mirror
/
Arduino-RFM69HCW-GPS
kopia lustrzana https://github.com/SnkMtn000/Arduino-RFM69HCW-GPS
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Update README.md

master
SnkMtn000 2018-01-29 17:32:03 -05:00 zatwierdzone przez GitHub
rodzic 52cd3c0640
commit 13dac591ad
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
1 zmienionych plików z 5 dodań i 3 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

8
README.md
Wyświetl plik

@ -4,14 +4,16 @@ I stand on the shoulder of giants.
My code/sketches are built on previously shared code by three other contributers. They are noted at the top at each arduino sketch. My code/sketches are built on previously shared code by three other contributers. They are noted at the top at each arduino sketch.
Supported board I created and shared at: https://oshpark.com/shared_projects/vCLw90ht I drive everything, promini33, rfm69hcw and GPS, from the pro-mini 3.3v requlator with success from a 9vdc battery, but canot not recommend this. I'm using a Ublox NEO-6 GPS Module with great success. Take care of the ceramic antenna. It is a brick dangling on a thread and when the center conductor breaks fails to work. I've repaird my by stripping back the thin coax and making a very tiny light weight and high gain 1.5 GHz ground plane antenna. Supported board I created and shared at: https://oshpark.com/shared_projects/vCLw90ht I drive everything, promini33, rfm69hcw and GPS, from the pro-mini 3.3v requlator with success from a 9vdc battery, but cannot not recommend this. I'm using a Ublox NEO-6 GPS Module with great success. Take care of the ceramic antenna. It is a brick dangling on a thread and when the center conductor breaks fails to work. I've repaird mine by stripping back the thin coax and making a very tiny light weight and high gain 1.5 GHz ground plane antenna.
These sketches may also work with the adafruit feather M0 with the noted pin changes. I do not have one and could not test. These sketches may also work with the adafruit feather M0 with the noted pin changes in software. I do not have one and could not test.
Three modes supported, Morse, Feld Hell, and RTTY 5N1 170Hz. Three modes supported, Morse, Feld Hell, and RTTY 5N1 170Hz.
Three sketches per mode. 1) a keyboard input mode, a raw beacon mode, and one that transmits GPS telemetry. Three sketches per mode. 1) a keyboard input mode, a raw beacon mode, and one that transmits GPS telemetry.
Good luck. For Feld Helland More I'm using modulation type for register 0x02 = 0x34 of which bit 4 is undefined but works! Need to flix/clarify this.
Good luck. Enjoy.
73 KC1ENN aka SnkMtn000 73 KC1ENN aka SnkMtn000