diff --git a/v58/ESP32-CAM-Video-Recorder-junior-58x.xxx b/v58/ESP32-CAM-Video-Recorder-junior-58x.xxx deleted file mode 100644 index 82b71bd..0000000 --- a/v58/ESP32-CAM-Video-Recorder-junior-58x.xxx +++ /dev/null @@ -1,2174 +0,0 @@ -/* - - ESP32-CAM-Video-Recorder-junior - - This program records an mjpeg avi video to the sd card of an ESP32-CAM. - - - It is the junior version of https://github.com/jameszah/ESP32-CAM-Video-Recorder - which has 100 other features of wifi, streaming video, http control, telegram updates, pir control, - touch control, ftp downloads, .... and other things that make it very big and complex. - - Just set a few parameters, compile and download, and it will record on power-on, until sd is full, or power-off. - Then pull out the sd and move it to your computer, and you will see all but the last file avi which died during the unplug. - - The files will have the name such as: - - desklens10.003.avi - - "desklens" is your devname - 10 - is a number stored in eprom that will increase everytime your device boots - 3 - is the 3rd file created during the current boot - - Small red led on the back blinks with every frame. - - - by James Zahary Sep 12, 2020 - jamzah.plc@gmail.com - - - v50 apr 13, 2021 - tidy - - v50lpmod apr 28, 2021 - shut off low power modem - - v53 jul 8, 2021 - get rid on no wifi message cloggoing up log file - - v56 dec 23, 2021 - tzchar to 60 bytes - - add esp32 sd filemanager to download files - - v57 dec 28, 2021 - final changes to https://github.com/jameszah/ESPxWebFlMgr/tree/master/esp32_sd_file_manager - - v58 dec 30, 2021 - changes for Arduino 1.8.19 and esp32 Board Library 2.0.2 - - https://github.com/jameszah/ESP32-CAM-Video-Recorder-junior - - jameszah/ESP32-CAM-Video-Recorder-junior is licensed under the - GNU General Public License v3.0 - - The is Arduino code, with standard setup for ESP32-CAM - - Board ESP32 Wrover Module - - Partition Scheme Huge APP (3MB No OTA) - - or with AI Thinker ESP32-CAM - - Needs these libraries or better: - - ArduinoJson 6.18.5 by Benoit Blanchon - WiFiManager 2.05-beat by tablatronix - - Compiled with Arduino 1.8.19, and esp32-arduino core version 2.0.2, on Dec 30, 2021. - - -Using library FS at version 2.0.0 in folder: C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\hardware\esp32\2.0.2\libraries\FS -Using library SD_MMC at version 2.0.0 in folder: C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\hardware\esp32\2.0.2\libraries\SD_MMC -Using library EEPROM at version 2.0.0 in folder: C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\hardware\esp32\2.0.2\libraries\EEPROM -Using library WiFi at version 2.0.0 in folder: C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\hardware\esp32\2.0.2\libraries\WiFi -Using library WiFiManager at version 2.0.5-beta in folder: C:\ArduinoPortable\arduino-1.8.19\portable\sketchbook\libraries\WiFiManager -Using library Update at version 2.0.0 in folder: C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\hardware\esp32\2.0.2\libraries\Update -Using library WebServer at version 2.0.0 in folder: C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\hardware\esp32\2.0.2\libraries\WebServer -Using library DNSServer at version 2.0.0 in folder: C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\hardware\esp32\2.0.2\libraries\DNSServer -Using library ESPmDNS at version 2.0.0 in folder: C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\hardware\esp32\2.0.2\libraries\ESPmDNS -Using library HTTPClient at version 2.0.0 in folder: C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\hardware\esp32\2.0.2\libraries\HTTPClient -Using library WiFiClientSecure at version 2.0.0 in folder: C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\hardware\esp32\2.0.2\libraries\WiFiClientSecure -"C:\\ArduinoPortable\\arduino-1.8.19\\portable\\packages\\esp32\\tools\\xtensa-esp32-elf-gcc\\gcc8_4_0-esp-2021r2/bin/xtensa-esp32-elf-size" -A "C:\\Users\\James\\AppData\\Local\\Temp\\arduino_build_895714/ESP32-CAM-Video-Recorder-junior-58x.ino.elf" -Sketch uses 1056201 bytes (33%) of program storage space. Maximum is 3145728 bytes. -Global variables use 59268 bytes (18%) of dynamic memory, leaving 268412 bytes for local variables. Maximum is 327680 bytes. -C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\tools\esptool_py\3.1.0/esptool.exe --chip esp32 --port COM7 --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0xe000 C:\ArduinoPortable\arduino-1.8.19\portable\packages\esp32\hardware\esp32\2.0.2/tools/partitions/boot_app0.bin 0x1000 C:\Users\James\AppData\Local\Temp\arduino_build_895714/ESP32-CAM-Video-Recorder-junior-58x.ino.bootloader.bin 0x10000 C:\Users\James\AppData\Local\Temp\arduino_build_895714/ESP32-CAM-Video-Recorder-junior-58x.ino.bin 0x8000 C:\Users\James\AppData\Local\Temp\arduino_build_895714/ESP32-CAM-Video-Recorder-junior-58x.ino.partitions.bin - - -*/ - -//#define LOG_LOCAL_LEVEL ESP_LOG_VERBOSE -#include "esp_log.h" -#include "esp_http_server.h" -#include "esp_camera.h" -#include "sensor.h" -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// user edits here: - -static const char vernum[] = "v58"; -char devname[30]; -String devstr = "desklens"; - -int IncludeInternet = 0; // 0 for no internet, 1 for time only, 2 streaming with WiFiMan, 3 ssid in file, 4 default internet on and file - - -const char* ssid = "jzjzjz"; -const char* password = "jzjzjz"; - - - -// https://sites.google.com/a/usapiens.com/opnode/time-zones -- find your timezone here -String TIMEZONE = "GMT0BST,M3.5.0/01,M10.5.0/02"; -//String TIMEZONE = "MST7MDT,M3.2.0/2:00:00,M11.1.0/2:00:00"; -#define Lots_of_Stats 1 - -int framesize = FRAMESIZE_HD; -int quality = 12; -int framesizeconfig = FRAMESIZE_UXGA; -int qualityconfig = 5; -int buffersconfig = 3; -int avi_length = 1800; // how long a movie in seconds -- 1800 sec = 30 min -int frame_interval = 0; // record at full speed -int speed_up_factor = 1; // play at realtime -int stream_delay = 500; // minimum of 500 ms delay between frames -int MagicNumber = 12; // change this number to reset the eprom in your esp32 for file numbers - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -bool configfile = false; -bool InternetOff = true; -bool reboot_now = false; -String cssid; -String cpass; -String czone; - -TaskHandle_t the_camera_loop_task; -TaskHandle_t the_sd_loop_task; -TaskHandle_t the_streaming_loop_task; - -static SemaphoreHandle_t wait_for_sd; -static SemaphoreHandle_t sd_go; - -long current_frame_time; -long last_frame_time; - - -// https://github.com/espressif/esp32-camera/issues/182 -#define fbs 8 // was 64 -- how many kb of static ram for psram -> sram buffer for sd write -uint8_t framebuffer_static[fbs * 1024 + 20]; - -// CAMERA_MODEL_AI_THINKER -#define PWDN_GPIO_NUM 32 -#define RESET_GPIO_NUM -1 -#define XCLK_GPIO_NUM 0 -#define SIOD_GPIO_NUM 26 -#define SIOC_GPIO_NUM 27 -#define Y9_GPIO_NUM 35 -#define Y8_GPIO_NUM 34 -#define Y7_GPIO_NUM 39 -#define Y6_GPIO_NUM 36 -#define Y5_GPIO_NUM 21 -#define Y4_GPIO_NUM 19 -#define Y3_GPIO_NUM 18 -#define Y2_GPIO_NUM 5 -#define VSYNC_GPIO_NUM 25 -#define HREF_GPIO_NUM 23 -#define PCLK_GPIO_NUM 22 - -camera_fb_t * fb_curr = NULL; -camera_fb_t * fb_next = NULL; - -#include -#include "freertos/FreeRTOS.h" -#include "freertos/task.h" -#include "esp_system.h" -#include "nvs_flash.h" -#include "nvs.h" -#include "soc/soc.h" -#include "soc/cpu.h" -#include "soc/rtc_cntl_reg.h" - -static esp_err_t cam_err; -float most_recent_fps = 0; -int most_recent_avg_framesize = 0; - -uint8_t* framebuffer; -int framebuffer_len; - -int first = 1; -long frame_start = 0; -long frame_end = 0; -long frame_total = 0; -long frame_average = 0; -long loop_average = 0; -long loop_total = 0; -long total_frame_data = 0; -long last_frame_length = 0; -int done = 0; -long avi_start_time = 0; -long avi_end_time = 0; -int start_record = 0; -int start_record_2nd_opinion = -2; -int start_record_1st_opinion = -1; - -int we_are_already_stopped = 0; -long total_delay = 0; -long bytes_before_last_100_frames = 0; -long time_before_last_100_frames = 0; - -long time_in_loop = 0; -long time_in_camera = 0; -long time_in_sd = 0; -long time_in_good = 0; -long time_total = 0; -long time_in_web1 = 0; -long time_in_web2 = 0; -long delay_wait_for_sd = 0; -long wait_for_cam = 0; - -int do_it_now = 0; - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// Avi Writer Stuff here - - -// MicroSD -#include "driver/sdmmc_host.h" -#include "driver/sdmmc_defs.h" -#include "sdmmc_cmd.h" -#include "esp_vfs_fat.h" -#include "FS.h" -#include - -File logfile; -File avifile; -File idxfile; - -char avi_file_name[100]; - -static int i = 0; -uint16_t frame_cnt = 0; -uint16_t remnant = 0; -uint32_t length = 0; -uint32_t startms; -uint32_t elapsedms; -uint32_t uVideoLen = 0; - -int bad_jpg = 0; -int extend_jpg = 0; -int normal_jpg = 0; - -int file_number = 0; -int file_group = 0; -long boot_time = 0; - -long totalp; -long totalw; - -#define BUFFSIZE 512 - -uint8_t buf[BUFFSIZE]; - -#define AVIOFFSET 240 // AVI main header length - -unsigned long movi_size = 0; -unsigned long jpeg_size = 0; -unsigned long idx_offset = 0; - -uint8_t zero_buf[4] = {0x00, 0x00, 0x00, 0x00}; -uint8_t dc_buf[4] = {0x30, 0x30, 0x64, 0x63}; // "00dc" -uint8_t dc_and_zero_buf[8] = {0x30, 0x30, 0x64, 0x63, 0x00, 0x00, 0x00, 0x00}; - -uint8_t avi1_buf[4] = {0x41, 0x56, 0x49, 0x31}; // "AVI1" -uint8_t idx1_buf[4] = {0x69, 0x64, 0x78, 0x31}; // "idx1" - - -struct frameSizeStruct { - uint8_t frameWidth[2]; - uint8_t frameHeight[2]; -}; - -// data structure from here https://github.com/s60sc/ESP32-CAM_MJPEG2SD/blob/master/avi.cpp, extended for ov5640 - -static const frameSizeStruct frameSizeData[] = { - {{0x60, 0x00}, {0x60, 0x00}}, // FRAMESIZE_96X96, // 96x96 - {{0xA0, 0x00}, {0x78, 0x00}}, // FRAMESIZE_QQVGA, // 160x120 - {{0xB0, 0x00}, {0x90, 0x00}}, // FRAMESIZE_QCIF, // 176x144 - {{0xF0, 0x00}, {0xB0, 0x00}}, // FRAMESIZE_HQVGA, // 240x176 - {{0xF0, 0x00}, {0xF0, 0x00}}, // FRAMESIZE_240X240, // 240x240 - {{0x40, 0x01}, {0xF0, 0x00}}, // FRAMESIZE_QVGA, // 320x240 framessize - {{0x90, 0x01}, {0x28, 0x01}}, // FRAMESIZE_CIF, // 400x296 bytes per buffer required in psram - quality must be higher number (lower quality) than config quality - {{0xE0, 0x01}, {0x40, 0x01}}, // FRAMESIZE_HVGA, // 480x320 low qual med qual high quality - {{0x80, 0x02}, {0xE0, 0x01}}, // FRAMESIZE_VGA, // 640x480 8 11+ ## 6-10 ## 0-5 indoor(56,COUNT=3) (56,COUNT=2) (56,count=1) - // 38,400 61,440 153,600 - {{0x20, 0x03}, {0x58, 0x02}}, // FRAMESIZE_SVGA, // 800x600 9 240,000 - {{0x00, 0x04}, {0x00, 0x03}}, // FRAMESIZE_XGA, // 1024x768 10 - {{0x00, 0x05}, {0xD0, 0x02}}, // FRAMESIZE_HD, // 1280x720 11 115,200 184,320 460,800 (11)50.000 25.4fps (11)50.000 12fps (11)50,000 12.7fps - {{0x00, 0x05}, {0x00, 0x04}}, // FRAMESIZE_SXGA, // 1280x1024 12 - {{0x40, 0x06}, {0xB0, 0x04}}, // FRAMESIZE_UXGA, // 1600x1200 13 240,000 384,000 960,000 - // 3MP Sensors - {{0x80, 0x07}, {0x38, 0x04}}, // FRAMESIZE_FHD, // 1920x1080 14 259,200 414,720 1,036,800 (11)210,000 5.91fps - {{0xD0, 0x02}, {0x00, 0x05}}, // FRAMESIZE_P_HD, // 720x1280 15 - {{0x60, 0x03}, {0x00, 0x06}}, // FRAMESIZE_P_3MP, // 864x1536 16 - {{0x00, 0x08}, {0x00, 0x06}}, // FRAMESIZE_QXGA, // 2048x1536 17 393,216 629,146 1,572,864 - // 5MP Sensors - {{0x00, 0x0A}, {0xA0, 0x05}}, // FRAMESIZE_QHD, // 2560x1440 18 460,800 737,280 1,843,200 (11)400,000 3.5fps (11)330,000 1.95fps - {{0x00, 0x0A}, {0x40, 0x06}}, // FRAMESIZE_WQXGA, // 2560x1600 19 - {{0x38, 0x04}, {0x80, 0x07}}, // FRAMESIZE_P_FHD, // 1080x1920 20 - {{0x00, 0x0A}, {0x80, 0x07}} // FRAMESIZE_QSXGA, // 2560x1920 21 614,400 983,040 2,457,600 (15)425,000 3.25fps (15)382,000 1.7fps (15)385,000 1.7fps - -}; - -const int avi_header[AVIOFFSET] PROGMEM = { - 0x52, 0x49, 0x46, 0x46, 0xD8, 0x01, 0x0E, 0x00, 0x41, 0x56, 0x49, 0x20, 0x4C, 0x49, 0x53, 0x54, - 0xD0, 0x00, 0x00, 0x00, 0x68, 0x64, 0x72, 0x6C, 0x61, 0x76, 0x69, 0x68, 0x38, 0x00, 0x00, 0x00, - 0xA0, 0x86, 0x01, 0x00, 0x80, 0x66, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, - 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x80, 0x02, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4C, 0x49, 0x53, 0x54, 0x84, 0x00, 0x00, 0x00, - 0x73, 0x74, 0x72, 0x6C, 0x73, 0x74, 0x72, 0x68, 0x30, 0x00, 0x00, 0x00, 0x76, 0x69, 0x64, 0x73, - 0x4D, 0x4A, 0x50, 0x47, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0A, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x73, 0x74, 0x72, 0x66, - 0x28, 0x00, 0x00, 0x00, 0x28, 0x00, 0x00, 0x00, 0x80, 0x02, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00, - 0x01, 0x00, 0x18, 0x00, 0x4D, 0x4A, 0x50, 0x47, 0x00, 0x84, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x49, 0x4E, 0x46, 0x4F, - 0x10, 0x00, 0x00, 0x00, 0x6A, 0x61, 0x6D, 0x65, 0x73, 0x7A, 0x61, 0x68, 0x61, 0x72, 0x79, 0x20, - 0x76, 0x35, 0x38, 0x20, 0x4C, 0x49, 0x53, 0x54, 0x00, 0x01, 0x0E, 0x00, 0x6D, 0x6F, 0x76, 0x69, -}; - - -// -// Writes an uint32_t in Big Endian at current file position -// -static void inline print_quartet(unsigned long i, File fd) { - - uint8_t y[4]; - y[0] = i % 0x100; - y[1] = (i >> 8) % 0x100; - y[2] = (i >> 16) % 0x100; - y[3] = (i >> 24) % 0x100; - size_t i1_err = fd.write(y , 4); -} - -// -// Writes 2 uint32_t in Big Endian at current file position -// -static void inline print_2quartet(unsigned long i, unsigned long j, File fd) { - - uint8_t y[8]; - y[0] = i % 0x100; - y[1] = (i >> 8) % 0x100; - y[2] = (i >> 16) % 0x100; - y[3] = (i >> 24) % 0x100; - y[4] = j % 0x100; - y[5] = (j >> 8) % 0x100; - y[6] = (j >> 16) % 0x100; - y[7] = (j >> 24) % 0x100; - size_t i1_err = fd.write(y , 8); -} - -// -// if we have no camera, or sd card, then flash rear led on and off to warn the human SOS - SOS -// -void major_fail() { - - Serial.println(" "); - logfile.close(); - - for (int i = 0; i < 10; i++) { // 10 loops or about 100 seconds then reboot - for (int j = 0; j < 3; j++) { - digitalWrite(33, LOW); delay(150); - digitalWrite(33, HIGH); delay(150); - } - delay(1000); - - for (int j = 0; j < 3; j++) { - digitalWrite(33, LOW); delay(500); - digitalWrite(33, HIGH); delay(500); - } - delay(1000); - Serial.print("Major Fail "); Serial.print(i); Serial.print(" / "); Serial.println(10); - } - - ESP.restart(); -} - - - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// - -static void config_camera() { - - camera_config_t config; - - //Serial.println("config camera"); - - config.ledc_channel = LEDC_CHANNEL_0; - config.ledc_timer = LEDC_TIMER_0; - config.pin_d0 = Y2_GPIO_NUM; - config.pin_d1 = Y3_GPIO_NUM; - config.pin_d2 = Y4_GPIO_NUM; - config.pin_d3 = Y5_GPIO_NUM; - config.pin_d4 = Y6_GPIO_NUM; - config.pin_d5 = Y7_GPIO_NUM; - config.pin_d6 = Y8_GPIO_NUM; - config.pin_d7 = Y9_GPIO_NUM; - config.pin_xclk = XCLK_GPIO_NUM; - config.pin_pclk = PCLK_GPIO_NUM; - config.pin_vsync = VSYNC_GPIO_NUM; - config.pin_href = HREF_GPIO_NUM; - config.pin_sscb_sda = SIOD_GPIO_NUM; - config.pin_sscb_scl = SIOC_GPIO_NUM; - config.pin_pwdn = PWDN_GPIO_NUM; - config.pin_reset = RESET_GPIO_NUM; - - config.xclk_freq_hz = 20000000; // 10000000 or 20000000 -- 100 is faster with v1.04 // 200 is faster with v1.06 // 16500000 is an option - - config.pixel_format = PIXFORMAT_JPEG; - - Serial.printf("Frame config %d, quality config %d, buffers config %d\n", framesizeconfig, qualityconfig, buffersconfig); - config.frame_size = (framesize_t)framesizeconfig; - config.jpeg_quality = qualityconfig; - config.fb_count = buffersconfig; - - - if (Lots_of_Stats) { - Serial.printf("Before camera config ..."); - Serial.printf("Internal Total heap %d, internal Free Heap %d, ", ESP.getHeapSize(), ESP.getFreeHeap()); - Serial.printf("SPIRam Total heap %d, SPIRam Free Heap %d\n", ESP.getPsramSize(), ESP.getFreePsram()); - } - esp_err_t cam_err = ESP_FAIL; - int attempt = 5; - while (attempt && cam_err != ESP_OK) { - cam_err = esp_camera_init(&config); - if (cam_err != ESP_OK) { - Serial.printf("Camera init failed with error 0x%x", cam_err); - digitalWrite(PWDN_GPIO_NUM, 1); - delay(500); - digitalWrite(PWDN_GPIO_NUM, 0); // power cycle the camera (OV2640) - attempt--; - } - } - - if (Lots_of_Stats) { - Serial.printf("After camera config ..."); - Serial.printf("Internal Total heap %d, internal Free Heap %d, ", ESP.getHeapSize(), ESP.getFreeHeap()); - Serial.printf("SPIRam Total heap %d, SPIRam Free Heap %d\n", ESP.getPsramSize(), ESP.getFreePsram()); - } - - if (cam_err != ESP_OK) { - major_fail(); - } - - sensor_t * ss = esp_camera_sensor_get(); - - ///ss->set_hmirror(ss, 1); // 0 = disable , 1 = enable - ///ss->set_vflip(ss, 1); // 0 = disable , 1 = enable - - Serial.printf("\nCamera started correctly, Type is %x (hex) of 9650, 7725, 2640, 3660, 5640\n\n", ss->id.PID); - - if (ss->id.PID == OV5640_PID ) { - //Serial.println("56 - going mirror"); - ss->set_hmirror(ss, 1); // 0 = disable , 1 = enable - } else { - ss->set_hmirror(ss, 0); // 0 = disable , 1 = enable - } - - ss->set_quality(ss, quality); - ss->set_framesize(ss, (framesize_t)framesize); - - ss->set_brightness(ss, 1); //up the blightness just a bit - ss->set_saturation(ss, -2); //lower the saturation - - delay(800); - for (int j = 0; j < 4; j++) { - camera_fb_t * fb = esp_camera_fb_get(); // get_good_jpeg(); - if (!fb) { - Serial.println("Camera Capture Failed"); - } else { - Serial.print("Pic, len="); Serial.print(fb->len); - Serial.printf(", new fb %X\n", (long)fb->buf); - esp_camera_fb_return(fb); - delay(50); - } - } -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// - - -static esp_err_t init_sdcard() -{ - - int succ = SD_MMC.begin("/sdcard", true); - if (succ) { - Serial.printf("SD_MMC Begin: %d\n", succ); - uint8_t cardType = SD_MMC.cardType(); - Serial.print("SD_MMC Card Type: "); - if (cardType == CARD_MMC) { - Serial.println("MMC"); - } else if (cardType == CARD_SD) { - Serial.println("SDSC"); - } else if (cardType == CARD_SDHC) { - Serial.println("SDHC"); - } else { - Serial.println("UNKNOWN"); - } - - uint64_t cardSize = SD_MMC.cardSize() / (1024 * 1024); - Serial.printf("SD_MMC Card Size: %lluMB\n", cardSize); - - } else { - Serial.printf("Failed to mount SD card VFAT filesystem. \n"); - Serial.println("Do you have an SD Card installed?"); - Serial.println("Check pin 12 and 13, not grounded, or grounded with 10k resistors!\n\n"); - major_fail(); - } - - return ESP_OK; -} - -void read_config_file() { - - // put a file "config.txt" onto SD card, to set parameters different from your hardcoded parameters - // it should look like this - one paramter per line, in the correct order, followed by 2 spaces, and any comments you choose - /* - desklens // camera name for files, mdns, etc - 11 // framesize 9=svga, 10=xga, 11=hd, 12=sxga, 13=uxga, 14=fhd, 17=qxga, 18=qhd, 21=qsxga - 8 // quality 0-63, lower the better, 10 good start, must be higher than "quality config" - 11 // framesize config - must be equal or higher than framesize - 5 / quality config - high q 0..5, med q 6..10, low q 11+ - 3 // buffers - 1 is half speed of 3, but you might run out od memory with 3 and framesize > uxga - 900 // length of video in seconds - 0 // interval - ms between frames - 0 for fastest, or 500 for 2fps, 10000 for 10 sec/frame - 1 // speedup - multiply framerate - 1 for realtime, 24 for record at 1fps, play at 24fps or24x - 0 // streamdelay - ms between streaming frames - 0 for fast as possible, 500 for 2fps - 4 // 0 no internet, 1 get time then shutoff, 2 streaming using wifiman, 3 for use ssid names below default off, 4 names below default on - MST7MDT,M3.2.0/2:00:00,M11.1.0/2:00:00 // timezone - this is mountain time, find timezone here https://sites.google.com/a/usapiens.com/opnode/time-zones - ssid1234 // ssid - mrpeanut // ssid password - - Lines above are rigid - do not delete lines, must have 2 spaces after the number or string - */ - - File config_file = SD_MMC.open("/config.txt", "r"); - if (!config_file) { - Serial.println("Failed to open config_file for reading"); - } else { - String junk; - Serial.println("Reading config.txt"); - String cname = config_file.readStringUntil(' '); - junk = config_file.readStringUntil('\n'); - int cframesize = config_file.parseInt(); - junk = config_file.readStringUntil('\n'); - int cquality = config_file.parseInt(); - junk = config_file.readStringUntil('\n'); - - int cframesizeconfig = config_file.parseInt(); - junk = config_file.readStringUntil('\n'); - int cqualityconfig = config_file.parseInt(); - junk = config_file.readStringUntil('\n'); - int cbuffersconfig = config_file.parseInt(); - junk = config_file.readStringUntil('\n'); - - int clength = config_file.parseInt(); - junk = config_file.readStringUntil('\n'); - int cinterval = config_file.parseInt(); - junk = config_file.readStringUntil('\n'); - int cspeedup = config_file.parseInt(); - junk = config_file.readStringUntil('\n'); - int cstreamdelay = config_file.parseInt(); - junk = config_file.readStringUntil('\n'); - int cinternet = config_file.parseInt(); - junk = config_file.readStringUntil('\n'); - String czone = config_file.readStringUntil(' '); - junk = config_file.readStringUntil('\n'); - cssid = config_file.readStringUntil(' '); - junk = config_file.readStringUntil('\n'); - cpass = config_file.readStringUntil(' '); - junk = config_file.readStringUntil('\n'); - config_file.close(); - - Serial.printf("========= Data fram config.txt =========\n"); - Serial.printf("Name %s\n", cname); logfile.printf("Name %s\n", cname); - Serial.printf("Framesize %d\n", cframesize); logfile.printf("Framesize %d\n", cframesize); - Serial.printf("Quality %d\n", cquality); logfile.printf("Quality %d\n", cquality); - Serial.printf("Framesize config %d\n", cframesizeconfig); logfile.printf("Framesize config%d\n", cframesizeconfig); - Serial.printf("Quality config %d\n", cqualityconfig); logfile.printf("Quality config%d\n", cqualityconfig); - Serial.printf("Buffers config %d\n", cbuffersconfig); logfile.printf("Buffers config %d\n", cbuffersconfig); - Serial.printf("Length %d\n", clength); logfile.printf("Length %d\n", clength); - Serial.printf("Interval %d\n", cinterval); logfile.printf("Interval %d\n", cinterval); - Serial.printf("Speedup %d\n", cspeedup); logfile.printf("Speedup %d\n", cspeedup); - Serial.printf("Streamdelay %d\n", cstreamdelay); logfile.printf("Streamdelay %d\n", cstreamdelay); - Serial.printf("Internet %d\n", cinternet); logfile.printf("Internet %d\n", cinternet); - //Serial.printf("Zone len %d, %s\n", czone.length(), czone); //logfile.printf("Zone len %d, %s\n", czone.length(), czone); - Serial.printf("Zone len %d\n", czone.length()); logfile.printf("Zone len %d\n", czone.length()); - Serial.printf("ssid %s\n", cssid); logfile.printf("ssid %s\n", cssid); - Serial.printf("pass %s\n", cpass); logfile.printf("pass %s\n", cpass); - - - framesize = cframesize; - quality = cquality; - framesizeconfig = cframesizeconfig; - qualityconfig = cqualityconfig; - buffersconfig = cbuffersconfig; - avi_length = clength; - frame_interval = cinterval; - speed_up_factor = cspeedup; - stream_delay = cstreamdelay; - IncludeInternet = cinternet; - configfile = true; - TIMEZONE = czone; - - cname.toCharArray(devname, cname.length() + 1); - } -} - - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// delete_old_stuff() - delete oldest files to free diskspace -// - -void listDir( const char * dirname, uint8_t levels) { - - Serial.printf("Listing directory: %s\n", "/"); - - File root = SD_MMC.open("/"); - if (!root) { - Serial.println("Failed to open directory"); - return; - } - if (!root.isDirectory()) { - Serial.println("Not a directory"); - return; - } - - File filex = root.openNextFile(); - while (filex) { - if (filex.isDirectory()) { - Serial.print(" DIR : "); - Serial.println(filex.name()); - if (levels) { - listDir( filex.name(), levels - 1); - } - } else { - Serial.print(" FILE: "); - Serial.print(filex.name()); - Serial.print(" SIZE: "); - Serial.println(filex.size()); - } - filex = root.openNextFile(); - } -} - -void delete_old_stuff() { - - Serial.printf("Total space: %lluMB\n", SD_MMC.totalBytes() / (1024 * 1024)); - Serial.printf("Used space: %lluMB\n", SD_MMC.usedBytes() / (1024 * 1024)); - - //listDir( "/", 0); - - float full = 1.0 * SD_MMC.usedBytes() / SD_MMC.totalBytes();; - if (full < 0.8) { - Serial.printf("Nothing deleted, %.1f%% disk full\n", 100.0 * full); - } else { - Serial.printf("Disk is %.1f%% full ... deleting oldest file\n", 100.0 * full); - while (full > 0.8) { - - double del_number = 999999999; - char del_numbername[50]; - - File f = SD_MMC.open("/"); - - File file = f.openNextFile(); - - while (file) { - //Serial.println(file.name()); - if (!file.isDirectory()) { - - char foldname[50]; - strcpy(foldname, file.name()); - for ( int x = 0; x < 50; x++) { - if ( (foldname[x] >= 0x30 && foldname[x] <= 0x39) || foldname[x] == 0x2E) { - } else { - if (foldname[x] != 0) foldname[x] = 0x20; - } - } - - double i = atof(foldname); - if ( i > 0 && i < del_number) { - strcpy (del_numbername, file.name()); - del_number = i; - } - //Serial.printf("Name is %s, number is %f\n", foldname, i); - } - file = f.openNextFile(); - - } - Serial.printf("lowest is Name is %s, number is %f\n", del_numbername, del_number); - if (del_number < 999999999) { - deleteFolderOrFile(del_numbername); - } - full = 1.0 * SD_MMC.usedBytes() / SD_MMC.totalBytes(); - Serial.printf("Disk is %.1f%% full ... \n", 100.0 * full); - f.close(); - } - } -} - -void deleteFolderOrFile(const char * val) { - // Function provided by user @gemi254 - Serial.printf("Deleting : %s\n", val); - File f = SD_MMC.open("/" + String(val)); - if (!f) { - Serial.printf("Failed to open %s\n", val); - return; - } - - if (f.isDirectory()) { - File file = f.openNextFile(); - while (file) { - if (file.isDirectory()) { - Serial.print(" DIR : "); - Serial.println(file.name()); - } else { - Serial.print(" FILE: "); - Serial.print(file.name()); - Serial.print(" SIZE: "); - Serial.print(file.size()); - if (SD_MMC.remove(file.name())) { - Serial.println(" deleted."); - } else { - Serial.println(" FAILED."); - } - } - file = f.openNextFile(); - } - f.close(); - //Remove the dir - if (SD_MMC.rmdir("/" + String(val))) { - Serial.printf("Dir %s removed\n", val); - } else { - Serial.println("Remove dir failed"); - } - - } else { - //Remove the file - if (SD_MMC.remove("/" + String(val))) { - Serial.printf("File %s deleted\n", val); - } else { - Serial.println("Delete failed"); - } - } -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// get_good_jpeg() - take a picture and make sure it has a good jpeg -// -camera_fb_t * get_good_jpeg() { - - camera_fb_t * fb; - - long start; - int failures = 0; - - do { - int fblen = 0; - int foundffd9 = 0; - long bp = millis(); - long mstart = micros(); - - fb = esp_camera_fb_get(); - if (!fb) { - Serial.println("Camera Capture Failed"); - failures++; - } else { - long mdelay = micros() - mstart; - - int get_fail = 0; - - totalp = totalp + millis() - bp; - time_in_camera = totalp; - - fblen = fb->len; - - for (int j = 1; j <= 1025; j++) { - if (fb->buf[fblen - j] != 0xD9) { - // no d9, try next for - } else { //Serial.println("Found a D9"); - if (fb->buf[fblen - j - 1] == 0xFF ) { //Serial.print("Found the FFD9, junk is "); Serial.println(j); - if (j == 1) { - normal_jpg++; - } else { - extend_jpg++; - } - foundffd9 = 1; - if (Lots_of_Stats) { - if (j > 900) { // rarely happens - sometimes on 2640 - Serial.print("Frame "); Serial.print(frame_cnt); logfile.print("Frame "); logfile.print(frame_cnt); - Serial.print(", Len = "); Serial.print(fblen); logfile.print(", Len = "); logfile.print(fblen); - //Serial.print(", Correct Len = "); Serial.print(fblen - j + 1); - Serial.print(", Extra Bytes = "); Serial.println( j - 1); logfile.print(", Extra Bytes = "); logfile.println( j - 1); - logfile.flush(); - } - - if ( frame_cnt % 100 == 50) { - Serial.printf("Frame %6d, len %6d, extra %4d, cam time %7d ", frame_cnt, fblen, j - 1, mdelay / 1000); - logfile.printf("Frame %6d, len %6d, extra %4d, cam time %7d ", frame_cnt, fblen, j - 1, mdelay / 1000); - do_it_now = 1; - } - } - break; - } - } - } - - if (!foundffd9) { - bad_jpg++; - Serial.printf("Bad jpeg, Frame %d, Len = %d \n", frame_cnt, fblen); - logfile.printf("Bad jpeg, Frame %d, Len = %d\n", frame_cnt, fblen); - - esp_camera_fb_return(fb); - failures++; - - } else { - break; - // count up the useless bytes - } - } - - } while (failures < 10); // normally leave the loop with a break() - - // if we get 10 bad frames in a row, then quality parameters are too high - set them lower (+5), and start new movie - if (failures == 10) { - Serial.printf("10 failures"); - logfile.printf("10 failures"); - logfile.flush(); - - sensor_t * ss = esp_camera_sensor_get(); - int qual = ss->status.quality ; - ss->set_quality(ss, qual + 5); - quality = qual + 5; - Serial.printf("\n\nDecreasing quality due to frame failures %d -> %d\n\n", qual, qual + 5); - logfile.printf("\n\nDecreasing quality due to frame failures %d -> %d\n\n", qual, qual + 5); - delay(1000); - - start_record = 0; - //reboot_now = true; - } - return fb; -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// eprom functions - increment the file_group, so files are always unique -// - -#include - -struct eprom_data { - int eprom_good; - int file_group; -}; - -void do_eprom_read() { - - eprom_data ed; - - EEPROM.begin(200); - EEPROM.get(0, ed); - - if (ed.eprom_good == MagicNumber) { - Serial.println("Good settings in the EPROM "); - file_group = ed.file_group; - file_group++; - Serial.print("New File Group "); Serial.println(file_group ); - } else { - Serial.println("No settings in EPROM - Starting with File Group 1 "); - file_group = 1; - } - do_eprom_write(); - file_number = 1; -} - -void do_eprom_write() { - - eprom_data ed; - ed.eprom_good = MagicNumber; - ed.file_group = file_group; - - Serial.println("Writing to EPROM ..."); - - EEPROM.begin(200); - EEPROM.put(0, ed); - EEPROM.commit(); - EEPROM.end(); -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// Make the avi functions -// -// start_avi() - open the file and write headers -// another_pic_avi() - write one more frame of movie -// end_avi() - write the final parameters and close the file - - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// start_avi - open the files and write in headers -// - -static void start_avi() { - - long start = millis(); - - Serial.println("Starting an avi "); - - sprintf(avi_file_name, "/%s%d.%03d.avi", devname, file_group, file_number); - - file_number++; - - avifile = SD_MMC.open(avi_file_name, "w"); - idxfile = SD_MMC.open("/idx.tmp", "w"); - - if (avifile) { - Serial.printf("File open: %s\n", avi_file_name); - logfile.printf("File open: %s\n", avi_file_name); - } else { - Serial.println("Could not open file"); - major_fail(); - } - - if (idxfile) { - //Serial.printf("File open: %s\n", "//idx.tmp"); - } else { - Serial.println("Could not open file /idx.tmp"); - major_fail(); - } - - for ( i = 0; i < AVIOFFSET; i++) { - char ch = pgm_read_byte(&avi_header[i]); - buf[i] = ch; - } - - memcpy(buf + 0x40, frameSizeData[framesize].frameWidth, 2); - memcpy(buf + 0xA8, frameSizeData[framesize].frameWidth, 2); - memcpy(buf + 0x44, frameSizeData[framesize].frameHeight, 2); - memcpy(buf + 0xAC, frameSizeData[framesize].frameHeight, 2); - - size_t err = avifile.write(buf, AVIOFFSET); - - avifile.seek( AVIOFFSET, SeekSet); - - Serial.print(F("\nRecording ")); - Serial.print(avi_length); - Serial.println(" seconds."); - - startms = millis(); - - totalp = 0; - totalw = 0; - - jpeg_size = 0; - movi_size = 0; - uVideoLen = 0; - idx_offset = 4; - - bad_jpg = 0; - extend_jpg = 0; - normal_jpg = 0; - - time_in_loop = 0; - time_in_camera = 0; - time_in_sd = 0; - time_in_good = 0; - time_total = 0; - time_in_web1 = 0; - time_in_web2 = 0; - delay_wait_for_sd = 0; - wait_for_cam = 0; - - time_in_sd += (millis() - start); - - logfile.flush(); - avifile.flush(); - -} // end of start avi - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// another_save_avi saves another frame to the avi file, uodates index -// -- pass in a fb pointer to the frame to add -// - -static void another_save_avi(camera_fb_t * fb ) { - - long start = millis(); - - int fblen; - fblen = fb->len; - - int fb_block_length; - uint8_t* fb_block_start; - - jpeg_size = fblen; - - remnant = (4 - (jpeg_size & 0x00000003)) & 0x00000003; - - long bw = millis(); - long frame_write_start = millis(); - - framebuffer_static[0] = 0x30; // "00dc" - framebuffer_static[1] = 0x30; - framebuffer_static[2] = 0x64; - framebuffer_static[3] = 0x63; - - int jpeg_size_rem = jpeg_size + remnant; - - framebuffer_static[4] = jpeg_size_rem % 0x100; - framebuffer_static[5] = (jpeg_size_rem >> 8) % 0x100; - framebuffer_static[6] = (jpeg_size_rem >> 16) % 0x100; - framebuffer_static[7] = (jpeg_size_rem >> 24) % 0x100; - - fb_block_start = fb->buf; - - if (fblen > fbs * 1024 - 8 ) { // fbs is the size of frame buffer static - fb_block_length = fbs * 1024; - fblen = fblen - (fbs * 1024 - 8); - memcpy(framebuffer_static + 8, fb_block_start, fb_block_length - 8); - fb_block_start = fb_block_start + fb_block_length - 8; - - } else { - fb_block_length = fblen + 8 + remnant; - memcpy(framebuffer_static + 8, fb_block_start, fblen); - fblen = 0; - } - - size_t err = avifile.write(framebuffer_static, fb_block_length); - - if (err != fb_block_length) { - Serial.print("Error on avi write: err = "); Serial.print(err); - Serial.print(" len = "); Serial.println(fb_block_length); - logfile.print("Error on avi write: err = "); logfile.print(err); - logfile.print(" len = "); logfile.println(fb_block_length); - } - - while (fblen > 0) { - - if (fblen > fbs * 1024) { - fb_block_length = fbs * 1024; - fblen = fblen - fb_block_length; - } else { - fb_block_length = fblen + remnant; - fblen = 0; - } - - memcpy(framebuffer_static, fb_block_start, fb_block_length); - - size_t err = avifile.write(framebuffer_static, fb_block_length); - - if (err != fb_block_length) { - Serial.print("Error on avi write: err = "); Serial.print(err); - Serial.print(" len = "); Serial.println(fb_block_length); - } - - fb_block_start = fb_block_start + fb_block_length; - delay(0); - } - - - movi_size += jpeg_size; - uVideoLen += jpeg_size; - long frame_write_end = millis(); - - print_2quartet(idx_offset, jpeg_size, idxfile); - - idx_offset = idx_offset + jpeg_size + remnant + 8; - - movi_size = movi_size + remnant; - - if ( do_it_now == 1) { - do_it_now = 0; - Serial.printf(" sd time %4d -- \n", millis() - bw); - logfile.printf(" sd time %4d -- \n", millis() - bw); - logfile.flush(); - } - - totalw = totalw + millis() - bw; - time_in_sd += (millis() - start); - - avifile.flush(); - - -} // end of another_pic_avi - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// end_avi writes the index, and closes the files -// - -static void end_avi() { - - long start = millis(); - - unsigned long current_end = avifile.position(); - - Serial.println("End of avi - closing the files"); - logfile.println("End of avi - closing the files"); - - if (frame_cnt < 5 ) { - Serial.println("Recording screwed up, less than 5 frames, forget index\n"); - idxfile.close(); - avifile.close(); - int xx = remove("/idx.tmp"); - int yy = remove(avi_file_name); - - } else { - - elapsedms = millis() - startms; - - float fRealFPS = (1000.0f * (float)frame_cnt) / ((float)elapsedms) * speed_up_factor; - - float fmicroseconds_per_frame = 1000000.0f / fRealFPS; - uint8_t iAttainedFPS = round(fRealFPS) ; - uint32_t us_per_frame = round(fmicroseconds_per_frame); - - //Modify the MJPEG header from the beginning of the file, overwriting various placeholders - - avifile.seek( 4 , SeekSet); - print_quartet(movi_size + 240 + 16 * frame_cnt + 8 * frame_cnt, avifile); - - avifile.seek( 0x20 , SeekSet); - print_quartet(us_per_frame, avifile); - - unsigned long max_bytes_per_sec = (1.0f * movi_size * iAttainedFPS) / frame_cnt; - - avifile.seek( 0x24 , SeekSet); - print_quartet(max_bytes_per_sec, avifile); - - avifile.seek( 0x30 , SeekSet); - print_quartet(frame_cnt, avifile); - - avifile.seek( 0x8c , SeekSet); - print_quartet(frame_cnt, avifile); - - avifile.seek( 0x84 , SeekSet); - print_quartet((int)iAttainedFPS, avifile); - - avifile.seek( 0xe8 , SeekSet); - print_quartet(movi_size + frame_cnt * 8 + 4, avifile); - - Serial.println(F("\n*** Video recorded and saved ***\n")); - - Serial.printf("Recorded %5d frames in %5d seconds\n", frame_cnt, elapsedms / 1000); - Serial.printf("File size is %u bytes\n", movi_size + 12 * frame_cnt + 4); - Serial.printf("Adjusted FPS is %5.2f\n", fRealFPS); - Serial.printf("Max data rate is %lu bytes/s\n", max_bytes_per_sec); - Serial.printf("Frame duration is %d us\n", us_per_frame); - Serial.printf("Average frame length is %d bytes\n", uVideoLen / frame_cnt); - Serial.print("Average picture time (ms) "); Serial.println( 1.0 * totalp / frame_cnt); - Serial.print("Average write time (ms) "); Serial.println( 1.0 * totalw / frame_cnt ); - Serial.print("Normal jpg % "); Serial.println( 100.0 * normal_jpg / frame_cnt, 1 ); - Serial.print("Extend jpg % "); Serial.println( 100.0 * extend_jpg / frame_cnt, 1 ); - Serial.print("Bad jpg % "); Serial.println( 100.0 * bad_jpg / frame_cnt, 5 ); - - Serial.printf("Writng the index, %d frames\n", frame_cnt); - - logfile.printf("Recorded %5d frames in %5d seconds\n", frame_cnt, elapsedms / 1000); - logfile.printf("File size is %u bytes\n", movi_size + 12 * frame_cnt + 4); - logfile.printf("Adjusted FPS is %5.2f\n", fRealFPS); - logfile.printf("Max data rate is %lu bytes/s\n", max_bytes_per_sec); - logfile.printf("Frame duration is %d us\n", us_per_frame); - logfile.printf("Average frame length is %d bytes\n", uVideoLen / frame_cnt); - logfile.print("Average picture time (ms) "); logfile.println( 1.0 * totalp / frame_cnt); - logfile.print("Average write time (ms) "); logfile.println( 1.0 * totalw / frame_cnt ); - logfile.print("Normal jpg % "); logfile.println( 100.0 * normal_jpg / frame_cnt, 1 ); - logfile.print("Extend jpg % "); logfile.println( 100.0 * extend_jpg / frame_cnt, 1 ); - logfile.print("Bad jpg % "); logfile.println( 100.0 * bad_jpg / frame_cnt, 5 ); - - logfile.printf("Writng the index, %d frames\n", frame_cnt); - - avifile.seek( current_end , SeekSet); - - idxfile.close(); - - size_t i1_err = avifile.write(idx1_buf, 4); - - print_quartet(frame_cnt * 16, avifile); - - idxfile = SD_MMC.open("/idx.tmp", "r"); - - if (idxfile) { - //Serial.printf("File open: %s\n", "//idx.tmp"); - //logfile.printf("File open: %s\n", "/idx.tmp"); - } else { - Serial.println("Could not open index file"); - logfile.println("Could not open index file"); - major_fail(); - } - - char * AteBytes; - AteBytes = (char*) malloc (8); - - for (int i = 0; i < frame_cnt; i++) { - size_t res = idxfile.readBytes( AteBytes, 8); - size_t i1_err = avifile.write(dc_buf, 4); - size_t i2_err = avifile.write(zero_buf, 4); - size_t i3_err = avifile.write((uint8_t *)AteBytes, 8); - } - - free(AteBytes); - - idxfile.close(); - avifile.close(); - - int xx = remove("/idx.tmp"); - } - - Serial.println("---"); logfile.println("---"); - - time_in_sd += (millis() - start); - - Serial.println(""); - time_total = millis() - startms; - Serial.printf("waiting for cam %10dms, %4.1f%%\n", wait_for_cam , 100.0 * wait_for_cam / time_total); - Serial.printf("Time in camera %10dms, %4.1f%%\n", time_in_camera, 100.0 * time_in_camera / time_total); - Serial.printf("waiting for sd %10dms, %4.1f%%\n", delay_wait_for_sd , 100.0 * delay_wait_for_sd / time_total); - Serial.printf("Time in sd %10dms, %4.1f%%\n", time_in_sd , 100.0 * time_in_sd / time_total); - Serial.printf("web (core 1) %10dms, %4.1f%%\n", time_in_web1 , 100.0 * time_in_web1 / time_total); - Serial.printf("web (core 0) %10dms, %4.1f%%\n", time_in_web2 , 100.0 * time_in_web2 / time_total); - Serial.printf("time total %10dms, %4.1f%%\n", time_total , 100.0 * time_total / time_total); - - logfile.printf("waiting for cam %10dms, %4.1f%%\n", wait_for_cam , 100.0 * wait_for_cam / time_total); - logfile.printf("Time in camera %10dms, %4.1f%%\n", time_in_camera, 100.0 * time_in_camera / time_total); - logfile.printf("waiting for sd %10dms, %4.1f%%\n", delay_wait_for_sd , 100.0 * delay_wait_for_sd / time_total); - logfile.printf("Time in sd %10dms, %4.1f%%\n", time_in_sd , 100.0 * time_in_sd / time_total); - logfile.printf("web (core 1) %10dms, %4.1f%%\n", time_in_web1 , 100.0 * time_in_web1 / time_total); - logfile.printf("web (core 0) %10dms, %4.1f%%\n", time_in_web2 , 100.0 * time_in_web2 / time_total); - logfile.printf("time total %10dms, %4.1f%%\n", time_total , 100.0 * time_total / time_total); - - logfile.flush(); - -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// Time -#include "time.h" - -// Workaround for the WebServer.h vs esp_http_server.h problem https://github.com/tzapu/WiFiManager/issues/1184 - -#define _HTTP_Method_H_ - -typedef enum { - jHTTP_GET = 0b00000001, - jHTTP_POST = 0b00000010, - jHTTP_DELETE = 0b00000100, - jHTTP_PUT = 0b00001000, - jHTTP_PATCH = 0b00010000, - jHTTP_HEAD = 0b00100000, - jHTTP_OPTIONS = 0b01000000, - jHTTP_ANY = 0b01111111, -} HTTPMethod; - -#include -#include -#include - -#include "ESPxWebFlMgr.h" //v56 -const word filemanagerport = 8080; -ESPxWebFlMgr filemgr(filemanagerport); // we want a different port than the webserver - - -time_t now; -struct tm timeinfo; -char localip[20]; -WiFiEventId_t eventID; - -bool init_wifi() -{ - int connAttempts = 0; - - uint32_t brown_reg_temp = READ_PERI_REG(RTC_CNTL_BROWN_OUT_REG); - WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0); - - if (IncludeInternet >= 3) { - - WiFi.disconnect(true, true); - WiFi.mode(WIFI_STA); - WiFi.setHostname(devname); - - char ssidch[20]; - char passch[20]; - cssid.toCharArray(ssidch, cssid.length() + 1); - cpass.toCharArray(passch, cpass.length() + 1); - Serial.printf("ssid >%s<, pass >%s<\n", ssidch, passch); - WiFi.begin(ssidch, passch); - - while (WiFi.status() != WL_CONNECTED ) { - delay(1000); - Serial.print("."); - if (connAttempts++ == 15) break; // try for 15 seconds to get internet, then give up - } - configTime(0, 0, "pool.ntp.org"); - char tzchar[60]; - //Serial.printf("Str >%s<, Char >%s<\n",TIMEZONE,tzchar); - TIMEZONE.toCharArray(tzchar, TIMEZONE.length()); // name of your camera for mDNS, Router, and filenames - setenv("TZ", tzchar, 1); // mountain time zone from #define at top - tzset(); - - time(&now); - - while (now < 15) { // try for 15 seconds to get the time, then give up - 10 seconds after boot - delay(1000); - Serial.print("o"); - time(&now); - } - - Serial.print("Local time: "); Serial.print(ctime(&now)); - sprintf(localip, "%s", WiFi.localIP().toString().c_str()); - Serial.print("IP: "); Serial.println(localip); Serial.println(" "); - InternetOff = false; - - if (!MDNS.begin(devname)) { - Serial.println("Error setting up MDNS responder!"); - } else { - Serial.printf("mDNS responder started '%s'\n", devname); - } - - eventID = WiFi.onEvent([](WiFiEvent_t event, WiFiEventInfo_t info) { - // info.disconnected.reason ==> info.wifi_sta_disconnected.reason - update with esp32_arduino 2.00 v58 - if (info.wifi_sta_disconnected.reason != 201) { - Serial.printf( "\nframe_cnt: %8d, WiFi event Reason: %d , Status: %d\n", frame_cnt, info.wifi_sta_disconnected.reason, WiFi.status()); - logfile.printf("\nframe_cnt: %8d, WiFi event Reason: %d , Status: %d\n", frame_cnt, info.wifi_sta_disconnected.reason, WiFi.status()); - } - }); - - } else { - - WiFiManager wm; - bool res; - wm.setHostname(devname); - //wm.resetSettings(); // for debugging - erase the ssid every time - - wm.setConnectTimeout(30); // how long to try to connect for before continuing - wm.setConfigPortalTimeout(60); // auto close configportal after n seconds - // res = wm.autoConnect(); // auto generated AP name from chipid - - res = wm.autoConnect("ESP32-CAM"); // use the devname defined above, with no password - //res = wm.autoConnect("AutoConnectAP","password"); // password protected ap - - if (res) { - Serial.println("Succesful Connection using WiFiManager"); - Serial.printf("\nInternet status: %d\n", WiFi.status()); - - eventID = WiFi.onEvent([](WiFiEvent_t event, WiFiEventInfo_t info) { - Serial.printf( "\nframe_cnt: %8d, WiFi event Reason: %d , Status: %d\n", frame_cnt, info.wifi_sta_disconnected.reason, WiFi.status()); - logfile.printf("\nframe_cnt: %8d, WiFi event Reason: %d , Status: %d\n", frame_cnt, info.wifi_sta_disconnected.reason, WiFi.status()); - - }); - - configTime(0, 0, "pool.ntp.org"); - char tzchar[60]; - TIMEZONE.toCharArray(tzchar, TIMEZONE.length()); // name of your camera for mDNS, Router, and filenames - setenv("TZ", tzchar, 1); // mountain time zone from #define at top - tzset(); - - time(&now); - - while (now < 15) { // try for 5 seconds to get the time, then give up - 10 seconds after boot - delay(1000); - Serial.print("o"); - time(&now); - } - - Serial.print("Local time: "); Serial.print(ctime(&now)); - sprintf(localip, "%s", WiFi.localIP().toString().c_str()); - Serial.print("IP: "); Serial.println(localip); Serial.println(" "); - InternetOff = false; - } else { - - InternetOff = true; - Serial.println("Internet failed using WiFiManager - not starting Web services"); - } - } - - //typedef enum { - // WIFI_PS_NONE, /**< No power save */ - // WIFI_PS_MIN_MODEM, /**< Minimum modem power saving. In this mode, station wakes up to receive beacon every DTIM period */ - // WIFI_PS_MAX_MODEM, /**< Maximum modem power saving. In this mode, interval to receive beacons is determined by the listen_interval - // parameter in wifi_sta_config_t. - // Attention: Using this option may cause ping failures. Not recommended */ - //} wifi_ps_type_t; - - wifi_ps_type_t the_type; - - esp_err_t get_ps = esp_wifi_get_ps(&the_type); - Serial.printf("The power save was: %d\n", the_type); - - Serial.printf("Set power save to %d\n", WIFI_PS_NONE); - esp_err_t set_ps = esp_wifi_set_ps(WIFI_PS_NONE); - - esp_err_t new_ps = esp_wifi_get_ps(&the_type); - Serial.printf("The power save is : %d\n", the_type); - - WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, brown_reg_temp); - return true; - -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// -#include - -httpd_handle_t camera_httpd = NULL; -char the_page[4000]; - -static esp_err_t capture_handler(httpd_req_t *req) { - - long start = millis(); - - camera_fb_t * fb = NULL; - esp_err_t res = ESP_OK; - char fname[100]; - int file_number = 0; - - //Serial.print("capture, core "); Serial.print(xPortGetCoreID()); - //Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL)); - - file_number++; - - sprintf(fname, "inline; filename=capture_%d.jpg", file_number); - - if (fb_next == NULL) { - fb = get_good_jpeg(); // esp_camera_fb_get(); - framebuffer_len = fb->len; - memcpy(framebuffer, fb->buf, framebuffer_len); - esp_camera_fb_return(fb); - } else { - fb = fb_next; - framebuffer_len = fb->len; - memcpy(framebuffer, fb->buf, framebuffer_len); - } - - httpd_resp_set_type(req, "image/jpeg"); - httpd_resp_set_hdr(req, "Content-Disposition", fname); - - res = httpd_resp_send(req, (const char *)framebuffer, framebuffer_len); - - time_in_web1 += (millis() - start); - return res; -} - - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// -static esp_err_t index_handler(httpd_req_t *req) { - - long start = millis(); - - Serial.print("http index, core "); Serial.print(xPortGetCoreID()); - Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL)); - - const char the_message[] = "Status"; - - time(&now); - const char *strdate = ctime(&now); - - int tot = SD_MMC.totalBytes() / (1024 * 1024); - int use = SD_MMC.usedBytes() / (1024 * 1024); - long rssi = WiFi.RSSI(); - - const char msg[] PROGMEM = R"rawliteral( - - - - -%s ESP32-CAM Video Recorder Junior - - -

%s
ESP32-CAM Video Recorder Junior %s
%s


- - Used / Total SD Space %d MB / %d MB
- Rssi %d
- - Filename: %s
- Framesize %d, Quality %d, Frame %d
- Avg framesize %d, fps %.1f
- Time left in current video %d seconds
-
-

http://%s/

-

Stream

-

Photos - 10 saveable photos every 3 seconds

-

File Manager - download, delete, edit

-

End recording, and reboot

- -)rawliteral"; - - - int time_left = (- millis() + (avi_start_time + avi_length * 1000)) / 1000; - - if (start_record == 0) { - time_left = 0; - } - - sprintf(the_page, msg, devname, devname, vernum, strdate, use, tot, rssi, avi_file_name, - framesize, quality, frame_cnt, most_recent_avg_framesize, most_recent_fps, time_left, - localip, localip, localip, localip, localip, filemanagerport, localip ); - - - httpd_resp_send(req, the_page, strlen(the_page)); - - time_in_web1 += (millis() - start); - return ESP_OK; -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// -static esp_err_t photos_handler(httpd_req_t *req) { - - long start = millis(); - - Serial.print("http photos, core "); Serial.print(xPortGetCoreID()); - Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL)); - //Serial.printf("Internal Total heap %d, internal Free Heap %d\n", ESP.getHeapSize(), ESP.getFreeHeap()); - //Serial.printf("SPIRam Total heap %d, SPIRam Free Heap %d\n", ESP.getPsramSize(), ESP.getFreePsram()); - - const char the_message[] = "Status"; - - time(&now); - const char *strdate = ctime(&now); - - const char msg[] PROGMEM = R"rawliteral( - - - - -%s ESP32-CAM Video Recorder Junior - - -

%s
ESP32-CAM Video Recorder Junior %s
%s


-
- One photo every 3 seconds for 30 seconds - roll forward or back - refresh for more live photos -
- -
-
- -)rawliteral"; - - sprintf(the_page, msg, devname, devname, vernum, strdate ); - - httpd_resp_send(req, the_page, strlen(the_page)); - time_in_web1 += (millis() - start); - return ESP_OK; -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// -static esp_err_t reboot_handler(httpd_req_t *req) { - - long start = millis(); - - Serial.print("http reboot, core "); Serial.print(xPortGetCoreID()); - Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL)); - //Serial.printf("Internal Total heap %d, internal Free Heap %d\n", ESP.getHeapSize(), ESP.getFreeHeap()); - //Serial.printf("SPIRam Total heap %d, SPIRam Free Heap %d\n", ESP.getPsramSize(), ESP.getFreePsram()); - - //start_record = 0; - reboot_now = true; - - const char the_message[] = "Status"; - - time(&now); - const char *strdate = ctime(&now); - - const char msg[] PROGMEM = R"rawliteral( - - - - -%s ESP32-CAM Video Recorder Junior - - -

%s
ESP32-CAM Video Recorder Junior %s
%s


-
- Ending current recording, and rebooting ... -
- -
- -)rawliteral"; - - sprintf(the_page, msg, devname, devname, vernum, strdate ); - - httpd_resp_send(req, the_page, strlen(the_page)); - time_in_web1 += (millis() - start); - - return ESP_OK; -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// -// Streaming stuff based on Random Nerd -// - -bool start_streaming = false; - -#define PART_BOUNDARY "123456789000000000000987654321" - -static const char* _STREAM_CONTENT_TYPE = "multipart/x-mixed-replace;boundary=" PART_BOUNDARY; -static const char* _STREAM_BOUNDARY = "\r\n--" PART_BOUNDARY "\r\n"; -static const char* _STREAM_PART = "Content-Type: image/jpeg\r\nContent-Length: %u\r\n\r\n"; - -void the_streaming_loop (void* pvParameter); - -static esp_err_t stream_handler(httpd_req_t *req) { - - long start = millis(); - - Serial.print("stream_handler, core "); Serial.print(xPortGetCoreID()); - Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL)); - - start_streaming = true; - - xTaskCreatePinnedToCore( the_streaming_loop, "the_streaming_loop", 8000, req, 1, &the_streaming_loop_task, 0); - - if ( the_streaming_loop_task == NULL ) { - //vTaskDelete( xHandle ); - Serial.printf("do_the_steaming_task failed to start! %d\n", the_streaming_loop_task); - } - - time_in_web1 += (millis() - start); - - while (start_streaming == true) { // we have to keep the *req alive - delay(1000); - //Serial.print("z"); - } - Serial.println(" streaming done"); - delay(500); - return ESP_OK; -} - -void the_streaming_loop (void* pvParameter) { - - httpd_req_t *req; - camera_fb_t * fb = NULL; - esp_err_t res = ESP_OK; - size_t _jpg_buf_len = 0; - uint8_t * _jpg_buf = NULL; - char * part_buf[64]; - - long start = millis(); - - Serial.print("\n\nlow prio stream_handler task, core "); Serial.print(xPortGetCoreID()); - Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL)); - - req = (httpd_req_t *) pvParameter; - - Serial.println("Starting the streaming"); - - res = httpd_resp_set_type(req, _STREAM_CONTENT_TYPE); - if (res != ESP_OK) { - Serial.printf("after first httpd_resp_set_type %d\n", res); - start_streaming = false; - } - - int streaming_frames = 0; - long streaming_start = millis(); - - while (true) { - streaming_frames++; - - if (fb_curr == NULL) { - fb = get_good_jpeg(); //esp_camera_fb_get(); - if (!fb) { - Serial.println("Stream - Camera Capture Failed"); - start_streaming = false; - } - framebuffer_len = fb->len; - memcpy(framebuffer, fb->buf, fb->len); - esp_camera_fb_return(fb); - - } else { - fb = fb_curr; - framebuffer_len = fb->len; - memcpy(framebuffer, fb->buf, fb->len); - } - - _jpg_buf_len = framebuffer_len; - _jpg_buf = framebuffer; - - size_t hlen = snprintf((char *)part_buf, 64, _STREAM_PART, _jpg_buf_len); - long send_time = millis(); - - res = httpd_resp_send_chunk(req, (const char *)part_buf, hlen); - if (res != ESP_OK) { - //Serial.printf("Stream error - 1st send chunk %d\n",res); - start_streaming = false; - } - - res = httpd_resp_send_chunk(req, (const char *)_jpg_buf, _jpg_buf_len); - if (res != ESP_OK) { - //Serial.printf("Stream error - 2nd send chunk %d\n",res); - start_streaming = false; - } - - res = httpd_resp_send_chunk(req, _STREAM_BOUNDARY, strlen(_STREAM_BOUNDARY)); - if (res != ESP_OK) { - //Serial.printf("Stream error - 3rd send chunk %d\n", res); - start_streaming = false; - } - - if (millis() - send_time > stream_delay) { - stream_delay = stream_delay * 1.5; - } - - time_in_web2 += (millis() - start); - - if (streaming_frames % 100 == 10) { - if (Lots_of_Stats) Serial.printf("Streaming at %3.3f fps\n", (float)1000 * streaming_frames / (millis() - streaming_start)); - } - - delay(stream_delay); - start = millis(); - - if (start_streaming == false) { - Serial.println("Deleting the streaming task"); - delay(100); - vTaskDelete(the_streaming_loop_task); - delay(5000); - } - } // stream forever -} - - -void startCameraServer() { - httpd_config_t config = HTTPD_DEFAULT_CONFIG(); - - Serial.print("http task prio: "); Serial.println(config.task_priority); - - httpd_uri_t index_uri = { - .uri = "/", - .method = HTTP_GET, - .handler = index_handler, - .user_ctx = NULL - }; - httpd_uri_t capture_uri = { - .uri = "/capture", - .method = HTTP_GET, - .handler = capture_handler, - .user_ctx = NULL - }; - httpd_uri_t stream_uri = { - .uri = "/stream", - .method = HTTP_GET, - .handler = stream_handler, - .user_ctx = NULL - }; - - httpd_uri_t photos_uri = { - .uri = "/photos", - .method = HTTP_GET, - .handler = photos_handler, - .user_ctx = NULL - }; - - httpd_uri_t reboot_uri = { - .uri = "/reboot", - .method = HTTP_GET, - .handler = reboot_handler, - .user_ctx = NULL - }; - - if (httpd_start(&camera_httpd, &config) == ESP_OK) { - httpd_register_uri_handler(camera_httpd, &index_uri); - httpd_register_uri_handler(camera_httpd, &capture_uri); - httpd_register_uri_handler(camera_httpd, &stream_uri); - httpd_register_uri_handler(camera_httpd, &photos_uri); - httpd_register_uri_handler(camera_httpd, &reboot_uri); - } - - Serial.println("Camera http started"); -} - -void stopCameraServer() { - httpd_stop(camera_httpd); -} - -void the_camera_loop (void* pvParameter); -void the_sd_loop (void* pvParameter); -void delete_old_stuff(); - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -void setup() { - - Serial.begin(115200); - Serial.println("\n\n---"); - - pinMode(33, OUTPUT); // little red led on back of chip - digitalWrite(33, LOW); // turn on the red LED on the back of chip - - pinMode(4, OUTPUT); // Blinding Disk-Avtive Light - digitalWrite(4, LOW); // turn off - - pinMode(12, INPUT_PULLUP); // pull this down to stop recording - pinMode(13, INPUT_PULLUP); // pull this down switch wifi - - //Serial.setDebugOutput(true); - - Serial.println(" "); - Serial.println("-------------------------------------"); - Serial.printf("ESP32-CAM-Video-Recorder-junior %s\n", vernum); - Serial.println("-------------------------------------"); - - Serial.print("setup, core "); Serial.print(xPortGetCoreID()); - Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL)); - - esp_reset_reason_t reason = esp_reset_reason(); - - logfile.print("--- reboot ------ because: "); - Serial.print("--- reboot ------ because: "); - - switch (reason) { - case ESP_RST_UNKNOWN : Serial.println("ESP_RST_UNKNOWN"); logfile.println("ESP_RST_UNKNOWN"); break; - case ESP_RST_POWERON : Serial.println("ESP_RST_POWERON"); logfile.println("ESP_RST_POWERON"); break; - case ESP_RST_EXT : Serial.println("ESP_RST_EXT"); logfile.println("ESP_RST_EXT"); break; - case ESP_RST_SW : Serial.println("ESP_RST_SW"); logfile.println("ESP_RST_SW"); break; - case ESP_RST_PANIC : Serial.println("ESP_RST_PANIC"); logfile.println("ESP_RST_PANIC"); break; - case ESP_RST_INT_WDT : Serial.println("ESP_RST_INT_WDT"); logfile.println("ESP_RST_INT_WDT"); break; - case ESP_RST_TASK_WDT : Serial.println("ESP_RST_TASK_WDT"); logfile.println("ESP_RST_TASK_WDT"); break; - case ESP_RST_WDT : Serial.println("ESP_RST_WDT"); logfile.println("ESP_RST_WDT"); break; - case ESP_RST_DEEPSLEEP : Serial.println("ESP_RST_DEEPSLEEP"); logfile.println("ESP_RST_DEEPSLEEP"); break; - case ESP_RST_BROWNOUT : Serial.println("ESP_RST_BROWNOUT"); logfile.println("ESP_RST_BROWNOUT"); break; - case ESP_RST_SDIO : Serial.println("ESP_RST_SDIO"); logfile.println("ESP_RST_SDIO"); break; - default : Serial.println("Reset resaon"); logfile.println("ESP ???"); break; - } - - //Serial.printf("Internal Total heap %d, internal Free Heap %d\n", ESP.getHeapSize(), ESP.getFreeHeap()); - //Serial.printf("SPIRam Total heap %d, SPIRam Free Heap %d\n", ESP.getPsramSize(), ESP.getFreePsram()); - - Serial.println("Reading the eprom ..."); - do_eprom_read(); - - // SD camera init - Serial.println("Mounting the SD card ..."); - esp_err_t card_err = init_sdcard(); - if (card_err != ESP_OK) { - Serial.printf("SD Card init failed with error 0x%x", card_err); - major_fail(); - return; - } - - devstr.toCharArray(devname, devstr.length()); // name of your camera for mDNS, Router, and filenames - - Serial.println("Try to get parameters from config.txt ..."); - read_config_file(); - - - char logname[50]; - sprintf(logname, "/%s%d.999.txt", devname, file_group); - Serial.printf("Creating logfile %s\n", logname); - logfile = SD_MMC.open(logname, FILE_WRITE); - - if (!logfile) { - Serial.println("Failed to open logfile for writing"); - } - if (IncludeInternet > 0) { - Serial.println("Starting the wifi ..."); - init_wifi(); - InternetOff = false; - } - - Serial.println("Setting up the camera ..."); - config_camera(); - - Serial.println("Checking SD for available space ..."); - delete_old_stuff(); - - digitalWrite(33, HIGH); // red light turns off when setup is complete - - if ( !InternetOff && IncludeInternet == 1) { - Serial.printf("Shutting off WiFi now \n\n"); - delay(1000); - WiFi.disconnect(); - InternetOff = true; - } - - if ( !InternetOff && IncludeInternet > 1) { - Serial.println("Starting Web Services ..."); - startCameraServer(); - } - - framebuffer = (uint8_t*)ps_malloc(1024 * 1024); // buffer to store a jpg in motion // needs to be larger for big frames from ov5640 - - Serial.println("Creating the_camera_loop_task"); - - wait_for_sd = xSemaphoreCreateBinary(); //xSemaphoreCreateMutex(); - sd_go = xSemaphoreCreateBinary(); //xSemaphoreCreateMutex(); - - // prio 3 - higher than the camera loop(), and the streaming - xTaskCreatePinnedToCore( the_camera_loop, "the_camera_loop", 3000, NULL, 6, &the_camera_loop_task, 0); // prio 3, core 0 //v56 core 1 as http dominating 0 ... back to 0, raise prio - - delay(100); - - // prio 4 - higher than the cam_loop(), and the streaming - xTaskCreatePinnedToCore( the_sd_loop, "the_sd_loop", 2000, NULL, 4, &the_sd_loop_task, 1); // prio 4, core 1 - - delay(200); - - boot_time = millis(); - - const char *strdate = ctime(&now); - logfile.println(strdate); - - filemgr.begin(); - filemgr.setBackGroundColor("Gray"); - Serial.print("Open Filemanager with http://"); - Serial.print(WiFi.localIP()); - Serial.print(":"); - Serial.print(filemanagerport); - Serial.print("/"); - Serial.println(); - Serial.println(" End of setup()\n\n"); -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// the_sd_loop() -// - -void the_sd_loop (void* pvParameter) { - - Serial.print("the_sd_loop, core "); Serial.print(xPortGetCoreID()); - Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL)); - - while (1) { - xSemaphoreTake( sd_go, portMAX_DELAY ); // we wait for camera loop to tell us to go - another_save_avi( fb_curr); // do the actual sd wrte - xSemaphoreGive( wait_for_sd ); // tell camera loop we are done - } -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// the_camera_loop() - -void the_camera_loop (void* pvParameter) { - - Serial.print("the camera loop, core "); Serial.print(xPortGetCoreID()); - Serial.print(", priority = "); Serial.println(uxTaskPriorityGet(NULL)); - - frame_cnt = 0; - start_record_2nd_opinion = digitalRead(12); - start_record_1st_opinion = digitalRead(12); - start_record = 0; - - delay(1000); - - while (1) { - - // if (frame_cnt == 0 && start_record == 0) // do nothing - // if (frame_cnt == 0 && start_record == 1) // start a movie - // if (frame_cnt > 0 && start_record == 0) // stop the movie - // if (frame_cnt > 0 && start_record != 0) // another frame - - /////////////////// NOTHING TO DO ////////////////// - if (frame_cnt == 0 && start_record == 0) { - - // Serial.println("Do nothing"); - if (we_are_already_stopped == 0) Serial.println("\n\nDisconnect Pin 12 from GND to start recording.\n\n"); - we_are_already_stopped = 1; - delay(100); - - /////////////////// START A MOVIE ////////////////// - } else if (frame_cnt == 0 && start_record == 1) { - - //Serial.println("Ready to start"); - - we_are_already_stopped = 0; - - //delete_old_stuff(); // move to loop - - avi_start_time = millis(); - Serial.printf("\nStart the avi ... at %d\n", avi_start_time); - Serial.printf("Framesize %d, quality %d, length %d seconds\n\n", framesize, quality, avi_length); - logfile.printf("\nStart the avi ... at %d\n", avi_start_time); - logfile.printf("Framesize %d, quality %d, length %d seconds\n\n", framesize, quality, avi_length); - logfile.flush(); - - frame_cnt++; - - long wait_for_cam_start = millis(); - fb_curr = get_good_jpeg(); // should take zero time - wait_for_cam += millis() - wait_for_cam_start; - - start_avi(); - - wait_for_cam_start = millis(); - fb_next = get_good_jpeg(); // should take nearly zero time due to time spent writing header - wait_for_cam += millis() - wait_for_cam_start; - xSemaphoreGive( sd_go ); // trigger sd write to write first frame - - digitalWrite(33, frame_cnt % 2); // blink - - /////////////////// END THE MOVIE ////////////////// - } else if ( reboot_now || (frame_cnt > 0 && start_record == 0) || millis() > (avi_start_time + avi_length * 1000)) { // end the avi - - Serial.println("End the Avi"); - - xSemaphoreTake( wait_for_sd, portMAX_DELAY ); - esp_camera_fb_return(fb_curr); - - frame_cnt++; - fb_curr = fb_next; - fb_next = NULL; - - xSemaphoreGive( sd_go ); // save final frame of movie - - digitalWrite(33, frame_cnt % 2); - - xSemaphoreTake( wait_for_sd, portMAX_DELAY ); // wait for final frame of movie to be written - - esp_camera_fb_return(fb_curr); - fb_curr = NULL; - - end_avi(); // end the movie - - digitalWrite(33, HIGH); // light off - - avi_end_time = millis(); - - float fps = 1.0 * frame_cnt / ((avi_end_time - avi_start_time) / 1000) ; - - Serial.printf("End the avi at %d. It was %d frames, %d ms at %.2f fps...\n", millis(), frame_cnt, avi_end_time, avi_end_time - avi_start_time, fps); - logfile.printf("End the avi at %d. It was %d frames, %d ms at %.2f fps...\n", millis(), frame_cnt, avi_end_time, avi_end_time - avi_start_time, fps); - - if (!reboot_now) frame_cnt = 0; // start recording again on the next loop - - /////////////////// ANOTHER FRAME ////////////////// - } else if (frame_cnt > 0 && start_record != 0) { // another frame of the avi - - //Serial.println("Another frame"); - - current_frame_time = millis(); - if (current_frame_time - last_frame_time < frame_interval) { - delay(frame_interval - (current_frame_time - last_frame_time)); // delay for timelapse - } - last_frame_time = millis(); - - frame_cnt++; - - long delay_wait_for_sd_start = millis(); - xSemaphoreTake( wait_for_sd, portMAX_DELAY ); // make sure sd writer is done - delay_wait_for_sd += millis() - delay_wait_for_sd_start; - - esp_camera_fb_return(fb_curr); - - fb_curr = fb_next; // we will write a frame, and get the camera preparing a new one - - xSemaphoreGive( sd_go ); // write the frame in fb_curr - - long wait_for_cam_start = millis(); - fb_next = get_good_jpeg(); // should take near zero, unless the sd is faster than the camera, when we will have to wait for the camera - wait_for_cam += millis() - wait_for_cam_start; - - digitalWrite(33, frame_cnt % 2); - - if (frame_cnt % 100 == 10 ) { // print some status every 100 frames - if (frame_cnt == 10) { - bytes_before_last_100_frames = movi_size; - time_before_last_100_frames = millis(); - most_recent_fps = 0; - most_recent_avg_framesize = 0; - } else { - - most_recent_fps = 100.0 / ((millis() - time_before_last_100_frames) / 1000.0) ; - most_recent_avg_framesize = (movi_size - bytes_before_last_100_frames) / 100; - - if (Lots_of_Stats) { - Serial.printf("So far: %04d frames, in %6.1f seconds, for last 100 frames: avg frame size %6.1f kb, %.2f fps ...\n", frame_cnt, 0.001 * (millis() - avi_start_time), 1.0 / 1024 * most_recent_avg_framesize, most_recent_fps); - logfile.printf("So far: %04d frames, in %6.1f seconds, for last 100 frames: avg frame size %6.1f kb, %.2f fps ...\n", frame_cnt, 0.001 * (millis() - avi_start_time), 1.0 / 1024 * most_recent_avg_framesize, most_recent_fps); - } - - total_delay = 0; - - bytes_before_last_100_frames = movi_size; - time_before_last_100_frames = millis(); - } - } - } - } -} - -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -// loop() - loop runs at low prio, so I had to move it to the task the_camera_loop at higher priority -long next_delete = 1000; - -void loop() { - long run_time = millis() - boot_time; - - if ( millis() > next_delete){ - next_delete = millis() + (15 * 60 * 1000); - delete_old_stuff(); - } - start_record_2nd_opinion = start_record_1st_opinion; - start_record_1st_opinion = digitalRead(12); - - if (start_record_1st_opinion == start_record_2nd_opinion ) { - if (start_record_1st_opinion > 0 ) start_record = 1; - else start_record = 0; - } - - int read13 = digitalRead(13); - delay(20); - read13 = read13 + digitalRead(13); // get 2 opinions to help poor soldering - - if (IncludeInternet == 4 || IncludeInternet == 2) { // 4 is oppoiste of 3, so, flip read13 - if (read13 > 0) { - read13 = 0; - } else { - read13 = 2; - } - } - - if (IncludeInternet > 1) { - if (read13 == 2 && !InternetOff) { - Serial.println("Shutting off wifi ..."); logfile.println("Shutting off wifi ..."); - stopCameraServer(); - WiFiManager wm; - wm.disconnect(); - InternetOff = true; - } - if (read13 == 0 && InternetOff) { - Serial.println("Starting the wifi ..."); logfile.println("Starting the wifi ..."); - init_wifi(); - Serial.println("Starting Web Services ..."); - startCameraServer(); - InternetOff = false; - } - } - - if (reboot_now == true) { - Serial.println(" \n\n\n Rebooting ... \n\n\n"); - delay(2000); - ESP.restart(); - } - - filemgr.handleClient(); //v56 - delay(200); - -}