readme updated
rodzic
bd2550ec83
commit
36fb8c37f9
22
README.md
22
README.md
|
@ -6,27 +6,17 @@ He is the author of BG_RF95!
|
|||
If you start the FW for the first time you are asked to program your callsign and SSID(s).<br>
|
||||
Once the callsign is programmed you can reenter the programming mode by pressing the BUTTON (GPIO39) for 3secs while switching on the tracker.<br>
|
||||
|
||||
The MODE of the tracker can now be changed by pressing button at <b>GPIO39 for 10secs</b>!<br>
|
||||
The MODE, fiex position and Symbol of the tracker can now be changed by pressing button at <b>GPIO39 for 10secs</b>!<br>
|
||||
<b>The modes are</b><br>
|
||||
TRACKER ... normal APRS tracker<br>
|
||||
WX&TRACKER ... alternate transmission of normal position packet and WX packet (if DHT22 is mounted)<br>
|
||||
WX-MOVE ... only WX packets are sent but with position from GPSLED<br>
|
||||
WX-FIXED ... only WX packets are transmitted but with fixed position given in Header-File<br>
|
||||
<br>
|
||||
The <b>fixed position</b> is used for a fixed weather station, e.g. without GPS signal.<br>
|
||||
<br>
|
||||
Possible symbols are<br>
|
||||
Weather Station, Car, Runner, Bicyle, Motorcycle<br>
|
||||
|
||||
<b>TTGO_T-Beam_LoRa_APRS.h</b><br>
|
||||
All other user settings are still hardprogrammed and can be found in TTGO_T-Beam_LoRa_APRS.h<br>
|
||||
|
||||
<b>"sTable"</b> should contain the value for the primary or secondary symbol table<br>
|
||||
<b>"sSymbol"</b> contains finally the symbol to be sent with the position report
|
||||
|
||||
<b>"wxTable"</b> should contain the value for the primary or secondary symbol table used for weather reports<br>
|
||||
<b>"wxSymbol"</b> contains finally the symbol to be sent with the weather report
|
||||
|
||||
<b>"nextTX"</b> is the transmit intervall in ms (milli seconds) - don't use to short intervalls as it overloads the APRS servers<br>
|
||||
60000L is a could starting point and means a intervall of 60secs or 1 minute.
|
||||
|
||||
the following lines are used to define the fixed position<br>
|
||||
<b>#define LATITUDE "4813.62N"</b> // please in APRS notation DDMM.mmN or DDMM.mmS used for FIXED_POSITION<br>
|
||||
<b>#define LONGITUDE "01539.85E"</b>
|
||||
|
||||
for DHT22 I used the library from https://github.com/beegee-tokyo/DHTesp, as the standard library gives to many wrong readings
|
||||
|
|
Ładowanie…
Reference in New Issue