This is the Ham Radio *All-in-one-Cable*. **It is currently in beta testing phase - Be wary!** Please read this README carefully before ordering anything.
The AIOC is a small adapter with a USB-C connector that enumerates itself as a sound-card (e.g. for APRS purposes), a virtual tty ("COM Port") for programming and asserting the PTT (Push-To-Talk) as well as a CM108 compatible HID endpoint for CM108-style PTT (new in firmware version 1.2.0).
[![All In One Cable AIOC - Ham Nuggets Season 4 Episode 8 S04E08](http://img.youtube.com/vi/RZjoPNe634o/0.jpg)](http://www.youtube.com/watch?v=RZjoPNe634o "All In One Cable AIOC - Ham Nuggets Season 4 Episode 8 S04E08")
[![Your BAOFENG Programming Cable Sucks! - Get This! - AIOC All in One Cable](http://img.youtube.com/vi/xRCmXQYRLE0/0.jpg)](http://www.youtube.com/watch?v=xRCmXQYRLE0 "Your BAOFENG Programming Cable Sucks! - Get This! - AIOC All in One Cable")
- Put both TRS connectors into the 3d-printed solder guide (or a cheap HT that you don't mind potentially damaging). Make sure, that they are seated all the way in. If the holes in the solder guide are too small, you can ream them using a 2.5mm and 3.5mm drill bit.
__Note__ that a ``libusb`` driver is required for this. On Windows there are additional steps required as shown [here](https://yeswolf.github.io/dfu) (*DFuSe Utility and dfu-util*). On other operating systems (e.g. Linux, MacOS), this just works ™ (provided libusb is installed on your system).
The serial interface of the AIOC enumerates as a regular COM (Windows) or ttyACM port (Linux) and can be used as such for programming the radio as well as PTT (Asserted on ``DTR=1`` and ``RTS=0``).
__Note__ before firmware version 1.2.0, PTT was asserted by ``DTR=1`` (ignoring RTS) which caused problems with certain radios when using the serial port for programming the radio e.g. using CHIRP.
The soundcard interface of the AIOC gives access to the audio data channels. It has one mono microphone channel and one mono speaker channel and currently supports the following baudrates:
Since firmware version 1.2.0, a CM108 style PTT interface is available for public testing. This interface works in parallel to the COM-port PTT.
Direwolf on Linux is confirmed working, please report any issues. Note that currently, Direwolf reports some warnings when using the CM108 PTT interface on the AIOC.
While they are annoying, they are safe to ignore and require changes in the upstream direwolf sourcecode. See https://github.com/wb2osz/direwolf/issues/448 for more details.
However, since APRSdroid does not have any PTT control, sending data is currently not possible using the AIOC except using the radio VOX function. See https://github.com/ge0rg/aprsdroid/issues/324.
My previous experience is, that the Android kernel brings support for ttyACM devices (which is perfect for the AIOC) so implementing this feature for APRSdroid should theoretically be no problem.
Ideas such as implementing a digital-modes-spefic VOX-emulation to workaround this problem and let the AIOC activate the PTT automatically are currently being considered.
Voice your opinion and ideas in the GitHub issues if this seems interesting to you.
## Notes on CHIRP
CHIRP is a very popuplar open-source programming software that supports a very wide array of HT radios. You can use CHIRP just as you would like with a regular programming cable.