"
#include "driver/sdmmc_defs.h"
#include "sdmmc_cmd.h"
#include "esp_vfs_fat.h"
#include <SD_MMC.h>
FILE *avifile = NULL;
FILE *idxfile = NULL;
long bp;
long ap;
long bw;
long aw;
int diskspeed = 0;
char fname[100];
static int i = 0;
uint8_t temp = 0, temp_last = 0;
unsigned long fileposition = 0;
uint16_t frame_cnt = 0;
uint16_t remnant = 0;
uint32_t length = 0;
uint32_t startms;
uint32_t elapsedms;
uint32_t uVideoLen = 0;
bool is_header = false;
int bad_jpg = 0;
int extend_jpg = 0;
int normal_jpg = 0;
int file_number = 0;
int file_group = 0;
long boot_time = 0;
long totalp;
long totalw;
float avgp;
float avgw;
#define BUFFSIZE 512
uint8_t buf[BUFFSIZE];
#define AVIOFFSET 240 // AVI main header length
unsigned long movi_size = 0;
unsigned long jpeg_size = 0;
unsigned long idx_offset = 0;
uint8_t zero_buf[4] = {0x00, 0x00, 0x00, 0x00};
uint8_t dc_buf[4] = {0x30, 0x30, 0x64, 0x63}; // "00dc"
uint8_t dc_and_zero_buf[8] = {0x30, 0x30, 0x64, 0x63, 0x00, 0x00, 0x00, 0x00};
uint8_t avi1_buf[4] = {0x41, 0x56, 0x49, 0x31}; // "AVI1"
uint8_t idx1_buf[4] = {0x69, 0x64, 0x78, 0x31}; // "idx1"
uint8_t vga_w[2] = {0x80, 0x02}; // 640
uint8_t vga_h[2] = {0xE0, 0x01}; // 480
uint8_t cif_w[2] = {0x90, 0x01}; // 400
uint8_t cif_h[2] = {0x28, 0x01}; // 296
uint8_t svga_w[2] = {0x20, 0x03}; // 800
uint8_t svga_h[2] = {0x58, 0x02}; // 600
uint8_t sxga_w[2] = {0x00, 0x05}; // 1280
uint8_t sxga_h[2] = {0x00, 0x04}; // 1024
uint8_t uxga_w[2] = {0x40, 0x06}; // 1600
uint8_t uxga_h[2] = {0xB0, 0x04}; // 1200
const int avi_header[AVIOFFSET] PROGMEM = {
0x52, 0x49, 0x46, 0x46, 0xD8, 0x01, 0x0E, 0x00, 0x41, 0x56, 0x49, 0x20, 0x4C, 0x49, 0x53, 0x54,
0xD0, 0x00, 0x00, 0x00, 0x68, 0x64, 0x72, 0x6C, 0x61, 0x76, 0x69, 0x68, 0x38, 0x00, 0x00, 0x00,
0xA0, 0x86, 0x01, 0x00, 0x80, 0x66, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00,
0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x80, 0x02, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4C, 0x49, 0x53, 0x54, 0x84, 0x00, 0x00, 0x00,
0x73, 0x74, 0x72, 0x6C, 0x73, 0x74, 0x72, 0x68, 0x30, 0x00, 0x00, 0x00, 0x76, 0x69, 0x64, 0x73,
0x4D, 0x4A, 0x50, 0x47, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0A, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x73, 0x74, 0x72, 0x66,
0x28, 0x00, 0x00, 0x00, 0x28, 0x00, 0x00, 0x00, 0x80, 0x02, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00,
0x01, 0x00, 0x18, 0x00, 0x4D, 0x4A, 0x50, 0x47, 0x00, 0x84, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x49, 0x4E, 0x46, 0x4F,
0x10, 0x00, 0x00, 0x00, 0x6A, 0x61, 0x6D, 0x65, 0x73, 0x7A, 0x61, 0x68, 0x61, 0x72, 0x79, 0x20,
0x76, 0x31, 0x30, 0x20, 0x4C, 0x49, 0x53, 0x54, 0x00, 0x01, 0x0E, 0x00, 0x6D, 0x6F, 0x76, 0x69,
};
//
// Writes an uint32_t in Big Endian at current file position
//
static void inline print_quartet(unsigned long i, FILE * fd)
{
uint8_t y[4];
y[0] = i % 0x100;
y[1] = (i >> 8) % 0x100;
y[2] = (i >> 16) % 0x100;
y[3] = (i >> 24) % 0x100;
size_t i1_err = fwrite(y , 1, 4, fd);
}
//
// Writes 2 uint32_t in Big Endian at current file position
//
static void inline print_2quartet(unsigned long i, unsigned long j, FILE * fd)
{
uint8_t y[8];
y[0] = i % 0x100;
y[1] = (i >> 8) % 0x100;
y[2] = (i >> 16) % 0x100;
y[3] = (i >> 24) % 0x100;
y[4] = j % 0x100;
y[5] = (j >> 8) % 0x100;
y[6] = (j >> 16) % 0x100;
y[7] = (j >> 24) % 0x100;
size_t i1_err = fwrite(y , 1, 8, fd);
}
//
// if we have no camera, or sd card, then flash rear led on and off to warn the human SOS - SOS
//
void major_fail() {
Serial.println(" ");
for (int i = 0; i < 10; i++) { // 10 loops or about 100 seconds then reboot
for (int j = 0; j < 3; j++) {
digitalWrite(33, LOW); delay(150);
digitalWrite(33, HIGH); delay(150);
}
delay(1000);
for (int j = 0; j < 3; j++) {
digitalWrite(33, LOW); delay(500);
digitalWrite(33, HIGH); delay(500);
}
delay(1000);
Serial.print("Major Fail "); Serial.print(i); Serial.print(" / "); Serial.println(10);
}
ESP.restart();
}
static esp_err_t config_camera() {
camera_config_t config;
//Serial.println("config camera");
config.ledc_channel = LEDC_CHANNEL_0;
config.ledc_timer = LEDC_TIMER_0;
config.pin_d0 = Y2_GPIO_NUM;
config.pin_d1 = Y3_GPIO_NUM;
config.pin_d2 = Y4_GPIO_NUM;
config.pin_d3 = Y5_GPIO_NUM;
config.pin_d4 = Y6_GPIO_NUM;
config.pin_d5 = Y7_GPIO_NUM;
config.pin_d6 = Y8_GPIO_NUM;
config.pin_d7 = Y9_GPIO_NUM;
config.pin_xclk = XCLK_GPIO_NUM;
config.pin_pclk = PCLK_GPIO_NUM;
config.pin_vsync = VSYNC_GPIO_NUM;
config.pin_href = HREF_GPIO_NUM;
config.pin_sscb_sda = SIOD_GPIO_NUM;
config.pin_sscb_scl = SIOC_GPIO_NUM;
config.pin_pwdn = PWDN_GPIO_NUM;
config.pin_reset = RESET_GPIO_NUM;
config.xclk_freq_hz = 10000000; // 10000000 or 20000000 -- 10 is faster !!
config.pixel_format = PIXFORMAT_JPEG;
//config.frame_size = FRAMESIZE_UXGA; // edit in framesizes below -- this must be better than the framesize specified at the top
/*
FRAMESIZE_96X96, // 96x96
FRAMESIZE_QQVGA, // 160x120
FRAMESIZE_QCIF, // 176x144
FRAMESIZE_HQVGA, // 240x176
FRAMESIZE_240X240, // 240x240
FRAMESIZE_QVGA, // 320x240
FRAMESIZE_CIF, // 400x296 5
FRAMESIZE_HVGA, // 480x320
FRAMESIZE_VGA, // 640x480 6
FRAMESIZE_SVGA, // 800x600 7
FRAMESIZE_XGA, // 1024x768
FRAMESIZE_HD, // 1280x720
FRAMESIZE_SXGA, // 1280x1024 9
FRAMESIZE_UXGA, // 1600x1200 10
*/
config.frame_size = FRAMESIZE_UXGA; // edit in framesizes below
config.jpeg_quality = 6; // 1 to 63 - smaller number is higher quality and more data - must be lower rhat the quality parameter at the top
config.fb_count = 7;
//Serial.printf("Before camera config ...");
//Serial.printf("Internal Total heap %d, internal Free Heap %d\n\n", ESP.getHeapSize(), ESP.getFreeHeap());
esp_err_t cam_err = ESP_FAIL;
int attempt = 2;
while (attempt && cam_err != ESP_OK) {
cam_err = esp_camera_init(&config);
if (cam_err != ESP_OK) {
Serial.printf("Camera init failed with error 0x%x", cam_err);
digitalWrite(PWDN_GPIO_NUM, 1);
delay(100);
digitalWrite(PWDN_GPIO_NUM, 0); // power cycle the camera (OV2640)
attempt--;
}
}
if (cam_err != ESP_OK) {
major_fail();
}
//Serial.printf("After camera config ...");
//Serial.printf("Internal Total heap %d, internal Free Heap %d\n\n", ESP.getHeapSize(), ESP.getFreeHeap());
sensor_t * ss = esp_camera_sensor_get();
///ss->set_vflip(ss, 1); // 0 = disable , 1 = enable
///ss->set_hmirror(ss, 0); // 0 = disable , 1 = enable
Serial.printf("\nCamera started correctly, Type is %x (hex) of 9650, 7725, 2640, 3660, 5640\n\n", ss->id.PID);
ss->set_quality(ss, quality);
ss->set_framesize(ss, (framesize_t)framesize);
ss->set_brightness(ss, 1); //up the blightness just a bit
ss->set_saturation(ss, -2); //lower the saturation
delay(800);
for (int j = 0; j < 4; j++) {
camera_fb_t * fb = esp_camera_fb_get();
//Serial.print("Pic, len="); Serial.println(fb->len);
esp_camera_fb_return(fb);
delay(50);
}
}
static esp_err_t init_sdcard()
{
pinMode(13, PULLUP);
esp_err_t ret = ESP_FAIL;
sdmmc_host_t host = SDMMC_HOST_DEFAULT();
host.flags = SDMMC_HOST_FLAG_1BIT; // using 1 bit mode
host.max_freq_khz = SDMMC_FREQ_HIGHSPEED;
diskspeed = host.max_freq_khz;
sdmmc_slot_config_t slot_config = SDMMC_SLOT_CONFIG_DEFAULT();
slot_config.width = 1; // using 1 bit mode
esp_vfs_fat_sdmmc_mount_config_t mount_config = {
.format_if_mount_failed = false,
.max_files = 8,
};
sdmmc_card_t *card;
ret = esp_vfs_fat_sdmmc_mount("/sdcard", &host, &slot_config, &mount_config, &card);
if (ret == ESP_OK) {
Serial.println("SD card mount successfully!");
} else {
Serial.printf("Failed to mount SD card VFAT filesystem. Error: %s\n\n", esp_err_to_name(ret));
Serial.println("Do you have an SD Card installed?");
Serial.println("Check pin 12 and 13, not grounded, or grounded with 10k resistors!\n");
major_fail();
}
sdmmc_card_print_info(stdout, card);
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// get_good_jpeg() - take a picture and make sure it has a good jpeg
//
camera_fb_t * get_good_jpeg() {
camera_fb_t * fb;
do {
bp = millis();
fb = esp_camera_fb_get();
totalp = totalp + millis() - bp;
int x = fb->len;
int foundffd9 = 0;
for (int j = 1; j <= 1025; j++) {
if (fb->buf[x - j] != 0xD9) {
// no d9, try next for
} else {
//Serial.println("Found a D9");
if (fb->buf[x - j - 1] == 0xFF ) {
//Serial.print("Found the FFD9, junk is "); Serial.println(j);
if (j == 1) {
normal_jpg++;
} else {
extend_jpg++;
}
if (j > 1000) { // never happens. but > 1 does, usually 400-500
Serial.print("Frame "); Serial.print(frame_cnt);
Serial.print(", Len = "); Serial.print(x);
Serial.print(", Correct Len = "); Serial.print(x - j + 1);
Serial.print(", Extra Bytes = "); Serial.println( j - 1);
}
foundffd9 = 1;
break;
}
}
}
if (!foundffd9) {
bad_jpg++;
Serial.print("Bad jpeg, Len = "); Serial.println(x);
esp_camera_fb_return(fb);
} else {
break;
// count up the useless bytes
}
} while (1);
return fb;
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// eprom functions - increment the file_group, so files are always unique
//
#include <EEPROM.h>
struct eprom_data {
int eprom_good;
int file_group;
};
void do_eprom_read() {
eprom_data ed;
EEPROM.begin(200);
EEPROM.get(0, ed);
if (ed.eprom_good == MagicNumber) {
Serial.println("Good settings in the EPROM ");
file_group = ed.file_group;
file_group++;
Serial.print("New File Group "); Serial.println(file_group );
} else {
Serial.println("No settings in EPROM - Starting with File Group 1 ");
file_group = 1;
}
do_eprom_write();
file_number = 1;
}
void do_eprom_write() {
eprom_data ed;
ed.eprom_good = MagicNumber;
ed.file_group = file_group;
Serial.println("Writing to EPROM ...");
EEPROM.begin(200);
EEPROM.put(0, ed);
EEPROM.commit();
EEPROM.end();
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// Make the avi functions
//
// start_avi() - open the file and write headers
// another_pic_avi() - write one more frame of movie
// end_avi() - write the final parameters and close the file
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// start_avi - open the files and write in headers
//
static esp_err_t start_avi() {
Serial.println("Starting an avi ");
sprintf(fname, "/sdcard/%s%d.%03d.avi", devname, file_group, file_number);
file_number++;
avifile = fopen(fname, "w");
idxfile = fopen("/sdcard/idx.tmp", "w");
if (avifile != NULL) {
Serial.printf("File open: %s\n", fname);
} else {
Serial.println("Could not open file");
major_fail();
}
if (idxfile != NULL) {
Serial.printf("File open: %s\n", "/sdcard/idx.tmp");
} else {
Serial.println("Could not open file");
major_fail();
}
for ( i = 0; i < AVIOFFSET; i++)
{
char ch = pgm_read_byte(&avi_header[i]);
buf[i] = ch;
}
size_t err = fwrite(buf, 1, AVIOFFSET, avifile);
if (framesize == 6) {
fseek(avifile, 0x40, SEEK_SET);
err = fwrite(vga_w, 1, 2, avifile);
fseek(avifile, 0xA8, SEEK_SET);
err = fwrite(vga_w, 1, 2, avifile);
fseek(avifile, 0x44, SEEK_SET);
err = fwrite(vga_h, 1, 2, avifile);
fseek(avifile, 0xAC, SEEK_SET);
err = fwrite(vga_h, 1, 2, avifile);
} else if (framesize == 10) {
fseek(avifile, 0x40, SEEK_SET);
err = fwrite(uxga_w, 1, 2, avifile);
fseek(avifile, 0xA8, SEEK_SET);
err = fwrite(uxga_w, 1, 2, avifile);
fseek(avifile, 0x44, SEEK_SET);
err = fwrite(uxga_h, 1, 2, avifile);
fseek(avifile, 0xAC, SEEK_SET);
err = fwrite(uxga_h, 1, 2, avifile);
} else if (framesize == 9) {
fseek(avifile, 0x40, SEEK_SET);
err = fwrite(sxga_w, 1, 2, avifile);
fseek(avifile, 0xA8, SEEK_SET);
err = fwrite(sxga_w, 1, 2, avifile);
fseek(avifile, 0x44, SEEK_SET);
err = fwrite(sxga_h, 1, 2, avifile);
fseek(avifile, 0xAC, SEEK_SET);
err = fwrite(sxga_h, 1, 2, avifile);
} else if (framesize == 7) {
fseek(avifile, 0x40, SEEK_SET);
err = fwrite(svga_w, 1, 2, avifile);
fseek(avifile, 0xA8, SEEK_SET);
err = fwrite(svga_w, 1, 2, avifile);
fseek(avifile, 0x44, SEEK_SET);
err = fwrite(svga_h, 1, 2, avifile);
fseek(avifile, 0xAC, SEEK_SET);
err = fwrite(svga_h, 1, 2, avifile);
} else if (framesize == 5) {
fseek(avifile, 0x40, SEEK_SET);
err = fwrite(cif_w, 1, 2, avifile);
fseek(avifile, 0xA8, SEEK_SET);
err = fwrite(cif_w, 1, 2, avifile);
fseek(avifile, 0x44, SEEK_SET);
err = fwrite(cif_h, 1, 2, avifile);
fseek(avifile, 0xAC, SEEK_SET);
err = fwrite(cif_h, 1, 2, avifile);
}
fseek(avifile, AVIOFFSET, SEEK_SET);
Serial.print(F("\nRecording "));
Serial.print(avi_length);
Serial.println(" seconds.");
startms = millis();
totalp = 0;
totalw = 0;
jpeg_size = 0;
movi_size = 0;
uVideoLen = 0;
idx_offset = 4;
//frame_cnt = 0;
bad_jpg = 0;
extend_jpg = 0;
normal_jpg = 0;
} // end of start avi
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// another_save_avi saves another frame to the avi file, uodates index
// -- pass in a fb pointer to the frame to add
//
static esp_err_t another_save_avi(camera_fb_t * fb ) {
int fblen;
fblen = fb->len;
int fb_block_length;
uint8_t* fb_block_start;
jpeg_size = fblen;
movi_size += jpeg_size;
uVideoLen += jpeg_size;
remnant = (4 - (jpeg_size & 0x00000003)) & 0x00000003;
bw = millis();
long frame_write_start = millis();
framebuffer_static[3] = 0x63;
framebuffer_static[2] = 0x64;
framebuffer_static[1] = 0x30;
framebuffer_static[0] = 0x30;
int jpeg_size_rem = jpeg_size + remnant;
framebuffer_static[4] = jpeg_size_rem % 0x100;
framebuffer_static[5] = (jpeg_size_rem >> 8) % 0x100;
framebuffer_static[6] = (jpeg_size_rem >> 16) % 0x100;
framebuffer_static[7] = (jpeg_size_rem >> 24) % 0x100;
fb_block_start = fb->buf;
if (fblen > 64 * 1024 - 8 ) {
fb_block_length = 64 * 1024;
fblen = fblen - (64 * 1024 - 8);
memcpy(framebuffer_static + 8, fb_block_start, fb_block_length - 8);
fb_block_start = fb_block_start + fb_block_length - 8;
} else {
fb_block_length = fblen + 8 + remnant;
memcpy(framebuffer_static + 8, fb_block_start, fblen);
fblen = 0;
}
size_t err = fwrite(framebuffer_static, 1, fb_block_length, avifile);
if (err != fb_block_length) {
Serial.print("Error on avi write: err = "); Serial.print(err);
Serial.print(" len = "); Serial.println(fb_block_length);
}
while (fblen > 0) {
if (fblen > 64 * 1024) {
fb_block_length = 64 * 1024;
fblen = fblen - fb_block_length;
} else {
fb_block_length = fblen + remnant;
fblen = 0;
}
memcpy(framebuffer_static, fb_block_start, fb_block_length);
size_t err = fwrite(framebuffer_static, 1, fb_block_length, avifile);
if (err != fb_block_length) {
Serial.print("Error on avi write: err = "); Serial.print(err);
Serial.print(" len = "); Serial.println(fb_block_length);
}
fb_block_start = fb_block_start + fb_block_length;
}
long frame_write_end = millis();
print_2quartet(idx_offset, jpeg_size, idxfile);
idx_offset = idx_offset + jpeg_size + remnant + 8;
movi_size = movi_size + remnant;
totalw = totalw + millis() - bw;
} // end of another_pic_avi
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// end_avi writes the index, and closes the files
//
static esp_err_t end_avi() {
unsigned long current_end = 0;
current_end = ftell (avifile);
Serial.println("End of avi - closing the files");
if (frame_cnt < 10 ) {
Serial.println("Recording screwed up, less than 10 frames, forget index\n");
fclose(idxfile);
fclose(avifile);
int xx = remove("/sdcard/idx.tmp");
int yy = remove(fname);
} else {
elapsedms = millis() - startms;
float fRealFPS = (1000.0f * (float)frame_cnt) / ((float)elapsedms);
float fmicroseconds_per_frame = 1000000.0f / fRealFPS;
uint8_t iAttainedFPS = round(fRealFPS);
uint32_t us_per_frame = round(fmicroseconds_per_frame);
//Modify the MJPEG header from the beginning of the file, overwriting various placeholders
fseek(avifile, 4 , SEEK_SET);
print_quartet(movi_size + 240 + 16 * frame_cnt + 8 * frame_cnt, avifile);
fseek(avifile, 0x20 , SEEK_SET);
print_quartet(us_per_frame, avifile);
unsigned long max_bytes_per_sec = movi_size * iAttainedFPS / frame_cnt;
fseek(avifile, 0x24 , SEEK_SET);
print_quartet(max_bytes_per_sec, avifile);
fseek(avifile, 0x30 , SEEK_SET);
print_quartet(frame_cnt, avifile);
fseek(avifile, 0x8c , SEEK_SET);
print_quartet(frame_cnt, avifile);
fseek(avifile, 0x84 , SEEK_SET);
print_quartet((int)iAttainedFPS, avifile);
fseek(avifile, 0xe8 , SEEK_SET);
print_quartet(movi_size + frame_cnt * 8 + 4, avifile);
Serial.println(F("\n*** Video recorded and saved ***\n"));
Serial.print(F("Recorded "));
Serial.print(elapsedms / 1000);
Serial.print(F("s in "));
Serial.print(frame_cnt);
Serial.print(F(" frames\nFile size is "));
Serial.print(movi_size + 12 * frame_cnt + 4);
Serial.print(F(" bytes\nActual FPS is "));
Serial.print(fRealFPS, 2);
Serial.print(F("\nMax data rate is "));
Serial.print(max_bytes_per_sec);
Serial.print(F(" byte/s\nFrame duration is ")); Serial.print(us_per_frame); Serial.println(F(" us"));
Serial.print(F("Average frame length is ")); Serial.print(uVideoLen / frame_cnt); Serial.println(F(" bytes"));
Serial.print("Average picture time (ms) "); Serial.println( 1.0 * totalp / frame_cnt);
Serial.print("Average write time (ms) "); Serial.println( 1.0 * totalw / frame_cnt );
Serial.print("Normal jpg % "); Serial.println( 100.0 * normal_jpg / frame_cnt, 1 );
Serial.print("Extend jpg % "); Serial.println( 100.0 * extend_jpg / frame_cnt, 1 );
Serial.print("Bad jpg % "); Serial.println( 100.0 * bad_jpg / frame_cnt, 5 );
Serial.printf("Writng the index, %d frames\n", frame_cnt);
fseek(avifile, current_end, SEEK_SET);
fclose(idxfile);
size_t i1_err = fwrite(idx1_buf, 1, 4, avifile);
print_quartet(frame_cnt * 16, avifile);
idxfile = fopen("/sdcard/idx.tmp", "r");
if (idxfile != NULL) {
Serial.printf("File open: %s\n", "/sdcard/idx.tmp");
} else {
Serial.println("Could not open index file");
major_fail();
}
char * AteBytes;
AteBytes = (char*) malloc (8);
for (int i = 0; i < frame_cnt; i++) {
size_t res = fread ( AteBytes, 1, 8, idxfile);
size_t i1_err = fwrite(dc_buf, 1, 4, avifile);
size_t i2_err = fwrite(zero_buf, 1, 4, avifile);
size_t i3_err = fwrite(AteBytes, 1, 8, avifile);
}
free(AteBytes);
fclose(idxfile);
fclose(avifile);
int xx = remove("/sdcard/idx.tmp");
}
Serial.println("---");
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Time
#include "time.h"
// Workaround for the WebServer.h vs esp_http_server.h problem
#define _HTTP_Method_H_
typedef enum {
jHTTP_GET = 0b00000001,
jHTTP_POST = 0b00000010,
jHTTP_DELETE = 0b00000100,
jHTTP_PUT = 0b00001000,
jHTTP_PATCH = 0b00010000,
jHTTP_HEAD = 0b00100000,
jHTTP_OPTIONS = 0b01000000,
jHTTP_ANY = 0b01111111,
} HTTPMethod;
#include <WiFi.h>
#include <WiFiManager.h> //wifiman.1
#include <ESPmDNS.h>
time_t now;
struct tm timeinfo;
char localip[20];
bool init_wifi()
{
int connAttempts = 0;
uint32_t brown_reg_temp = READ_PERI_REG(RTC_CNTL_BROWN_OUT_REG);
WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0);
if (1) {
WiFiManager wm;
bool res;
//wm.resetSettings(); // for debugging
wm.setConnectTimeout(20); // how long to try to connect for before continuing
wm.setConfigPortalTimeout(30); // auto close configportal after n seconds
// res = wm.autoConnect(); // auto generated AP name from chipid
res = wm.autoConnect(devname); // use the devname defined above, with no password
//res = wm.autoConnect("AutoConnectAP","password"); // password protected ap
if (res) {
Serial.println("Succesful Connection using WiFiManager");
} else {
InternetFailed = true;
Serial.println("Internet failed using WiFiManager - not starting Web services");
}
} else {
WiFi.disconnect(true, true);
WiFi.mode(WIFI_STA);
WiFi.setHostname(devname);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED ) {
delay(1000);
Serial.print(".");
if (connAttempts++ == 5) break; // try for 5 seconds to get internet, then give up
}
}
if (!InternetFailed){
Serial.printf("\nInternet status: %d\n", WiFi.status());
if (!MDNS.begin(devname)) {
Serial.println("Error setting up MDNS responder!");
} else {
Serial.printf("mDNS responder started '%s'\n", devname);
}
configTime(0, 0, "pool.ntp.org");
setenv("TZ", TIMEZONE, 1); // mountain time zone from #define at top
tzset();
time(&now);
while (now < 10) { // try for 5 seconds to get the time, then give up - 10 seconds after boot
delay(1000);
Serial.print("o");
time(&now);
}
Serial.print("Local time: "); Serial.print(ctime(&now));
sprintf(localip, "%s", WiFi.localIP().toString().c_str());
Serial.print("IP: "); Serial.println(localip); Serial.println(" ");
}
WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, brown_reg_temp);
return true;
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
//
#include <HTTPClient.h>
httpd_handle_t camera_httpd = NULL;
char the_page[4000];
static esp_err_t capture_handler(httpd_req_t *req) {
camera_fb_t * fb = NULL;
esp_err_t res = ESP_OK;
char fname[100];
int file_number = 0;
//Serial.print("capture, core "); Serial.print(xPortGetCoreID());
//Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL));
file_number++;
sprintf(fname, "inline; filename=capture_%d.jpg", file_number);
if (fb_next == NULL) {
fb = esp_camera_fb_get();
framebuffer_len = fb->len;
memcpy(framebuffer, fb->buf, framebuffer_len);
esp_camera_fb_return(fb);
} else {
fb = fb_next;
framebuffer_len = fb->len;
memcpy(framebuffer, fb->buf, framebuffer_len);
}
httpd_resp_set_type(req, "image/jpeg");
httpd_resp_set_hdr(req, "Content-Disposition", fname);
res = httpd_resp_send(req, (const char *)framebuffer, framebuffer_len);
return res;
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
//
static esp_err_t index_handler(httpd_req_t *req) {
Serial.print("http index, core "); Serial.print(xPortGetCoreID());
Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL));
const char the_message[] = "Status";
time(&now);
const char *strdate = ctime(&now);
int tot = SD_MMC.totalBytes() / (1024 * 1024);
int use = SD_MMC.usedBytes() / (1024 * 1024);
long rssi = WiFi.RSSI();
const char msg[] PROGMEM = R"rawliteral(<!doctype html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width,initial-scale=1">
<title>%s ESP32-CAM Video Recorder Junior</title>
</head>
<body>
<h1>%s<br>ESP32-CAM Video Recorder Junior %s <br><font color="red">%s</font></h1><br>
Used / Total SD Space <font color="red"> %d MB / %d MB</font><br>
Rssi %d<br>
Filename: %s <br>
Framesize %d, Quality %d <br>
Avg framesize %d, fps %.1f <br>
Time left in current video %d seconds<br>
<br>
<h3><a href="http://%s/">http://%s/</a></h3>
<h3><a href="http://%s/stream">Stream at 5 fps </a></h3>
<h3><a href="http://%s/photos">Photos - 15 saveable photos @ every 2 seconds </a></h3>
</body>
</html>)rawliteral";
int time_left = (- millis() + (avi_start_time + avi_length * 1000)) / 1000;
if (stop == 0) {
time_left = 0;
}
sprintf(the_page, msg, devname, devname, vernum, strdate, use, tot, rssi, fname,
framesize, quality, most_recent_avg_framesize, most_recent_fps, time_left,
localip, localip, localip, localip);
httpd_resp_send(req, the_page, strlen(the_page));
return ESP_OK;
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
//
static esp_err_t photos_handler(httpd_req_t *req) {
Serial.print("http photos, core "); Serial.print(xPortGetCoreID());
Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL));
const char the_message[] = "Status";
time(&now);
const char *strdate = ctime(&now);
const char msg[] PROGMEM = R"rawliteral(<!doctype html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width,initial-scale=1">
<title>%s ESP32-CAM Video Recorder Junior</title>
</head>
<body>
<h1>%s<br>ESP32-CAM Video Recorder Junior %s <br><font color="red">%s</font></h1><br>
<br>
One photo every 2 seconds for 30 seconds - roll forward or back - refresh for more live photos
<br>
<br><div id="image-container"></div>
<script>
document.addEventListener('DOMContentLoaded', function() {
var c = document.location.origin;
const ic = document.getElementById('image-container');
var i = 1;
var timing = 2000; // time between snapshots for multiple shots
function loop() {
ic.insertAdjacentHTML('beforeend','<img src="'+`${c}/capture?_cb=${Date.now()}`+'">')
ic.insertAdjacentHTML('beforeend','<br>')
ic.insertAdjacentHTML('beforeend',Date())
ic.insertAdjacentHTML('beforeend','<br>')
i = i + 1;
if ( i <= 15 ) { // 1 frame every 2 seconds for 15 seconds
window.setTimeout(loop, timing);
}
}
loop();
})
</script><br>
</body>
</html>)rawliteral";
sprintf(the_page, msg, devname, devname, vernum, strdate );
httpd_resp_send(req, the_page, strlen(the_page));
return ESP_OK;
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// Streaming stuff based on Random Nerd
//
//
#define PART_BOUNDARY "123456789000000000000987654321"
static const char* _STREAM_CONTENT_TYPE = "multipart/x-mixed-replace;boundary=" PART_BOUNDARY;
static const char* _STREAM_BOUNDARY = "\r\n--" PART_BOUNDARY "\r\n";
static const char* _STREAM_PART = "Content-Type: image/jpeg\r\nContent-Length: %u\r\n\r\n";
static esp_err_t stream_handler(httpd_req_t *req) {
camera_fb_t * fb = NULL;
esp_err_t res = ESP_OK;
size_t _jpg_buf_len = 0;
uint8_t * _jpg_buf = NULL;
char * part_buf[64];
Serial.print("stream_handler, core "); Serial.print(xPortGetCoreID());
Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL));
res = httpd_resp_set_type(req, _STREAM_CONTENT_TYPE);
if (res != ESP_OK) {
return res;
}
while (true) {
if (fb_next == NULL) {
fb = esp_camera_fb_get();
framebuffer_len = fb->len;
memcpy(framebuffer, fb->buf, framebuffer_len);
esp_camera_fb_return(fb);
} else {
fb = fb_next;
framebuffer_len = fb->len;
memcpy(framebuffer, fb->buf, framebuffer_len);
}
_jpg_buf_len = framebuffer_len;
_jpg_buf = framebuffer;
size_t hlen = snprintf((char *)part_buf, 64, _STREAM_PART, _jpg_buf_len);
res = httpd_resp_send_chunk(req, (const char *)part_buf, hlen);
if (res != ESP_OK) {
return res;
}
res = httpd_resp_send_chunk(req, (const char *)_jpg_buf, _jpg_buf_len);
if (res != ESP_OK) {
return res;
}
res = httpd_resp_send_chunk(req, _STREAM_BOUNDARY, strlen(_STREAM_BOUNDARY));
if (res != ESP_OK) {
return res;
}
if (fb_next == NULL) {
esp_camera_fb_return(fb);
}
delay(200); // 200 ms = 5 fps !!!
}
return res;
}
void startCameraServer() {
httpd_config_t config = HTTPD_DEFAULT_CONFIG();
Serial.print("http task prio: "); Serial.println(config.task_priority);
httpd_uri_t index_uri = {
.uri = "/",
.method = HTTP_GET,
.handler = index_handler,
.user_ctx = NULL
};
httpd_uri_t capture_uri = {
.uri = "/capture",
.method = HTTP_GET,
.handler = capture_handler,
.user_ctx = NULL
};
httpd_uri_t stream_uri = {
.uri = "/stream",
.method = HTTP_GET,
.handler = stream_handler,
.user_ctx = NULL
};
httpd_uri_t photos_uri = {
.uri = "/photos",
.method = HTTP_GET,
.handler = photos_handler,
.user_ctx = NULL
};
if (httpd_start(&camera_httpd, &config) == ESP_OK) {
httpd_register_uri_handler(camera_httpd, &index_uri);
httpd_register_uri_handler(camera_httpd, &capture_uri);
httpd_register_uri_handler(camera_httpd, &stream_uri);
httpd_register_uri_handler(camera_httpd, &photos_uri);
}
Serial.println("Camera http started");
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
void setup() {
Serial.begin(115200);
Serial.println("\n\n---");
pinMode(33, OUTPUT); // little red led on back of chip
digitalWrite(33, LOW); // turn on the red LED on the back of chip
pinMode(4, OUTPUT); // Blinding Disk-Avtive Light
digitalWrite(4, LOW); // turn off
pinMode(12, INPUT_PULLUP); // pull this down to stop recording
pinMode(13, INPUT_PULLUP); // pull this down switch to UXGA
//Serial.setDebugOutput(true);
Serial.println(" ");
Serial.println("-------------------------------------");
Serial.printf("ESP32-CAM-Video-Recorder-junior %s\n", vernum);
Serial.println("-------------------------------------");
Serial.print("setup, core "); Serial.print(xPortGetCoreID());
Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL));
//Serial.printf("Internal Total heap %d, internal Free Heap %d\n", ESP.getHeapSize(), ESP.getFreeHeap());
//Serial.printf("SPIRam Total heap %d, SPIRam Free Heap %d\n", ESP.getPsramSize(), ESP.getFreePsram());
if (IncludeInternet) {
Serial.println("Starting the wifi ...");
init_wifi();
}
Serial.println("Setting up the camera ...");
config_camera();
//Serial.printf("Internal Total heap %d, internal Free Heap %d\n", ESP.getHeapSize(), ESP.getFreeHeap());
//Serial.printf("SPIRam Total heap %d, SPIRam Free Heap %d\n", ESP.getPsramSize(), ESP.getFreePsram());
// SD camera init
esp_err_t card_err = init_sdcard();
if (card_err != ESP_OK) {
Serial.printf("SD Card init failed with error 0x%x", card_err);
major_fail();
return;
}
//Serial.printf("Internal Total heap %d, internal Free Heap %d\n", ESP.getHeapSize(), ESP.getFreeHeap());
//Serial.printf("SPIRam Total heap %d, SPIRam Free Heap %d\n", ESP.getPsramSize(), ESP.getFreePsram());
digitalWrite(33, HIGH); // red light turns off when setup is complete
Serial.println("Warming up the camera ... here are some frames sizes ...");
for (int i = 0; i < 10; i++) {
camera_fb_t * fb = esp_camera_fb_get();
Serial.printf("frame %d, len %d\n", i, fb->len);
esp_camera_fb_return(fb);
delay(100);
}
do_eprom_read();
if (IncludeInternet && !InternetFailed) {
Serial.println("Start Web ...");
startCameraServer();
}
framebuffer = (uint8_t*)ps_malloc(512 * 1024); // buffer to store a jpg in motion
Serial.println(" End of setup()\n\n");
boot_time = millis();
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// loop()
void loop() {
if (first) {
Serial.print("the loop, core "); Serial.print(xPortGetCoreID());
Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL));
first = 0;
frame_cnt = 0;
stop_2nd_opinion = digitalRead(12);
stop_1st_opinion = digitalRead(12);
}
frame_cnt = frame_cnt + 1;
stop_2nd_opinion = stop_1st_opinion;
stop_1st_opinion = digitalRead(12);
if (stop_1st_opinion == stop_2nd_opinion ) {
if (stop_1st_opinion > 0 ) stop = 1;
else stop = 0;
} else {
//Serial.println("Stop disagree");
}
// if (frame_cnt == 1 && stop == 0) // do nothing
// if (frame_cnt == 1 && stop == 1) // start a movie
// if (frame_cnt > 1 && stop == 0) // stop the movie
// if (frame_cnt > 1 && stop != 0) // another frame
if (frame_cnt == 1 && stop == 0) {
// Serial.println("Do nothing");
if (we_are_already_stopped == 0) Serial.println("\n\nDisconnect Pin 12 from GND to start recording.\n\n");
frame_cnt = frame_cnt - 1;
we_are_already_stopped = 1;
delay(100);
} else if (frame_cnt == 1 && stop == 1) {
//Serial.println("Ready to start");
we_are_already_stopped = 0;
int read13 = digitalRead(13);
delay(20);
read13 = read13 + digitalRead(13); // get 2 opinions to help poor soldering
if (read13 == 0 ) {
if ( c1_or_c2 == 1 ) {
c1_or_c2 = 2;
framesize = c2_framesize;
quality = c2_quality;
avi_length = c2_avi_length;
Serial.println("Pin 13 is grounded, switching to config 2");
sensor_t * ss = esp_camera_sensor_get();
ss->set_quality(ss, quality);
ss->set_framesize(ss, (framesize_t) framesize);
ss->set_brightness(ss, 1); //up the blightness just a bit
ss->set_saturation(ss, -2); //lower the saturation
delay(800);
for (int j = 0; j < 4; j++) {
camera_fb_t * fb = esp_camera_fb_get();
//Serial.print("Pic, len="); Serial.println(fb->len);
esp_camera_fb_return(fb);
delay(50);
}
}
} else { // read13 = 1, so we want config 1
if ( c1_or_c2 == 2) {
c1_or_c2 = 1;
framesize = c1_framesize;
quality = c1_quality;
avi_length = c1_avi_length;
Serial.println("Pin 13 not grounded, switching to config 1");
sensor_t * ss = esp_camera_sensor_get();
ss->set_quality(ss, quality);
ss->set_framesize(ss, (framesize_t)framesize);
ss->set_brightness(ss, 1); //up the blightness just a bit
ss->set_saturation(ss, -2); //lower the saturation
delay(800);
for (int j = 0; j < 4; j++) {
camera_fb_t * fb = esp_camera_fb_get();
//Serial.print("Pic, len="); Serial.println(fb->len);
esp_camera_fb_return(fb);
delay(50);
}
}
}
avi_start_time = millis();
Serial.printf("Start the avi ... at %d\n", avi_start_time);
Serial.printf("Framesize %d, quality %d, length %d seconds\n\n", framesize, quality, avi_length);
fb_curr = get_good_jpeg(); // should take zero time
start_avi();
fb_next = get_good_jpeg(); // should take nearly zero time due to time spent writing header
another_save_avi( fb_curr); // put first frame in avi
digitalWrite(33, frame_cnt % 2); // blink
esp_camera_fb_return(fb_curr); // get rid of first frame
fb_curr = NULL;
} else if ( (frame_cnt > 1 && stop == 0) || millis() > (avi_start_time + avi_length * 1000)) { // end the avi
Serial.println("End the Avi");
fb_curr = fb_next;
fb_next = NULL;
another_save_avi(fb_curr); // save final frame of avi
digitalWrite(33, frame_cnt % 2);
esp_camera_fb_return(fb_curr);
fb_curr = NULL;
end_avi(); // end the movie
digitalWrite(33, HIGH); // light off
avi_end_time = millis();
float fps = frame_cnt / ((avi_end_time - avi_start_time) / 1000) ;
Serial.printf("End the avi at %d. It was %d frames, %d ms at %.1f fps...\n", millis(), frame_cnt, avi_end_time, avi_end_time - avi_start_time, fps);
frame_cnt = 0; // start recording again on the next loop
} else if (frame_cnt > 1 && stop != 0) { // another frame of the avi
//Serial.println("Another frame");
fb_curr = fb_next; // we will write a frame, and get the camera preparing a new one
fb_next = get_good_jpeg(); // should take near zero, unless the sd is faster than the camera, when we will have to wait for the camera
another_save_avi(fb_curr);
digitalWrite(33, frame_cnt % 2);
esp_camera_fb_return(fb_curr);
fb_curr = NULL;
if (frame_cnt % 100 == 10 ) { // print some status every 100 frames
if (frame_cnt == 10) {
bytes_before_last_100_frames = movi_size;
time_before_last_100_frames = millis();
} else {
most_recent_fps = 100.0 / ((millis() - time_before_last_100_frames) / 1000.0) ;
most_recent_avg_framesize = (movi_size - bytes_before_last_100_frames) / 100;
Serial.printf("So far: %04d frames, in %6.1f seconds, for last 100 frames: avg frame size %6.1f kb, %.2f fps ...\n", frame_cnt, 0.001 * (millis() - avi_start_time), 1.0 / 1024 * most_recent_avg_framesize, most_recent_fps);
total_delay = 0;
bytes_before_last_100_frames = movi_size;
time_before_last_100_frames = millis();
}
}
}
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik