kopia lustrzana https://github.com/HarrydeBug/1011-WSPR-TX_LP1
922 wiersze
29 KiB
C++
922 wiersze
29 KiB
C++
//Software for the Zachtek WSPR-TX_LP1 product. Product number 1011.
|
|
//There are two different firmware for this board:
|
|
//1: This code you are reading now is the "Hardcoded Info" it stores all the data like Callsign and Power data in the source code itself
|
|
// It is smaller in size and simpler in many ways so if you want to modify the code, expand, add sensors etc etc, this might be easier to use.
|
|
// But it i not very flexible. This was the first firmware released while teh "Standard firmware was developed.
|
|
// This is now considered depriciated and future development and improvment will be on the "Standard firmware"
|
|
//2: The "Standard firmware" version that is designed to be used with a PC software to set all the data like callsign, power level, band hopping etc
|
|
// To acheive this it uses a Serial API and stores settings in EEPROM. It can do more but it is much bigger and can be hard to understand for the beginner.
|
|
//
|
|
//The Version of this software is stored in the constant "softwareversion" and is displayed on the Serialport att startup
|
|
//To compile you need to install several libraries, se below in the #include section what they are and download them using The Library manager in the Arduino IDE or use the direct URL
|
|
//For Arduino Pro Mini 3.3V 8MHz.
|
|
//
|
|
// Version History
|
|
// 1.05 initial Release
|
|
// 1.06 Disabled transmission if callsing was not changed (variable "call[]" on row 115 sets callsign), added TXPause variable to set duty cycle of transmission.
|
|
// 1.07 Added more predefined frequency bands every band from 2190m to 4m are now defined
|
|
// 1.08 Moved the define for Reference Frequency to line 124 to make it easier to find
|
|
// 1.09 Added Bandhoping and a better RandomSeed
|
|
//
|
|
//The WSPR coding is based on Jason Mildrums example code. See his orgiginal Copyright text below the line.
|
|
//Harry "deBug" Zachrisson of ZachTek 2018
|
|
//-----------------------------------------------------------------
|
|
// WSPR beacon for Arduino, by Jason Milldrum NT7S.
|
|
// Original code based on Feld Hell beacon for Arduino by Mark
|
|
// Vandewettering K6HX, adapted for the Si5351A by Robert
|
|
// Liesenfeld AK6L <ak6l@ak6l.org>.
|
|
//
|
|
// Permission is hereby granted, free of charge, to any person obtaining
|
|
// a copy of this software and associated documentation files (the
|
|
// "Software"), to deal in the Software without restriction, including
|
|
// without limitation the rights to use, copy, modify, merge, publish,
|
|
// distribute, sublicense, and/or sell copies of the Software, and to
|
|
// permit persons to whom the Software is furnished to do so, subject
|
|
// to the following conditions:
|
|
// The above copyright notice and this permission notice shall be
|
|
// included in all copies or substantial portions of the Software.
|
|
|
|
#include <TinyGPS++.h> //TinyGPS++ library by Mikal Hart https://github.com/mikalhart/TinyGPSPlus
|
|
#include <JTEncode.h> //JTEncode by NT7S https://github.com/etherkit/JTEncode
|
|
#include <SoftwareSerial.h> //Arduino SoftSerial
|
|
|
|
|
|
// Data structures
|
|
enum E_Band
|
|
{
|
|
LF2190m = 0,
|
|
LF630m = 1,
|
|
HF160m = 2,
|
|
HF80m = 3,
|
|
HF40m = 4,
|
|
HF30m = 5,
|
|
HF20m = 6,
|
|
HF17m = 7,
|
|
HF15m = 8,
|
|
HF12m = 9,
|
|
HF10m = 10,
|
|
HF6m = 11,
|
|
VHF4m = 12
|
|
};
|
|
|
|
|
|
void i2cInit();
|
|
uint8_t i2cSendRegister(uint8_t reg, uint8_t data);
|
|
uint8_t i2cReadRegister(uint8_t reg, uint8_t *data);
|
|
|
|
#define I2C_START 0x08
|
|
#define I2C_START_RPT 0x10
|
|
#define I2C_SLA_W_ACK 0x18
|
|
#define I2C_SLA_R_ACK 0x40
|
|
#define I2C_DATA_ACK 0x28
|
|
#define I2C_WRITE 0b11000000
|
|
#define I2C_READ 0b11000001
|
|
#define SI5351A_H
|
|
|
|
#define SI_CLK0_CONTROL 16 // Register definitions
|
|
#define SI_CLK1_CONTROL 17
|
|
#define SI_CLK2_CONTROL 18
|
|
#define SI_SYNTH_PLL_A 26
|
|
#define SI_SYNTH_PLL_B 34
|
|
#define SI_SYNTH_MS_0 42
|
|
#define SI_SYNTH_MS_1 50
|
|
#define SI_SYNTH_MS_2 58
|
|
#define SI_PLL_RESET 177
|
|
|
|
#define SI_R_DIV_1 0b00000000 // R-division ratio definitions
|
|
#define SI_R_DIV_2 0b00010000
|
|
#define SI_R_DIV_4 0b00100000
|
|
#define SI_R_DIV_8 0b00110000
|
|
#define SI_R_DIV_16 0b01000000
|
|
#define SI_R_DIV_32 0b01010000
|
|
#define SI_R_DIV_64 0b01100000
|
|
#define SI_R_DIV_128 0b01110000
|
|
|
|
#define SI_CLK_SRC_PLL_A 0b00000000
|
|
#define SI_CLK_SRC_PLL_B 0b00100000
|
|
|
|
|
|
|
|
|
|
//defines for TX Frequeny of WSPR on the HAM bands
|
|
#define WSPR_TONE_SPACING 146 // ~1.46 Hz Tone spacng in centiHz
|
|
#define WSPR_DELAY 683 // Delay value for WSPR delay in milliseconds
|
|
|
|
#define WSPR_FREQ4m 7009250000ULL //4m 70.092,500MHz
|
|
#define WSPR_FREQ6m 5029450000ULL //6m 50.294,500MHz
|
|
#define WSPR_FREQ10m 2812620000ULL //10m 28.126,200MHz
|
|
#define WSPR_FREQ12m 2492620000ULL //12m 24.926,200MHz
|
|
#define WSPR_FREQ15m 2109620000ULL //15m 21.096.200MHz
|
|
#define WSPR_FREQ17m 1810610000ULL //17m 18.106,100MHz
|
|
#define WSPR_FREQ20m 1409710000ULL //20m 14.097,100MHz
|
|
#define WSPR_FREQ30m 1014020000ULL //30m 10.140,200MHz
|
|
#define WSPR_FREQ40m 704010000ULL //40m 7.040,100MHz
|
|
#define WSPR_FREQ80m 359410000ULL //80m 3.394,100MHz
|
|
#define WSPR_FREQ160m 183810000ULL //160m 1.838,100MHz
|
|
#define WSPR_FREQ630m 47570000ULL //630m 475.700kHz
|
|
#define WSPR_FREQ2190m 13750000ULL //2190m 137.500kHz
|
|
|
|
bool TXOnBand [13]; //Arraycount corresponds to the Enum E_Band, True =Transmitt Enabled, False = Transmitt disabled on this band E.g to transmitt on 40m and 20m set TXOnBand[4] and TXOnBand[6] to true.
|
|
int CurrentBand = 0; //Keeps track on what band we are currently tranmitting on
|
|
// Hardware defines
|
|
#define LEDIndicator1 4 //Yellow LED to indicator that blinks at different rates depending on GPS Lock, waiting for time to go to top of minute, Transmitting etc
|
|
#define TransmitLED 8 //Red LED next to RF out SMA that will turn on when Transmitting
|
|
|
|
const char softwareversion[] = "1.09" ; //Version of this program, sent to serialport at startup
|
|
|
|
|
|
// Class instantiation
|
|
JTEncode jtencode;
|
|
|
|
// The TinyGPS++ object
|
|
TinyGPSPlus gps;
|
|
|
|
// The serial connection to the GPS device
|
|
SoftwareSerial GPSSerial(2, 3); //GPS Serial port, RX on pin 2, TX on pin 3
|
|
|
|
void si5351aOutputOff(uint8_t clk);
|
|
void si5351aSetFrequency(uint32_t frequency);
|
|
|
|
//*********************************************************************************************
|
|
//----------------------- Set Transmit Frequency and Amateur call sign here--------------------
|
|
//*********************************************************************************************
|
|
char call[] = "AA0AAA"; //**********Set your call sign here **************
|
|
uint8_t dbm = 23; //Output power in dBm. The WSPR-TX gives out about 24dBm after Low Pass filtering so 23 is closest value in WSPR coding, change this if you have an attenuater or amplifier connected
|
|
unsigned long TXPause = 120; //numer of seconds to pause after a transmission cycle (after all enabled bands have been transmitted on) if you TX on a single band then I recomend a value of at least 120 here.
|
|
char loc[] = "AB01"; //If you dont want to use the GPS provided locator you can hard code a locator here, 4 chars only. You will still need the GPS for timing - Value is used if LocatorByGPS=false. Otherwise it will be owerwritten by GPS routine
|
|
boolean LocatorByGPS = true; //Set to false to disable automatic location by GPS and switch to use the "loc" value
|
|
#define XTAL_FREQ 26000000 // Crystal frequency for a certain board in Hertz, change to fit your induvidual TCXO
|
|
|
|
//''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
|
|
char MHLocator[] = "AA00BB";// Dont change, this is only here to allocate memory, will be changed by the Maidenhead calculator.
|
|
uint8_t tx_buffer[180];
|
|
uint8_t symbol_count;
|
|
uint16_t tone_delay, tone_spacing;
|
|
uint64_t freq;
|
|
|
|
void setup()
|
|
{
|
|
//***********************************************************************************************
|
|
TXOnBand [0] = false; //LF2190m // Set to true on each band you want to transmit on
|
|
TXOnBand [1] = true; //LF630m
|
|
TXOnBand [2] = false; //HF160m
|
|
TXOnBand [3] = false; //HF80m
|
|
TXOnBand [4] = false; //HF40m
|
|
TXOnBand [5] = false; //HF30m
|
|
TXOnBand [6] = false; //HF20m
|
|
TXOnBand [7] = false; //HF17m
|
|
TXOnBand [8] = false; //HF15m
|
|
TXOnBand [9] = false; //HF12m
|
|
TXOnBand [10] = false; //HF10m
|
|
TXOnBand [11] = false; //HF6m
|
|
TXOnBand [12] = false; //VHF4m
|
|
//************************************************************************************************
|
|
// Set the proper frequency, tone spacing, symbol count, and
|
|
// tone delay depending on mode
|
|
|
|
symbol_count = WSPR_SYMBOL_COUNT; // From the library defines
|
|
tone_spacing = WSPR_TONE_SPACING;
|
|
tone_delay = WSPR_DELAY;
|
|
|
|
bool i2c_found;
|
|
//Initialize Arduinos Serial port
|
|
Serial.begin (9600);
|
|
delay(500);//Wait for Serialport to be initialized properly
|
|
GPSSerial.begin(9600); // //The GPS Serial port
|
|
//Output Initialization text on the serial port
|
|
|
|
Serial.print(F("Zachtek WSPR-TX_LP1 -Hard Codeed Info- Software version: "));
|
|
Serial.println(softwareversion);
|
|
Serial.println(F("Initializing.."));
|
|
Serial.print(F("Callsign set to "));
|
|
Serial.println(call);
|
|
Serial.println(F("Maidenhead postion will be set by GPS"));
|
|
Serial.print(F("Power Data set to "));
|
|
Serial.print(dbm);
|
|
Serial.println(F("dBm"));
|
|
if (NoBandEnabled ()) {
|
|
Serial.println (F("Warning, configuration error, tranmission is not enabled on any band!"));
|
|
}
|
|
else
|
|
{
|
|
Serial.print (F("Transmission enabled on the following bands:"));
|
|
for (int FreqLoop = 0; FreqLoop < 13; FreqLoop++) {
|
|
if (TXOnBand[FreqLoop]) {
|
|
switch (FreqLoop) {
|
|
case 0:
|
|
Serial.print (F(" 2190m,"));
|
|
break;
|
|
case 1:
|
|
Serial.print (F(" 630m,"));
|
|
break;
|
|
case 2:
|
|
Serial.print (F(" 160m,"));
|
|
break;
|
|
case 3:
|
|
Serial.print (F(" 80m,"));
|
|
break;
|
|
case 4:
|
|
Serial.print (F(" 40m,"));
|
|
break;
|
|
case 5:
|
|
Serial.print (F(" 30m,"));
|
|
break;
|
|
case 6:
|
|
Serial.print (F(" 20m,"));
|
|
break;
|
|
case 7:
|
|
Serial.print (F(" 17m,"));
|
|
break;
|
|
case 8:
|
|
Serial.print (F(" 15m,"));
|
|
break;
|
|
case 9:
|
|
Serial.print (F(" 12m,"));
|
|
break;
|
|
case 10:
|
|
Serial.print (F(" 10m,"));
|
|
break;
|
|
case 11:
|
|
Serial.print (F(" 6m,"));
|
|
break;
|
|
case 12:
|
|
Serial.print (F(" 4m,"));
|
|
}
|
|
}//If
|
|
}//For
|
|
Serial.println("");
|
|
|
|
Serial.println(F("Initializing.."));
|
|
pinMode(TransmitLED, OUTPUT);
|
|
pinMode(LEDIndicator1, OUTPUT);
|
|
Serial.println(F("Blinking Yellow LED indicator"));
|
|
for (int i = 0; i <= 30; i++) {
|
|
digitalWrite(LEDIndicator1, HIGH);
|
|
delay (20);
|
|
digitalWrite(LEDIndicator1, LOW);
|
|
delay (20);;
|
|
}
|
|
|
|
|
|
Serial.println(F("Initializing I2C"));
|
|
i2cInit();
|
|
Serial.println(F("Initializing Si5351"));
|
|
si5351aSetFrequency(2000000000ULL);
|
|
si5351aOutputOff(SI_CLK0_CONTROL);
|
|
|
|
Serial.println(F("Initialization is complete."));
|
|
Serial.println();
|
|
NextFreq();
|
|
freq = freq + (100ULL * random (-100, 100)); //modify TX frequency with a random value beween -100 and +100 Hz
|
|
random(RandomSeed());
|
|
|
|
}//Else
|
|
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
//static double Lat;
|
|
//static double Lon;
|
|
static int GPSH;
|
|
static int GPSM;
|
|
static int GPSS;
|
|
//encode ();
|
|
|
|
while (GPSSerial.available()) {
|
|
gps.encode(GPSSerial.read());
|
|
if (gps.location.isUpdated())
|
|
{
|
|
GPSH = gps.time.hour();
|
|
GPSM = gps.time.minute();
|
|
GPSS = gps.time.second();
|
|
calcLocator (gps.location.lat(), gps.location.lng());
|
|
//Serial.print (F("GPS Fix accuired - Maidenhead locator is "));
|
|
//Serial.print(MHLocator);
|
|
loc[0] = MHLocator[0]; loc[1] = MHLocator[1]; loc[2] = MHLocator[2]; loc[3] = MHLocator[3];
|
|
//Serial.print (F(" (using "));
|
|
//Serial.print(loc);
|
|
|
|
//UpdatePos();
|
|
// long seed = (long) (((long)Lat * 10000) + ((long)Lon * 10000));
|
|
// randomSeed(seed);
|
|
|
|
|
|
|
|
if ((GPSS == 0) && ((GPSM % 2) == 0))//If second is zero at even minute then start WSPR transmission
|
|
{
|
|
// Encode the message in the transmit buffer
|
|
set_tx_buffer();
|
|
Serial.println(F("Top of even minute."));
|
|
Serial.print(F("Transmitting for 1 Minute and 50 seconds at frequency :"));
|
|
Serial.print(uint64ToStr(freq / 100, false));
|
|
Serial.println(F("Hz"));
|
|
encode ();
|
|
|
|
if (LastFreq ())
|
|
{
|
|
Serial.print(F("Pausing transmission for "));
|
|
Serial.print(TXPause);
|
|
Serial.println(F(" seconds"));
|
|
smartdelay(TXPause*1000UL);//Pause for some time to give a duty cycle on the transmit. 2000=100%, 20000=50%, 130000=33%
|
|
}
|
|
NextFreq();
|
|
freq = freq + (100ULL * random (-100, 100)); //modify TX frequency with a random value beween -100 and +100 Hz
|
|
|
|
smartdelay(3000);
|
|
Serial.println (F("Waiting for start of even minute to start a new WSPR transmission block"));
|
|
}
|
|
else //Dubble-blink to indicate waiting for top of minute
|
|
{
|
|
if (GPSH<10) Serial.print (F("0"));
|
|
Serial.print (GPSH);
|
|
Serial.print (F(":"));
|
|
if (GPSM<10) Serial.print (F("0"));
|
|
Serial.print (GPSM);
|
|
Serial.print (F(":"));
|
|
if (GPSS<10) Serial.print (F("0"));
|
|
Serial.print (GPSS);
|
|
Serial.print (F(" - "));
|
|
Serial.print(loc);
|
|
Serial.println( );
|
|
//Serial.println (F("Waiting for WSPR timeslot."));
|
|
digitalWrite(LEDIndicator1, HIGH);
|
|
smartdelay (100);
|
|
digitalWrite(LEDIndicator1, LOW);
|
|
smartdelay (100);
|
|
digitalWrite(LEDIndicator1, HIGH);
|
|
smartdelay (100);
|
|
digitalWrite(LEDIndicator1, LOW);
|
|
smartdelay(300);
|
|
}
|
|
}
|
|
if (gps.location.isValid())
|
|
{
|
|
|
|
}
|
|
else
|
|
{
|
|
// //singelblink to indicate waiting for GPS Lock
|
|
digitalWrite(LEDIndicator1, HIGH); // turn the LED on
|
|
smartdelay(100);
|
|
digitalWrite(LEDIndicator1, LOW); // turn the LED off
|
|
Serial.println(F("Waiting for GPS fix. "));
|
|
smartdelay(500);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
|
|
// Loop through the string, transmitting one character at a time.
|
|
void encode()
|
|
{
|
|
uint8_t i;
|
|
unsigned long startmillis;
|
|
unsigned long endmillis;
|
|
boolean TXEnabled = true;
|
|
|
|
// Send WSPR for two minutes
|
|
digitalWrite(LEDIndicator1, HIGH);
|
|
if ((call[0] == 'A') && (call[1] == 'A') && (call[2] == '0') && (call[3] == 'A') && (call[4] == 'A') && (call[5] == 'A')) //Do not actually key the transmitter if the callsign has not been changed from the default one AA0AAA
|
|
{
|
|
Serial.println(F("Callsign is not changed from the default one, Transmit is disabled"));
|
|
Serial.println(F("Recompile this software with your Callsign to enable transmission"));
|
|
TXEnabled = false;
|
|
}
|
|
|
|
startmillis = millis();
|
|
for (i = 0; i < symbol_count; i++)
|
|
{
|
|
endmillis = startmillis + ((i + 1) * (unsigned long) tone_delay) ;
|
|
uint64_t tonefreq;
|
|
tonefreq = freq + ((tx_buffer[i] * tone_spacing));
|
|
if (TXEnabled) si5351aSetFrequency(tonefreq);
|
|
//wait untill tone is transmitted for the correct amount of time
|
|
while (millis() < endmillis) {
|
|
//just wait
|
|
}
|
|
}
|
|
|
|
// Switches off Si5351a output
|
|
si5351aOutputOff(SI_CLK0_CONTROL);
|
|
digitalWrite(LEDIndicator1, LOW);
|
|
Serial.println(F("TX Off"));
|
|
|
|
}
|
|
|
|
void set_tx_buffer()
|
|
{
|
|
// Clear out the transmit buffer
|
|
memset(tx_buffer, 0, sizeof(tx_buffer));
|
|
jtencode.wspr_encode(call, loc, dbm, tx_buffer);
|
|
}
|
|
|
|
|
|
|
|
//Maidenhead code from Ossi Väänänen https://ham.stackexchange.com/questions/221/how-can-one-convert-from-lat-long-to-grid-square
|
|
void calcLocator(double lat, double lon) {
|
|
int o1, o2, o3;
|
|
int a1, a2, a3;
|
|
double remainder;
|
|
// longitude
|
|
remainder = lon + 180.0;
|
|
o1 = (int)(remainder / 20.0);
|
|
remainder = remainder - (double)o1 * 20.0;
|
|
o2 = (int)(remainder / 2.0);
|
|
remainder = remainder - 2.0 * (double)o2;
|
|
o3 = (int)(12.0 * remainder);
|
|
|
|
// latitude
|
|
remainder = lat + 90.0;
|
|
a1 = (int)(remainder / 10.0);
|
|
remainder = remainder - (double)a1 * 10.0;
|
|
a2 = (int)(remainder);
|
|
remainder = remainder - (double)a2;
|
|
a3 = (int)(24.0 * remainder);
|
|
MHLocator[0] = (char)o1 + 'A';
|
|
MHLocator[1] = (char)a1 + 'A';
|
|
MHLocator[2] = (char)o2 + '0';
|
|
MHLocator[3] = (char)a2 + '0';
|
|
MHLocator[4] = (char)o3 + 'A';
|
|
MHLocator[5] = (char)a3 + 'A';
|
|
}
|
|
|
|
|
|
|
|
// This custom version of delay() ensures that the gps object
|
|
// is being "fed".
|
|
static void smartdelay(unsigned long ms)
|
|
{
|
|
unsigned long start = millis();
|
|
do
|
|
{
|
|
while (GPSSerial.available())
|
|
gps.encode(GPSSerial.read());
|
|
} while (millis() - start < ms);
|
|
}
|
|
|
|
|
|
uint8_t i2cStart()
|
|
{
|
|
TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
|
|
|
|
while (!(TWCR & (1 << TWINT))) ;
|
|
|
|
return (TWSR & 0xF8);
|
|
}
|
|
|
|
void i2cStop()
|
|
{
|
|
TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
|
|
|
|
while ((TWCR & (1 << TWSTO))) ;
|
|
}
|
|
|
|
uint8_t i2cByteSend(uint8_t data)
|
|
{
|
|
TWDR = data;
|
|
|
|
TWCR = (1 << TWINT) | (1 << TWEN);
|
|
|
|
while (!(TWCR & (1 << TWINT))) ;
|
|
|
|
return (TWSR & 0xF8);
|
|
}
|
|
|
|
uint8_t i2cByteRead()
|
|
{
|
|
TWCR = (1 << TWINT) | (1 << TWEN);
|
|
|
|
while (!(TWCR & (1 << TWINT))) ;
|
|
|
|
return (TWDR);
|
|
}
|
|
|
|
uint8_t i2cSendRegister(uint8_t reg, uint8_t data)
|
|
{
|
|
uint8_t stts;
|
|
|
|
stts = i2cStart();
|
|
if (stts != I2C_START) return 1;
|
|
|
|
stts = i2cByteSend(I2C_WRITE);
|
|
if (stts != I2C_SLA_W_ACK) return 2;
|
|
|
|
stts = i2cByteSend(reg);
|
|
if (stts != I2C_DATA_ACK) return 3;
|
|
|
|
stts = i2cByteSend(data);
|
|
if (stts != I2C_DATA_ACK) return 4;
|
|
|
|
i2cStop();
|
|
|
|
return 0;
|
|
}
|
|
|
|
uint8_t i2cReadRegister(uint8_t reg, uint8_t *data)
|
|
{
|
|
uint8_t stts;
|
|
|
|
stts = i2cStart();
|
|
if (stts != I2C_START) return 1;
|
|
|
|
stts = i2cByteSend(I2C_WRITE);
|
|
if (stts != I2C_SLA_W_ACK) return 2;
|
|
|
|
stts = i2cByteSend(reg);
|
|
if (stts != I2C_DATA_ACK) return 3;
|
|
|
|
stts = i2cStart();
|
|
if (stts != I2C_START_RPT) return 4;
|
|
|
|
stts = i2cByteSend(I2C_READ);
|
|
if (stts != I2C_SLA_R_ACK) return 5;
|
|
|
|
*data = i2cByteRead();
|
|
|
|
i2cStop();
|
|
|
|
return 0;
|
|
}
|
|
|
|
// Init TWI (I2C)
|
|
//
|
|
void i2cInit()
|
|
{
|
|
TWBR = 92;
|
|
TWSR = 0;
|
|
TWDR = 0xFF;
|
|
PRR = 0;
|
|
}
|
|
|
|
//
|
|
// Set up specified PLL with mult, num and denom
|
|
// mult is 15..90
|
|
// num is 0..1,048,575 (0xFFFFF)
|
|
// denom is 0..1,048,575 (0xFFFFF)
|
|
//
|
|
void setupPLL(uint8_t pll, uint8_t mult, uint32_t num, uint32_t denom)
|
|
{
|
|
uint32_t P1; // PLL config register P1
|
|
uint32_t P2; // PLL config register P2
|
|
uint32_t P3; // PLL config register P3
|
|
|
|
P1 = (uint32_t)(128 * ((float)num / (float)denom));
|
|
P1 = (uint32_t)(128 * (uint32_t)(mult) + P1 - 512);
|
|
P2 = (uint32_t)(128 * ((float)num / (float)denom));
|
|
P2 = (uint32_t)(128 * num - denom * P2);
|
|
P3 = denom;
|
|
|
|
i2cSendRegister(pll + 0, (P3 & 0x0000FF00) >> 8);
|
|
i2cSendRegister(pll + 1, (P3 & 0x000000FF));
|
|
i2cSendRegister(pll + 2, (P1 & 0x00030000) >> 16);
|
|
i2cSendRegister(pll + 3, (P1 & 0x0000FF00) >> 8);
|
|
i2cSendRegister(pll + 4, (P1 & 0x000000FF));
|
|
i2cSendRegister(pll + 5, ((P3 & 0x000F0000) >> 12) | ((P2 &
|
|
0x000F0000) >> 16));
|
|
i2cSendRegister(pll + 6, (P2 & 0x0000FF00) >> 8);
|
|
i2cSendRegister(pll + 7, (P2 & 0x000000FF));
|
|
}
|
|
|
|
//
|
|
// Set up MultiSynth with integer Divider and R Divider
|
|
// R Divider is the bit value which is OR'ed onto the appropriate
|
|
// register, it is a #define in si5351a.h
|
|
//
|
|
void setupMultisynth(uint8_t synth, uint32_t Divider, uint8_t rDiv)
|
|
{
|
|
uint32_t P1; // Synth config register P1
|
|
uint32_t P2; // Synth config register P2
|
|
uint32_t P3; // Synth config register P3
|
|
|
|
P1 = 128 * Divider - 512;
|
|
P2 = 0; // P2 = 0, P3 = 1 forces an integer value for the Divider
|
|
P3 = 1;
|
|
|
|
i2cSendRegister(synth + 0, (P3 & 0x0000FF00) >> 8);
|
|
i2cSendRegister(synth + 1, (P3 & 0x000000FF));
|
|
i2cSendRegister(synth + 2, ((P1 & 0x00030000) >> 16) | rDiv);
|
|
i2cSendRegister(synth + 3, (P1 & 0x0000FF00) >> 8);
|
|
i2cSendRegister(synth + 4, (P1 & 0x000000FF));
|
|
i2cSendRegister(synth + 5, ((P3 & 0x000F0000) >> 12) | ((P2 &
|
|
0x000F0000) >> 16));
|
|
i2cSendRegister(synth + 6, (P2 & 0x0000FF00) >> 8);
|
|
i2cSendRegister(synth + 7, (P2 & 0x000000FF));
|
|
}
|
|
|
|
//
|
|
// Switches off Si5351a output
|
|
// Example: si5351aOutputOff(SI_CLK0_CONTROL);
|
|
// will switch off output CLK0
|
|
//
|
|
void si5351aOutputOff(uint8_t clk)
|
|
{
|
|
digitalWrite(TransmitLED, LOW);
|
|
i2cSendRegister(clk, 0x80); // Refer to SiLabs AN619 to see
|
|
//bit values - 0x80 turns off the output stage
|
|
}
|
|
|
|
|
|
|
|
|
|
//
|
|
// Set CLK0 output ON and to the specified frequency
|
|
// Frequency is in the range 10kHz to 150MHz and given in centiHertz (hundreds of Hertz)
|
|
// Example: si5351aSetFrequency(1000000200);
|
|
// will set output CLK0 to 10.000,002MHz
|
|
//
|
|
// This example sets up PLL A
|
|
// and MultiSynth 0
|
|
// and produces the output on CLK0
|
|
//
|
|
void si5351aSetFrequency(uint64_t frequency) //Frequency is in centiHz
|
|
{
|
|
static uint64_t oldFreq;
|
|
int32_t FreqChange;
|
|
uint64_t pllFreq;
|
|
uint32_t xtalFreq = XTAL_FREQ;
|
|
uint32_t l;
|
|
float f;
|
|
uint8_t mult;
|
|
uint32_t num;
|
|
uint32_t denom;
|
|
uint32_t Divider;
|
|
uint8_t rDiv;
|
|
|
|
digitalWrite(TransmitLED, HIGH);
|
|
// Serial.print (F("Freq is="));
|
|
// Serial.println (uint64ToStr(frequency,false));
|
|
if (frequency > 100000000) { //If higher than 1MHz then set output divider to 1
|
|
rDiv = SI_R_DIV_1;
|
|
Divider = 90000000000ULL / frequency;// Calculate the division ratio. 900MHz is the maximum internal (expressed as deciHz)
|
|
//Serial.print (F("Divider="));
|
|
//Serial.println (Divider);
|
|
pllFreq = Divider * frequency; // Calculate the pllFrequency:
|
|
//the Divider * desired output frequency
|
|
//Serial.print (F("pllFreq="));
|
|
//Serial.println (uint64ToStr(pllFreq,false));
|
|
mult = pllFreq / (xtalFreq * 100UL); // Determine the multiplier to
|
|
//Serial.print (F("mult="));
|
|
//Serial.println (mult);
|
|
|
|
//get to the required pllFrequency
|
|
l = pllFreq % (xtalFreq * 100UL); // It has three parts:
|
|
//Serial.print (F("l="));
|
|
//Serial.println (l);
|
|
f = l; // mult is an integer that must be in the range 15..90
|
|
//Serial.print (F("f="));
|
|
//Serial.println (f);
|
|
f *= 1048575; // num and denom are the fractional parts, the numerator and denominator
|
|
//Serial.print (F("f="));
|
|
//Serial.println (f);
|
|
f /= xtalFreq; // each is 20 bits (range 0..1048575)
|
|
//Serial.print (F("f="));
|
|
//Serial.println (f);
|
|
|
|
num = f; // the actual multiplier is mult + num / denom
|
|
//Serial.print (F("num="));
|
|
//Serial.println (num);
|
|
denom = 1048575; // For simplicity we set the denominator to the maximum 1048575
|
|
num = num / 100;
|
|
}
|
|
else // lower freq than 1MHz - use output Divider set to 128
|
|
{
|
|
rDiv = SI_R_DIV_128;
|
|
frequency = frequency * 128ULL; //Set base freq 128 times higher as we are dividing with 128 in the last output stage
|
|
Divider = 90000000000ULL / frequency;// Calculate the division ratio. 900,000,000 is the maximum internal
|
|
|
|
pllFreq = Divider * frequency; // Calculate the pllFrequency:
|
|
//the Divider * desired output frequency
|
|
mult = pllFreq / (xtalFreq * 100UL); // Determine the multiplier to
|
|
//get to the required pllFrequency
|
|
l = pllFreq % (xtalFreq * 100UL); // It has three parts:
|
|
//Serial.print (F("l="));
|
|
//Serial.println (l);
|
|
f = l; // mult is an integer that must be in the range 15..90
|
|
//Serial.print (F("f="));
|
|
//Serial.println (f);
|
|
f *= 1048575; // num and denom are the fractional parts, the numerator and denominator
|
|
//Serial.print (F("f="));
|
|
//Serial.println (f);
|
|
f /= xtalFreq; // each is 20 bits (range 0..1048575)
|
|
//Serial.print (F("f="));
|
|
//Serial.println (f);
|
|
|
|
num = f; // the actual multiplier is mult + num / denom
|
|
//Serial.print (F("num="));
|
|
//Serial.println (num);
|
|
denom = 1048575; // For simplicity we set the denominator to the maximum 1048575
|
|
num = num / 100;
|
|
}
|
|
|
|
|
|
// Set up PLL A with the calculated multiplication ratio
|
|
setupPLL(SI_SYNTH_PLL_A, mult, num, denom);
|
|
|
|
// Set up MultiSynth Divider 0, with the calculated Divider.
|
|
// The final R division stage can divide by a power of two, from 1..128.
|
|
// reprented by constants SI_R_DIV1 to SI_R_DIV128 (see si5351a.h header file)
|
|
// If you want to output frequencies below 1MHz, you have to use the
|
|
// final R division stage
|
|
setupMultisynth(SI_SYNTH_MS_0, Divider, rDiv);
|
|
|
|
// Reset the PLL. This causes a glitch in the output. For small changes to
|
|
// the parameters, you don't need to reset the PLL, and there is no glitch
|
|
FreqChange = frequency - oldFreq;
|
|
|
|
if ( abs(FreqChange) > 100000) //If changed more than 1kHz then reset PLL (completely arbitrary choosen)
|
|
{
|
|
i2cSendRegister(SI_PLL_RESET, 0xA0);
|
|
}
|
|
|
|
// Finally switch on the CLK0 output (0x4F)
|
|
// and set the MultiSynth0 input to be PLL A
|
|
i2cSendRegister(SI_CLK0_CONTROL, 0x4F | SI_CLK_SRC_PLL_A);
|
|
oldFreq = frequency;
|
|
}
|
|
|
|
/*
|
|
uint64_t StrTouint64_t (String InString)
|
|
{
|
|
uint64_t y = 0;
|
|
|
|
for (int i = 0; i < InString.length(); i++) {
|
|
char c = InString.charAt(i);
|
|
if (c < '0' || c > '9') break;
|
|
y *= 10;
|
|
y += (c - '0');
|
|
}
|
|
return y;
|
|
}
|
|
*/
|
|
|
|
String uint64ToStr (uint64_t p_InNumber, boolean p_LeadingZeros)
|
|
{
|
|
char l_HighBuffer[7]; //6 digits + null terminator char
|
|
char l_LowBuffer[7]; //6 digits + null terminator char
|
|
char l_ResultBuffer [13]; //12 digits + null terminator char
|
|
String l_ResultString = "";
|
|
uint8_t l_Digit;
|
|
|
|
sprintf(l_HighBuffer, "%06lu", p_InNumber / 1000000L); //Convert high part of 64bit unsigned integer to char array
|
|
sprintf(l_LowBuffer, "%06lu", p_InNumber % 1000000L); //Convert low part of 64bit unsigned integer to char array
|
|
l_ResultString = l_HighBuffer;
|
|
l_ResultString = l_ResultString + l_LowBuffer; //Copy the 2 part result to a string
|
|
|
|
if (!p_LeadingZeros) //If leading zeros should be romeved
|
|
{
|
|
l_ResultString.toCharArray(l_ResultBuffer, 13);
|
|
for (l_Digit = 0; l_Digit < 12; l_Digit++ )
|
|
{
|
|
if (l_ResultBuffer[l_Digit] == '0')
|
|
{
|
|
l_ResultBuffer[l_Digit] = ' '; // replace zero with a space character
|
|
}
|
|
else
|
|
{
|
|
break; //We have found all the leading Zeros, exit loop
|
|
}
|
|
}
|
|
l_ResultString = l_ResultBuffer;
|
|
l_ResultString.trim();//Remove all leading spaces
|
|
}
|
|
return l_ResultString;
|
|
}
|
|
|
|
|
|
boolean NoBandEnabled(void)
|
|
{
|
|
boolean NoOne = true;
|
|
for (int FreqLoop = 0; FreqLoop < 13; FreqLoop++) {
|
|
if (TXOnBand[FreqLoop]) NoOne = false;
|
|
}
|
|
return NoOne;
|
|
}
|
|
|
|
uint64_t NextFreq (void)
|
|
{
|
|
if (NoBandEnabled())
|
|
{
|
|
freq = 0;
|
|
}
|
|
else
|
|
{
|
|
do
|
|
{
|
|
CurrentBand++;
|
|
if (CurrentBand > 12) CurrentBand = 0;
|
|
} while (TXOnBand[CurrentBand] == false);
|
|
|
|
switch (CurrentBand) {
|
|
case 0:
|
|
freq = WSPR_FREQ2190m;
|
|
break;
|
|
case 1:
|
|
freq = WSPR_FREQ630m;
|
|
break;
|
|
case 2:
|
|
freq = WSPR_FREQ160m ;
|
|
break;
|
|
case 3:
|
|
freq = WSPR_FREQ80m ;
|
|
break;
|
|
case 4:
|
|
freq = WSPR_FREQ40m ;
|
|
break;
|
|
case 5:
|
|
freq = WSPR_FREQ30m ;
|
|
break;
|
|
case 6:
|
|
freq = WSPR_FREQ20m ;
|
|
break;
|
|
case 7:
|
|
freq = WSPR_FREQ17m ;
|
|
break;
|
|
case 8:
|
|
freq = WSPR_FREQ15m ;
|
|
break;
|
|
case 9:
|
|
freq = WSPR_FREQ12m ;
|
|
break;
|
|
case 10:
|
|
freq = WSPR_FREQ10m ;
|
|
break;
|
|
case 11:
|
|
freq = WSPR_FREQ6m ;
|
|
break;
|
|
case 12:
|
|
freq = WSPR_FREQ4m ;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
boolean LastFreq (void)
|
|
{
|
|
boolean Last = true;
|
|
int TestBand;
|
|
|
|
TestBand = CurrentBand;
|
|
if (TestBand == 12)
|
|
{
|
|
Last = true;
|
|
}
|
|
else
|
|
{
|
|
do
|
|
{
|
|
TestBand++;
|
|
if (TXOnBand[TestBand]) Last = false;
|
|
} while (TestBand < 12);
|
|
}
|
|
return Last;
|
|
}
|
|
|
|
/*
|
|
void UpdatePos (void)
|
|
{
|
|
double Lat;
|
|
double Lon;
|
|
while (GPSSerial.available()) {
|
|
gps.encode(GPSSerial.read());
|
|
if (gps.location.isUpdated())
|
|
{
|
|
|
|
//Lat = gps.location.lat();
|
|
//Lon = gps.location.lng();
|
|
calcLocator (gps.location.lat(), gps.location.lng());
|
|
//Serial.print (F("GPS Fix accuired - Maidenhead locator is "));
|
|
//Serial.print(MHLocator);
|
|
loc[0] = MHLocator[0]; loc[1] = MHLocator[1]; loc[2] = MHLocator[2]; loc[3] = MHLocator[3];
|
|
//Serial.print (F(" (using "));
|
|
//Serial.print(loc);
|
|
//Serial.println (F(")"));
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
*/
|
|
|
|
//Create a random seed by doing CRC32 on 100 analog values from port A0
|
|
unsigned long RandomSeed(void) {
|
|
|
|
const unsigned long crc_table[16] = {
|
|
0x00000000, 0x1db71064, 0x3b6e20c8, 0x26d930ac,
|
|
0x76dc4190, 0x6b6b51f4, 0x4db26158, 0x5005713c,
|
|
0xedb88320, 0xf00f9344, 0xd6d6a3e8, 0xcb61b38c,
|
|
0x9b64c2b0, 0x86d3d2d4, 0xa00ae278, 0xbdbdf21c
|
|
};
|
|
|
|
uint8_t ByteVal;
|
|
unsigned long crc = ~0L;
|
|
|
|
for (int index = 0 ; index<100 ; ++index) {
|
|
ByteVal= analogRead(A0);
|
|
crc = crc_table[(crc ^ ByteVal) & 0x0f] ^ (crc >> 4);
|
|
crc = crc_table[(crc ^ (ByteVal >> 4)) & 0x0f] ^ (crc >> 4);
|
|
crc = ~crc;
|
|
}
|
|
return crc;
|
|
}
|