kopia lustrzana https://gitlab.com/Teuniz/DSRemote
1167 wiersze
34 KiB
C++
1167 wiersze
34 KiB
C++
/*
|
|
***************************************************************************
|
|
*
|
|
* Author: Teunis van Beelen
|
|
*
|
|
* Copyright (C) 2016 - 2025 Teunis van Beelen
|
|
*
|
|
* Email: teuniz@protonmail.com
|
|
*
|
|
***************************************************************************
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
***************************************************************************
|
|
*
|
|
* RS-232 protocol:
|
|
*
|
|
* settings in this example: 8N1
|
|
*
|
|
* character value in this example: 'G', 71, 0x47, 0b01000111
|
|
*
|
|
*
|
|
*
|
|
* idle start 1 1 1 0 0 0 1 0 stop idle
|
|
* bit bit
|
|
* -------------------------+ +-----+-----+-----+ +-----+ +-----+-----------------------------
|
|
* +12V | | | | | |
|
|
* | | | | | |
|
|
* | | | | | |
|
|
* | | | | | |
|
|
* -12V +-----+ +-----+-----+-----+ +-----+
|
|
*
|
|
* 0 1 2 3 4 5 6 7
|
|
*
|
|
* LSB MSB
|
|
*
|
|
*
|
|
* default (positive )line RS-232 LSB first (little endian)
|
|
*
|
|
* negative: everything inverted, used by microcontrollers, TTL/CMOS level
|
|
*
|
|
***************************************************************************
|
|
*/
|
|
|
|
|
|
|
|
|
|
void UI_Mainwindow::serial_decoder(struct device_settings *d_parms)
|
|
{
|
|
int i, j,
|
|
threshold[MAX_CHNS],
|
|
uart_tx_start,
|
|
uart_tx_data_bit,
|
|
uart_rx_start,
|
|
uart_rx_data_bit,
|
|
uart_parity_bit,
|
|
uart_parity,
|
|
spi_data_mosi_bit,
|
|
spi_data_miso_bit,
|
|
spi_mosi_bit0_pos=0,
|
|
spi_miso_bit0_pos=0,
|
|
spi_clk_new,
|
|
spi_clk_old,
|
|
spi_chars=1,
|
|
spi_timeout,
|
|
spi_timeout_cntr,
|
|
stop_bit_error;
|
|
|
|
unsigned int uart_val=0,
|
|
spi_mosi_val=0,
|
|
spi_miso_val=0;
|
|
|
|
short s_max, s_min;
|
|
|
|
double uart_sample_per_bit,
|
|
uart_tx_x_pos,
|
|
uart_rx_x_pos,
|
|
bit_per_volt;
|
|
|
|
d_parms->math_decode_uart_tx_nval = 0;
|
|
|
|
d_parms->math_decode_uart_rx_nval = 0;
|
|
|
|
d_parms->math_decode_spi_mosi_nval = 0;
|
|
|
|
d_parms->math_decode_spi_miso_nval = 0;
|
|
|
|
if(d_parms->wavebufsz < 32) return;
|
|
|
|
if(d_parms->math_decode_threshold_auto)
|
|
{
|
|
for(j=0; j<MAX_CHNS; j++)
|
|
{
|
|
if(!d_parms->chandisplay[j]) continue;
|
|
|
|
s_max = -32768;
|
|
s_min = 32767;
|
|
|
|
for(i=0; i<d_parms->wavebufsz; i++)
|
|
{
|
|
if(d_parms->wavebuf[j][i] > s_max) s_max = d_parms->wavebuf[j][i];
|
|
if(d_parms->wavebuf[j][i] < s_min) s_min = d_parms->wavebuf[j][i];
|
|
}
|
|
|
|
threshold[j] = (s_max + s_min) / 2;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if(d_parms->math_decode_mode == DECODE_MODE_UART)
|
|
{
|
|
if(d_parms->math_decode_uart_tx)
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
bit_per_volt = 32.0 / d_parms->chanscale[d_parms->math_decode_uart_tx - 1];
|
|
|
|
threshold[d_parms->math_decode_uart_tx - 1] =
|
|
(d_parms->math_decode_threshold_uart_tx +
|
|
d_parms->chanoffset[d_parms->math_decode_uart_tx - 1])
|
|
* bit_per_volt;
|
|
}
|
|
else
|
|
{
|
|
bit_per_volt = 25.0 / d_parms->chanscale[d_parms->math_decode_uart_tx - 1];
|
|
|
|
threshold[d_parms->math_decode_uart_tx - 1] =
|
|
(d_parms->math_decode_threshold[d_parms->math_decode_uart_tx - 1] +
|
|
d_parms->chanoffset[d_parms->math_decode_uart_tx - 1])
|
|
* bit_per_volt;
|
|
}
|
|
}
|
|
|
|
if(d_parms->math_decode_uart_rx)
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
bit_per_volt = 32.0 / d_parms->chanscale[d_parms->math_decode_uart_rx - 1];
|
|
|
|
threshold[d_parms->math_decode_uart_rx - 1] =
|
|
(d_parms->math_decode_threshold_uart_rx +
|
|
d_parms->chanoffset[d_parms->math_decode_uart_rx - 1])
|
|
* bit_per_volt;
|
|
}
|
|
else
|
|
{
|
|
bit_per_volt = 25.0 / d_parms->chanscale[d_parms->math_decode_uart_rx - 1];
|
|
|
|
threshold[d_parms->math_decode_uart_rx - 1] =
|
|
(d_parms->math_decode_threshold[d_parms->math_decode_uart_rx - 1] +
|
|
d_parms->chanoffset[d_parms->math_decode_uart_rx - 1])
|
|
* bit_per_volt;
|
|
}
|
|
}
|
|
}
|
|
else if(d_parms->math_decode_mode == DECODE_MODE_SPI)
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
bit_per_volt = 32.0 / d_parms->chanscale[d_parms->math_decode_spi_clk];
|
|
|
|
threshold[d_parms->math_decode_spi_clk] =
|
|
(d_parms->math_decode_threshold[2] +
|
|
d_parms->chanoffset[d_parms->math_decode_spi_clk])
|
|
* bit_per_volt;
|
|
}
|
|
else
|
|
{
|
|
bit_per_volt = 25.0 / d_parms->chanscale[d_parms->math_decode_spi_clk];
|
|
|
|
threshold[d_parms->math_decode_spi_clk] =
|
|
(d_parms->math_decode_threshold[d_parms->math_decode_spi_clk] +
|
|
d_parms->chanoffset[d_parms->math_decode_spi_clk])
|
|
* bit_per_volt;
|
|
}
|
|
|
|
if(d_parms->math_decode_spi_mosi)
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
bit_per_volt = 32.0 / d_parms->chanscale[d_parms->math_decode_spi_mosi - 1];
|
|
|
|
threshold[d_parms->math_decode_spi_mosi - 1] =
|
|
(d_parms->math_decode_threshold[1] +
|
|
d_parms->chanoffset[d_parms->math_decode_spi_mosi - 1])
|
|
* bit_per_volt;
|
|
}
|
|
else
|
|
{
|
|
bit_per_volt = 25.0 / d_parms->chanscale[d_parms->math_decode_spi_mosi - 1];
|
|
|
|
threshold[d_parms->math_decode_spi_mosi - 1] =
|
|
(d_parms->math_decode_threshold[d_parms->math_decode_spi_mosi - 1] +
|
|
d_parms->chanoffset[d_parms->math_decode_spi_mosi - 1])
|
|
* bit_per_volt;
|
|
}
|
|
}
|
|
|
|
if(d_parms->math_decode_spi_miso)
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
bit_per_volt = 32.0 / d_parms->chanscale[d_parms->math_decode_spi_miso - 1];
|
|
|
|
threshold[d_parms->math_decode_spi_miso - 1] =
|
|
(d_parms->math_decode_threshold[0] +
|
|
d_parms->chanoffset[d_parms->math_decode_spi_miso -1])
|
|
* bit_per_volt;
|
|
}
|
|
else
|
|
{
|
|
bit_per_volt = 25.0 / d_parms->chanscale[d_parms->math_decode_spi_miso - 1];
|
|
|
|
threshold[d_parms->math_decode_spi_miso - 1] =
|
|
(d_parms->math_decode_threshold[d_parms->math_decode_spi_miso - 1] +
|
|
d_parms->chanoffset[d_parms->math_decode_spi_miso -1])
|
|
* bit_per_volt;
|
|
}
|
|
}
|
|
|
|
if(d_parms->math_decode_spi_cs)
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
bit_per_volt = 32.0 / d_parms->chanscale[d_parms->math_decode_spi_cs - 1];
|
|
|
|
threshold[d_parms->math_decode_spi_cs - 1] =
|
|
(d_parms->math_decode_threshold[3] +
|
|
d_parms->chanoffset[d_parms->math_decode_spi_cs - 1])
|
|
* bit_per_volt;
|
|
}
|
|
else
|
|
{
|
|
bit_per_volt = 25.0 / d_parms->chanscale[d_parms->math_decode_spi_cs - 1];
|
|
|
|
threshold[d_parms->math_decode_spi_cs - 1] =
|
|
(d_parms->math_decode_threshold[d_parms->math_decode_spi_cs - 1] +
|
|
d_parms->chanoffset[d_parms->math_decode_spi_cs - 1])
|
|
* bit_per_volt;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if(d_parms->math_decode_mode == DECODE_MODE_UART)
|
|
{
|
|
d_parms->math_decode_uart_tx_nval = 0;
|
|
|
|
d_parms->math_decode_uart_rx_nval = 0;
|
|
|
|
if(d_parms->wave_mem_view_enabled)
|
|
{
|
|
uart_sample_per_bit = d_parms->samplerate / (double)d_parms->math_decode_uart_baud;
|
|
}
|
|
else
|
|
{
|
|
if(d_parms->timebasedelayenable)
|
|
{
|
|
uart_sample_per_bit = (100.0 / d_parms->timebasedelayscale) / (double)d_parms->math_decode_uart_baud;
|
|
}
|
|
else
|
|
{
|
|
uart_sample_per_bit = (100.0 / d_parms->timebasescale) / (double)d_parms->math_decode_uart_baud;
|
|
}
|
|
}
|
|
|
|
if(uart_sample_per_bit < 3) return;
|
|
|
|
uart_tx_start = 0;
|
|
|
|
uart_tx_data_bit = 0;
|
|
|
|
uart_tx_x_pos = 1;
|
|
|
|
uart_rx_start = 0;
|
|
|
|
uart_rx_data_bit = 0;
|
|
|
|
uart_rx_x_pos = 1;
|
|
|
|
// if(d_parms->modelserie == 6)
|
|
// {
|
|
// printf("chanscale: %f\n"
|
|
// "chanoffset: %f\n"
|
|
// "math_decode_threshold_uart_tx: %f\n"
|
|
// "math_decode_uart_tx: %i\n"
|
|
// "threshold: %i\n"
|
|
// "uart_sample_per_bit: %f\n"
|
|
// "wavebufsz: %i\n",
|
|
// d_parms->chanscale[d_parms->math_decode_uart_tx - 1],
|
|
// d_parms->chanoffset[d_parms->math_decode_uart_tx - 1],
|
|
// d_parms->math_decode_threshold_uart_tx,
|
|
// d_parms->math_decode_uart_tx,
|
|
// threshold[d_parms->math_decode_uart_tx - 1],
|
|
// uart_sample_per_bit,
|
|
// d_parms->wavebufsz);
|
|
// }
|
|
// else
|
|
// {
|
|
//
|
|
// printf("chanscale: %f\n"
|
|
// "chanoffset: %f\n"
|
|
// "math_decode_threshold: %f\n"
|
|
// "math_decode_uart_tx: %i\n"
|
|
// "threshold: %i\n"
|
|
// "uart_sample_per_bit: %f\n"
|
|
// "wavebufsz: %i\n",
|
|
// d_parms->chanscale[d_parms->math_decode_uart_tx - 1],
|
|
// d_parms->chanoffset[d_parms->math_decode_uart_tx - 1],
|
|
// d_parms->math_decode_threshold[d_parms->math_decode_uart_tx - 1],
|
|
// d_parms->math_decode_uart_tx,
|
|
// threshold[d_parms->math_decode_uart_tx - 1],
|
|
// uart_sample_per_bit,
|
|
// d_parms->wavebufsz);
|
|
// }
|
|
|
|
if(d_parms->math_decode_uart_tx)
|
|
{
|
|
if(d_parms->chandisplay[d_parms->math_decode_uart_tx - 1]) // don't try to decode if channel isn't enabled...
|
|
{
|
|
for(i=1; i<d_parms->wavebufsz; i++)
|
|
{
|
|
if(d_parms->math_decode_uart_tx_nval >= DECODE_MAX_CHARS)
|
|
{
|
|
break;
|
|
}
|
|
|
|
if(!uart_tx_start)
|
|
{
|
|
if(d_parms->math_decode_uart_pol) // positive, line level RS-232
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i-1] >= d_parms->math_decode_threshold_uart_tx)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i] < d_parms->math_decode_threshold_uart_tx)
|
|
{
|
|
uart_tx_start = 1;
|
|
|
|
uart_val = 0;
|
|
|
|
uart_tx_x_pos = (uart_sample_per_bit * 1.5) + i;
|
|
|
|
i = uart_tx_x_pos - 1;
|
|
}
|
|
}
|
|
}
|
|
else // modelserie = 1, 2 or 4
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i-1] >= threshold[d_parms->math_decode_uart_tx - 1])
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i] < threshold[d_parms->math_decode_uart_tx - 1])
|
|
{
|
|
uart_tx_start = 1;
|
|
|
|
uart_val = 0;
|
|
|
|
uart_tx_x_pos = (uart_sample_per_bit * 1.5) + i;
|
|
|
|
i = uart_tx_x_pos - 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else // negative, cpu level TTL/CMOS
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i-1] < d_parms->math_decode_threshold_uart_tx)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i] >= d_parms->math_decode_threshold_uart_tx)
|
|
{
|
|
uart_tx_start = 1;
|
|
|
|
uart_val = 0;
|
|
|
|
uart_tx_x_pos = (uart_sample_per_bit * 1.5) + i;
|
|
|
|
i = uart_tx_x_pos - 1;
|
|
}
|
|
}
|
|
}
|
|
else // modelserie = 1, 2 or 4
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i-1] < threshold[d_parms->math_decode_uart_tx - 1])
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i] >= threshold[d_parms->math_decode_uart_tx - 1])
|
|
{
|
|
uart_tx_start = 1;
|
|
|
|
uart_val = 0;
|
|
|
|
uart_tx_x_pos = (uart_sample_per_bit * 1.5) + i;
|
|
|
|
i = uart_tx_x_pos - 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else // uart_rx_start != 0
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i] >= d_parms->math_decode_threshold_uart_tx)
|
|
{
|
|
uart_val += (1 << uart_tx_data_bit);
|
|
}
|
|
}
|
|
else // modelserie = 1, 2 or 4
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i] >= threshold[d_parms->math_decode_uart_tx - 1])
|
|
{
|
|
uart_val += (1 << uart_tx_data_bit);
|
|
}
|
|
}
|
|
|
|
if(++uart_tx_data_bit == d_parms->math_decode_uart_width)
|
|
{
|
|
if((d_parms->math_decode_uart_end) && (d_parms->math_decode_format != 4)) // big endian?
|
|
{
|
|
uart_val = reverse_bitorder_8(uart_val);
|
|
|
|
uart_val >>= (8 - uart_tx_data_bit);
|
|
}
|
|
|
|
if(!d_parms->math_decode_uart_pol) // positive, line level RS-232 or negative, cpu level TTL/CMOS?
|
|
{
|
|
uart_val = ~uart_val;
|
|
|
|
uart_val &= (0xff >> (8 - uart_tx_data_bit));
|
|
}
|
|
|
|
d_parms->math_decode_uart_tx_val[d_parms->math_decode_uart_tx_nval] = uart_val;
|
|
|
|
d_parms->math_decode_uart_tx_val_pos[d_parms->math_decode_uart_tx_nval] =
|
|
i - (uart_tx_data_bit * uart_sample_per_bit) + (0.5 * uart_sample_per_bit);
|
|
|
|
uart_tx_data_bit = 0;
|
|
|
|
uart_tx_start = 0;
|
|
|
|
d_parms->math_decode_uart_tx_err[d_parms->math_decode_uart_tx_nval] = 0;
|
|
|
|
if(d_parms->math_decode_uart_par)
|
|
{
|
|
uart_tx_x_pos += uart_sample_per_bit;
|
|
|
|
i = uart_tx_x_pos;
|
|
|
|
if(i < d_parms->wavebufsz)
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i] >= d_parms->math_decode_threshold_uart_tx)
|
|
{
|
|
if(d_parms->math_decode_uart_pol)
|
|
{
|
|
uart_parity_bit = 1;
|
|
}
|
|
else
|
|
{
|
|
uart_parity_bit = 0;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if(d_parms->math_decode_uart_pol)
|
|
{
|
|
uart_parity_bit = 0;
|
|
}
|
|
else
|
|
{
|
|
uart_parity_bit = 1;
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i] >= threshold[d_parms->math_decode_uart_tx - 1])
|
|
{
|
|
if(d_parms->math_decode_uart_pol)
|
|
{
|
|
uart_parity_bit = 1;
|
|
}
|
|
else
|
|
{
|
|
uart_parity_bit = 0;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if(d_parms->math_decode_uart_pol)
|
|
{
|
|
uart_parity_bit = 0;
|
|
}
|
|
else
|
|
{
|
|
uart_parity_bit = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
for(j=0, uart_parity=0; j<d_parms->math_decode_uart_width; j++)
|
|
{
|
|
uart_parity += ((uart_val >> j) & 1);
|
|
}
|
|
|
|
if(d_parms->math_decode_uart_par & 1)
|
|
{
|
|
uart_parity++;
|
|
}
|
|
|
|
if((uart_parity & 1) != uart_parity_bit)
|
|
{
|
|
d_parms->math_decode_uart_tx_err[d_parms->math_decode_uart_tx_nval] = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
uart_tx_x_pos += uart_sample_per_bit;
|
|
|
|
i = uart_tx_x_pos;
|
|
|
|
stop_bit_error = 0; // check stop bit
|
|
|
|
if(i < d_parms->wavebufsz)
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i] >= d_parms->math_decode_threshold_uart_tx)
|
|
{
|
|
stop_bit_error = 1;
|
|
}
|
|
}
|
|
else // modelserie = 1, 2 or 4
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_tx - 1][i] >= threshold[d_parms->math_decode_uart_tx - 1])
|
|
{
|
|
stop_bit_error = 1;
|
|
}
|
|
}
|
|
|
|
if(d_parms->math_decode_uart_pol)
|
|
{
|
|
if(stop_bit_error)
|
|
{
|
|
stop_bit_error = 0;
|
|
}
|
|
else
|
|
{
|
|
stop_bit_error = 1;
|
|
}
|
|
}
|
|
|
|
if(stop_bit_error)
|
|
{
|
|
d_parms->math_decode_uart_tx_err[d_parms->math_decode_uart_tx_nval] = 1;
|
|
}
|
|
}
|
|
|
|
if(d_parms->math_decode_uart_stop == 1)
|
|
{
|
|
uart_tx_x_pos += uart_sample_per_bit / 2;
|
|
}
|
|
else if(d_parms->math_decode_uart_stop == 2)
|
|
{
|
|
uart_tx_x_pos += uart_sample_per_bit;
|
|
}
|
|
|
|
i = uart_tx_x_pos - 1;
|
|
|
|
d_parms->math_decode_uart_tx_nval++;
|
|
}
|
|
else
|
|
{
|
|
uart_tx_x_pos += uart_sample_per_bit;
|
|
|
|
i = uart_tx_x_pos - 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if(d_parms->math_decode_uart_rx)
|
|
{
|
|
if(d_parms->chandisplay[d_parms->math_decode_uart_rx - 1]) // don't try to decode if channel isn't enabled...
|
|
{
|
|
for(i=1; i<d_parms->wavebufsz; i++)
|
|
{
|
|
if(d_parms->math_decode_uart_rx_nval >= DECODE_MAX_CHARS)
|
|
{
|
|
break;
|
|
}
|
|
|
|
if(!uart_rx_start)
|
|
{
|
|
if(d_parms->math_decode_uart_pol) // positive, line level RS-232
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i-1] >= d_parms->math_decode_threshold_uart_rx)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i] < d_parms->math_decode_threshold_uart_rx)
|
|
{
|
|
uart_rx_start = 1;
|
|
|
|
uart_val = 0;
|
|
|
|
uart_rx_x_pos = (uart_sample_per_bit * 1.5) + i;
|
|
|
|
i = uart_rx_x_pos - 1;
|
|
}
|
|
}
|
|
}
|
|
else // modelserie = 1, 2 or 4
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i-1] >= threshold[d_parms->math_decode_uart_rx - 1])
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i] < threshold[d_parms->math_decode_uart_rx - 1])
|
|
{
|
|
uart_rx_start = 1;
|
|
|
|
uart_val = 0;
|
|
|
|
uart_rx_x_pos = (uart_sample_per_bit * 1.5) + i;
|
|
|
|
i = uart_rx_x_pos - 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else // negative, cpu level TTL/CMOS
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i-1] < d_parms->math_decode_threshold_uart_rx)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i] >= d_parms->math_decode_threshold_uart_rx)
|
|
{
|
|
uart_rx_start = 1;
|
|
|
|
uart_val = 0;
|
|
|
|
uart_rx_x_pos = (uart_sample_per_bit * 1.5) + i;
|
|
|
|
i = uart_rx_x_pos - 1;
|
|
}
|
|
}
|
|
}
|
|
else // modelserie = 1, 2 or 4
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i-1] < threshold[d_parms->math_decode_uart_rx - 1])
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i] >= threshold[d_parms->math_decode_uart_rx - 1])
|
|
{
|
|
uart_rx_start = 1;
|
|
|
|
uart_val = 0;
|
|
|
|
uart_rx_x_pos = (uart_sample_per_bit * 1.5) + i;
|
|
|
|
i = uart_rx_x_pos - 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else // uart_rx_start != 0
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i] >= d_parms->math_decode_threshold_uart_rx)
|
|
{
|
|
uart_val += (1 << uart_rx_data_bit);
|
|
}
|
|
}
|
|
else // modelserie = 1, 2 or 4
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i] >= threshold[d_parms->math_decode_uart_rx - 1])
|
|
{
|
|
uart_val += (1 << uart_rx_data_bit);
|
|
}
|
|
}
|
|
|
|
if(++uart_rx_data_bit == d_parms->math_decode_uart_width)
|
|
{
|
|
if((d_parms->math_decode_uart_end) && (d_parms->math_decode_format != 4)) // big endian?
|
|
{
|
|
uart_val = reverse_bitorder_8(uart_val);
|
|
|
|
uart_val >>= (8 - uart_rx_data_bit);
|
|
}
|
|
|
|
if(!d_parms->math_decode_uart_pol) // positive, line level RS-232 or negative, cpu level TTL/CMOS?
|
|
{
|
|
uart_val = ~uart_val;
|
|
|
|
uart_val &= (0xff >> (8 - uart_rx_data_bit));
|
|
}
|
|
|
|
d_parms->math_decode_uart_rx_val[d_parms->math_decode_uart_rx_nval] = uart_val;
|
|
|
|
d_parms->math_decode_uart_rx_val_pos[d_parms->math_decode_uart_rx_nval] =
|
|
i - (uart_rx_data_bit * uart_sample_per_bit) + (0.5 * uart_sample_per_bit);
|
|
|
|
uart_rx_data_bit = 0;
|
|
|
|
uart_rx_start = 0;
|
|
|
|
d_parms->math_decode_uart_rx_err[d_parms->math_decode_uart_rx_nval] = 0;
|
|
|
|
if(d_parms->math_decode_uart_par)
|
|
{
|
|
uart_rx_x_pos += uart_sample_per_bit;
|
|
|
|
i = uart_rx_x_pos;
|
|
|
|
if(i < d_parms->wavebufsz)
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i] >= d_parms->math_decode_threshold_uart_rx)
|
|
{
|
|
if(d_parms->math_decode_uart_pol)
|
|
{
|
|
uart_parity_bit = 1;
|
|
}
|
|
else
|
|
{
|
|
uart_parity_bit = 0;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if(d_parms->math_decode_uart_pol)
|
|
{
|
|
uart_parity_bit = 0;
|
|
}
|
|
else
|
|
{
|
|
uart_parity_bit = 1;
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i] >= threshold[d_parms->math_decode_uart_rx - 1])
|
|
{
|
|
if(d_parms->math_decode_uart_pol)
|
|
{
|
|
uart_parity_bit = 1;
|
|
}
|
|
else
|
|
{
|
|
uart_parity_bit = 0;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if(d_parms->math_decode_uart_pol)
|
|
{
|
|
uart_parity_bit = 0;
|
|
}
|
|
else
|
|
{
|
|
uart_parity_bit = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
for(j=0, uart_parity=0; j<d_parms->math_decode_uart_width; j++)
|
|
{
|
|
uart_parity += ((uart_val >> j) & 1);
|
|
}
|
|
|
|
if(d_parms->math_decode_uart_par & 1)
|
|
{
|
|
uart_parity++;
|
|
}
|
|
|
|
if((uart_parity & 1) != uart_parity_bit)
|
|
{
|
|
d_parms->math_decode_uart_rx_err[d_parms->math_decode_uart_rx_nval] = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
uart_rx_x_pos += uart_sample_per_bit;
|
|
|
|
i = uart_rx_x_pos;
|
|
|
|
stop_bit_error = 0; // check stop bit
|
|
|
|
if(i < d_parms->wavebufsz)
|
|
{
|
|
if(d_parms->modelserie == 6)
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i] >= d_parms->math_decode_threshold_uart_rx)
|
|
{
|
|
stop_bit_error = 1;
|
|
}
|
|
}
|
|
else // modelserie = 1, 2 or 4
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_uart_rx - 1][i] >= threshold[d_parms->math_decode_uart_rx - 1])
|
|
{
|
|
stop_bit_error = 1;
|
|
}
|
|
}
|
|
|
|
if(d_parms->math_decode_uart_pol)
|
|
{
|
|
if(stop_bit_error)
|
|
{
|
|
stop_bit_error = 0;
|
|
}
|
|
else
|
|
{
|
|
stop_bit_error = 1;
|
|
}
|
|
}
|
|
|
|
if(stop_bit_error)
|
|
{
|
|
d_parms->math_decode_uart_rx_err[d_parms->math_decode_uart_rx_nval] = 1;
|
|
}
|
|
}
|
|
|
|
if(d_parms->math_decode_uart_stop == 1)
|
|
{
|
|
uart_rx_x_pos += uart_sample_per_bit / 2;
|
|
}
|
|
else if(d_parms->math_decode_uart_stop == 2)
|
|
{
|
|
uart_rx_x_pos += uart_sample_per_bit;
|
|
}
|
|
|
|
i = uart_rx_x_pos - 1;
|
|
|
|
d_parms->math_decode_uart_rx_nval++;
|
|
}
|
|
else
|
|
{
|
|
uart_rx_x_pos += uart_sample_per_bit;
|
|
|
|
i = uart_rx_x_pos - 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if(d_parms->math_decode_mode == DECODE_MODE_SPI)
|
|
{
|
|
d_parms->math_decode_spi_mosi_nval = 0;
|
|
|
|
d_parms->math_decode_spi_miso_nval = 0;
|
|
|
|
spi_data_mosi_bit = 0;
|
|
|
|
spi_data_miso_bit = 0;
|
|
|
|
spi_mosi_val = 0;
|
|
|
|
spi_miso_val = 0;
|
|
|
|
spi_timeout_cntr = 0;
|
|
|
|
if(d_parms->math_decode_spi_width > 24)
|
|
{
|
|
spi_chars = 4;
|
|
}
|
|
else if(d_parms->math_decode_spi_width > 16)
|
|
{
|
|
spi_chars = 3;
|
|
}
|
|
else if(d_parms->math_decode_spi_width > 8)
|
|
{
|
|
spi_chars = 2;
|
|
}
|
|
else
|
|
{
|
|
spi_chars = 1;
|
|
}
|
|
|
|
if(d_parms->math_decode_spi_edge) // sample at rising edge of spi clock?
|
|
{
|
|
spi_clk_old = 1;
|
|
}
|
|
else
|
|
{
|
|
spi_clk_old = 0;
|
|
}
|
|
|
|
if(!d_parms->chandisplay[d_parms->math_decode_spi_clk]) // without a clock we can't do much...
|
|
{
|
|
goto SPI_DECODE_OUT;
|
|
}
|
|
|
|
if(d_parms->math_decode_spi_mode) // use chip select line?
|
|
{
|
|
if(d_parms->math_decode_spi_cs) // is chip select channel selected?
|
|
{
|
|
if(!d_parms->chandisplay[d_parms->math_decode_spi_cs]) // is selected channel for CS enabled?
|
|
{
|
|
goto SPI_DECODE_OUT;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
goto SPI_DECODE_OUT;
|
|
}
|
|
}
|
|
else // use timeout to detect start of frame
|
|
{
|
|
if(d_parms->timebasedelayenable)
|
|
{
|
|
spi_timeout = d_parms->math_decode_spi_timeout / (d_parms->timebasedelayscale / 100.0);
|
|
}
|
|
else
|
|
{
|
|
spi_timeout = d_parms->math_decode_spi_timeout / (d_parms->timebasescale / 100.0);
|
|
}
|
|
}
|
|
|
|
for(i=0; i<d_parms->wavebufsz; i++)
|
|
{
|
|
if(d_parms->math_decode_spi_mosi_nval >= DECODE_MAX_CHARS)
|
|
{
|
|
break;
|
|
}
|
|
|
|
if(d_parms->math_decode_spi_mode) // use chip select line?
|
|
{
|
|
if(d_parms->math_decode_spi_select) // use positive chip select?
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_spi_cs - 1][i] < threshold[d_parms->math_decode_spi_cs - 1])
|
|
{
|
|
spi_data_mosi_bit = 0;
|
|
|
|
spi_data_miso_bit = 0;
|
|
|
|
spi_mosi_val = 0;
|
|
|
|
spi_miso_val = 0;
|
|
|
|
continue; // chip select is not active
|
|
}
|
|
}
|
|
else // use negative chip select?
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_spi_cs - 1][1] >= threshold[d_parms->math_decode_spi_cs - 1])
|
|
{
|
|
spi_data_mosi_bit = 0;
|
|
|
|
spi_data_miso_bit = 0;
|
|
|
|
spi_mosi_val = 0;
|
|
|
|
spi_miso_val = 0;
|
|
|
|
continue; // chip select is not active
|
|
}
|
|
}
|
|
}
|
|
else // use timeout to detect start of frame
|
|
{
|
|
if(spi_timeout_cntr > spi_timeout)
|
|
{
|
|
spi_data_mosi_bit = 0;
|
|
|
|
spi_data_miso_bit = 0;
|
|
|
|
spi_mosi_val = 0;
|
|
|
|
spi_miso_val = 0;
|
|
}
|
|
else
|
|
{
|
|
spi_timeout_cntr++;
|
|
}
|
|
}
|
|
|
|
if(d_parms->wavebuf[d_parms->math_decode_spi_clk][i] >= threshold[d_parms->math_decode_spi_clk])
|
|
{
|
|
spi_clk_new = 1;
|
|
}
|
|
else
|
|
{
|
|
spi_clk_new = 0;
|
|
}
|
|
|
|
if(spi_clk_old == spi_clk_new)
|
|
{
|
|
continue; // no clock change
|
|
}
|
|
|
|
if(d_parms->math_decode_spi_edge != spi_clk_new) // wrong clock edge?
|
|
{
|
|
spi_clk_old = spi_clk_new;
|
|
|
|
continue;
|
|
}
|
|
|
|
spi_timeout_cntr = 0;
|
|
|
|
spi_clk_old = spi_clk_new;
|
|
|
|
if(d_parms->math_decode_spi_mosi)
|
|
{
|
|
if(d_parms->chandisplay[d_parms->math_decode_spi_mosi - 1]) // don't try to decode if channel isn't enabled...
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_spi_mosi - 1][i] >= threshold[d_parms->math_decode_spi_mosi - 1])
|
|
{
|
|
spi_mosi_val += (1 << spi_data_mosi_bit);
|
|
}
|
|
|
|
if(!spi_data_mosi_bit) spi_mosi_bit0_pos = i;
|
|
|
|
if(++spi_data_mosi_bit == d_parms->math_decode_spi_width)
|
|
{
|
|
if((d_parms->math_decode_spi_end) && (d_parms->math_decode_format != 4)) // big endian?
|
|
{
|
|
spi_mosi_val = reverse_bitorder_32(spi_mosi_val);
|
|
|
|
spi_mosi_val >>= (32 - spi_data_mosi_bit);
|
|
}
|
|
|
|
if(!d_parms->math_decode_spi_pol)
|
|
{
|
|
spi_mosi_val = ~spi_mosi_val;
|
|
|
|
switch(spi_chars)
|
|
{
|
|
case 1: spi_mosi_val &= 0xff;
|
|
break;
|
|
case 2: spi_mosi_val &= 0xffff;
|
|
break;
|
|
case 3: spi_mosi_val &= 0xffffff;
|
|
break;
|
|
}
|
|
}
|
|
|
|
d_parms->math_decode_spi_mosi_val[d_parms->math_decode_spi_mosi_nval] = spi_mosi_val;
|
|
|
|
d_parms->math_decode_spi_mosi_val_pos[d_parms->math_decode_spi_mosi_nval] = spi_mosi_bit0_pos;
|
|
|
|
d_parms->math_decode_spi_mosi_val_pos_end[d_parms->math_decode_spi_mosi_nval++] = i;
|
|
|
|
spi_data_mosi_bit = 0;
|
|
|
|
spi_mosi_val = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
if(d_parms->math_decode_spi_miso)
|
|
{
|
|
if(d_parms->chandisplay[d_parms->math_decode_spi_miso - 1]) // don't try to decode if channel isn't enabled...
|
|
{
|
|
if(d_parms->wavebuf[d_parms->math_decode_spi_miso - 1][i] >= threshold[d_parms->math_decode_spi_miso - 1])
|
|
{
|
|
spi_miso_val += (1 << spi_data_miso_bit);
|
|
}
|
|
|
|
if(!spi_data_miso_bit) spi_miso_bit0_pos = i;
|
|
|
|
if(++spi_data_miso_bit == d_parms->math_decode_spi_width)
|
|
{
|
|
if((d_parms->math_decode_spi_end) && (d_parms->math_decode_format != 4)) // big endian?
|
|
{
|
|
spi_miso_val = reverse_bitorder_32(spi_miso_val);
|
|
|
|
spi_miso_val >>= (32 - spi_data_miso_bit);
|
|
}
|
|
|
|
if(!d_parms->math_decode_spi_pol)
|
|
{
|
|
spi_miso_val = ~spi_miso_val;
|
|
}
|
|
|
|
d_parms->math_decode_spi_miso_val[d_parms->math_decode_spi_miso_nval] = spi_miso_val;
|
|
|
|
d_parms->math_decode_spi_miso_val_pos[d_parms->math_decode_spi_miso_nval] = spi_miso_bit0_pos;
|
|
|
|
d_parms->math_decode_spi_miso_val_pos_end[d_parms->math_decode_spi_miso_nval++] = i;
|
|
|
|
spi_data_miso_bit = 0;
|
|
|
|
spi_miso_val = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
SPI_DECODE_OUT:
|
|
|
|
i = 0; // FIXME
|
|
}
|
|
}
|
|
|
|
|
|
inline unsigned char UI_Mainwindow::reverse_bitorder_8(unsigned char byte)
|
|
{
|
|
byte = (byte & 0xf0) >> 4 | (byte & 0x0f) << 4;
|
|
byte = (byte & 0xcc) >> 2 | (byte & 0x33) << 2;
|
|
byte = (byte & 0xaa) >> 1 | (byte & 0x55) << 1;
|
|
|
|
return byte;
|
|
}
|
|
|
|
|
|
inline unsigned int UI_Mainwindow::reverse_bitorder_32(unsigned int val)
|
|
{
|
|
val = (val & 0xffff0000) >> 16 | (val & 0x0000ffff) << 16;
|
|
val = (val & 0xff00ff00) >> 8 | (val & 0x00ff00ff) << 8;
|
|
val = (val & 0xf0f0f0f0) >> 4 | (val & 0x0f0f0f0f) << 4;
|
|
val = (val & 0xcccccccc) >> 2 | (val & 0x33333333) << 2;
|
|
val = (val & 0xaaaaaaaa) >> 1 | (val & 0x55555555) << 1;
|
|
|
|
return val;
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|