From e8ece766efc3543e1be0b350c4285914aa030b8a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Simon=20K=C3=BCppers?= Date: Mon, 30 Jan 2023 15:43:53 +0100 Subject: [PATCH] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 4ca8077..1d9ce37 100644 --- a/README.md +++ b/README.md @@ -50,7 +50,7 @@ The total bill should be around 60$ US for 5 pieces plus tax and shipping from C This is the process I use for building. See photographs in ``images`` folder. - You need to use Monacor PG-204P and PG-203P or compatible TRS connectors (2 solder lugs and a big tab for the sleeve connection) - Cut the 2.5mm and 3.5mm TRS sleeve tab where the hole is located -- Put both TRS connectors into the solder guide (or a cheap HT that you don't mind potentially damaging). Make sure, that they are seated all the way in +- Put both TRS connectors into the 3d-printed solder guide (or a cheap HT that you don't mind potentially damaging). Make sure, that they are seated all the way in. If the holes in the solder guide are too small, you can ream them using a 2.5mm and 3.5mm drill bit. - Insert the AIOC PCB into the solder guide - Solder sleeve tab on the back side for both TRS connectors first - Turn around PCB and solder remaining solder lugs