WSPR-TX Pico Transmitter

Go to file

Harry 50436b3f13 SPECIAL VERSION FOR EXTERNAL FREQUENCY DIVISION This is a special experimental version that requires an external divider on the output. This can be useful in the following two scenarios: 1 For generating baseband WSPR e.g 1500Hz for direct input to microphone input on a transmitter or for modulating a laser. 2 For users with special amplifiers on LF and MF that divides the signal by two as part of the switched amplifier. The division rate is configurable with the constant ExtDivision In WSPR Beacon mode the band settings will be used but the output frequency will always be multiplied by the ExtDivision The WSPR symbol shift is also multiplied so instead of the normal shift of 1.46Hz per symbol it will be 1.46Hz * ExtDivision The signal generator works as normal, e.g setting it to 1MHz will output 1MHz		2020-06-07 14:43:03 +02:00
Custom Firmwares	SPECIAL VERSION FOR EXTERNAL FREQUENCY DIVISION	2020-06-07 14:43:03 +02:00
Documentation	Describes the Serial API used between the Configuration software and the WSPR transmitters	2020-01-04 22:43:40 +01:00
Factory Config	Added WSPR Mini Image. Only displays one LP filter option for Mini and LP1	2019-07-17 16:30:11 +02:00
Hardcoded Info Firmware (depriciated)/Release	Add files via upload	2018-08-26 23:11:06 +02:00
PC Software	Changed some stuff to avid memory leaks.	2020-03-14 21:04:48 +01:00
Standard Firmware	0.88 Support for LP1 addon card BLP4, prod model #1029 , adjusted Low passfilter calculation in FreqToBand ()	2020-05-13 14:37:52 +02:00
LICENSE	Initial commit	2018-07-23 19:52:21 +02:00
README.md	Update README.md	2020-05-13 14:39:25 +02:00

README.md

1011 WSPR-TX_LP1

1012 WSPR-TX Desktop Transmitter

1017 WSPR-TX Mini

1020 WSPR-TX_LP1 with Mezzanine LP4 card

1028 WSPR-TX Pico

Arduino firmware and PC executable for my WSPR transmitters. More info at www.zachtek.com