TTGO-T-Beam-LoRa-APRS

WiFi Settings

APRS Settings

Transmission Settings

Main Frequency [MHz]

Speed

Enable LoRa transmitter

Enable LoRa receiver

TX power [dBm]

Automatic CodeRate adaption on TX

Filter src-calls on receiption

Add SNR and RSSI to path. '*': only if heard direct (recommended for many usecases). '~': not recommended; better let user decide with Q-addressing

More info for SNR/RSSI path encoding see documentation section below

SNR/RSSI-encoding on kiss: compatible to APRS-IS?

Station Settings

Callsign and SSID

Relay Path

Symbol Table

Symbol

Show Altitude

Show Comment

Comment

Ratelimit adding comment text

Show Battery

Telemetry Settings

Enable Self Telemetry

Self Telemetry Interval [s]

Self Telemetry Sequence

Self Telemetry Relay Path

Fixed Beaconing Settings

Fixed Beacon

Fixed Beacon Interval [s]

Latitude Preset

Longitude Preset

Smart Beaconing Settings

Min interval [s]

Max interval [s]

Min speed [km/h]

Max speed [km/h]

Course change [degrees]

Turn Slope [degrees]

Turn Time [seconds]

GPS enabled

Accept own positions via KISS

Allow GPS sleep while own positions received via KISS

Additional settings for secondary frequency:
EXPERIMANTAL - USE WITH CARE!

Secondary Frequency [MHz] (for cross-repeating or listening transmissions from igates)

TX power on secondary frequency [dBm]

Speed on secondary frequency

RX on frequencies (Only honored, if we are NOT configured as WIDE1 or WIDE2 digi. If set to both frequencies: Ratio depends on how many packets are received on each qrg in a 10min window; we stay 20s on one qrg.)

Current RX Frequency:

Additional settings for mode repater:
EXPERIMANTAL - USE WITH CARE!

LoRa Repater Mode

Digipeat heard stations from MAIN frequency to which frequencies (If LoRa Repeater Mode has not been set to off)

TX our beacon from this device or from-kiss to frequencies (Only honored, if we are configured as WIDE1 or WIDE2 digi)

APRS-IS settings

Enable APRS-IS connection

Server Name

TCP Port

Callsign (optional)

Password (required)

Filter (optional)

Allow traffic from inet to rf

TX our beacon to APRS-IS

Connection status

Device Settings

OLED Display enabled

Bluetooth enabled

LED signaling

Auto power off

Display show RX time [s]

Display timeout [s]

Auto power off delay [s]

Received

Time (UTC)	Frame	RSSI	SNR

Actions

Update

Click here to view your configuration.

Documentation

Info for SNR/RSSI path encoding

If enabled, add SNR and RSSI in path on receiption, prefixed with 'Q'. Examples:
SNR 23 RSSI -73 -> Q2373
SNR -03 RSSI -104 -> QA3K4
SNR -13 RSSI -114 -> QB3L4
Still testing, if it behaves good to our network.
Use with care; resulting longer path consumes a bit more airtime.

User key functions (hardware buttons):

short press

If OLED is enabled and OLED is OFF:

a short press will wake it up and show current data (as "Display Timeout" seconds

If OLED is disabled or OLED is ON:

with GPS-FIX immediate sending of a frame with the position from the GPS
without GPS-FIX, immediate sending of the frame with the position saved in the configuration

long press

toggle on or off GPS power supply
if the "FIXED_BEACON_EN" option is enabled in the configuration, a beacon will be sent every set time interval
while booting: reset to factory default