Harry
0977a5a340
Version 0.79 for the WSPR TX Pico
2019-10-01 19:48:09 +02:00
Harry
7a017e6980
Version 0.79 for the WSPR TX_LP1 with Mezzanine LP4 card
2019-10-01 19:47:31 +02:00
Harry
3e0b5093af
Version 0.79 for the WSPR TX Mini
2019-10-01 19:46:39 +02:00
Harry
1e0a0e2f08
Version 0.79 for the WSPR TX DEsktop model
2019-10-01 19:45:29 +02:00
Harry
c88c935be9
Version 0.79 for the WSPR TX_LP1 model
2019-10-01 19:40:16 +02:00
Harry
f3667ef7d0
Bug fixes and support for new hardware
...
0.76 Added Support for WSPR-TX Pico, GPS position updates in idle and signal gen mode, status LED now fast blink during WSPR Beacon TX instead of steady lit
The Pico will always boot in to WSPR Beacon regardless of Boot configuration, this is a failsafe.
Moved check if Call Sign is set from SendWSPRBlock() to DoWSPR()
0.77 Changed around the orders of hardware check in Setup()
0.78 The WSPR Beacon will now stay in Beacon mode even if the user changed something in the PC GUI like changed bands, click Save button etc
0.79 Support the new Desktop V1R10 with new improved LP filters. Fixed TX Pause limit of 32000, it can now go to 99999 seconds (27.7 Hours)
2019-10-01 18:58:15 +02:00
Harry
59b5341c15
Version 0.75 for the WSPR TX Mini
2019-07-15 22:43:26 +02:00
Harry
cf9200fd0e
Version 0.75 for the WSPR TX-LP1 With Mezzanine LP4 add-on
2019-07-15 22:42:52 +02:00
Harry
c522532769
Version 0.75 for the WSPR TX_LP1 model
2019-07-15 22:42:08 +02:00
Harry
bcf6a49c11
Delete WSPR-TX_LP1 with Mezzanine LP4 card Firmware WSPR-TX0.75.ino.hex
2019-07-15 22:40:55 +02:00
Harry
a2179a4929
Delete WSPR-TX_LP1 Firmware WSPR-TX0.75.ino.hex
2019-07-15 22:40:40 +02:00
Harry
396ce322ea
Delete WSPR-TX Mini Firmware WSPR-TX0.75.ino.hex
2019-07-15 22:39:39 +02:00
Harry
9a97187c94
Delete WSPR-TX Desktop Firmware WSPR-TX0.75.ino.hex
2019-07-15 22:39:24 +02:00
Harry
1d3fdb1fe3
Version 0.75 for the WSPR TX Desktop model,
2019-07-15 22:38:25 +02:00
Harry
ad29a9d595
Added voltage info from the microcontroller , some improvement in idle mode
...
Added MCU VCC Voltage info, added support for Pico model, Sends less GPS info in Idle mode
2019-07-15 15:31:58 +02:00
Harry
0eed8a0e72
Version 0.75 for the WSPR TX_LP1 with Mezzanine LP4 add-on
2019-07-15 15:20:55 +02:00
Harry
5c13268c08
Version 0.75 for the WSPR TX_LP1 model
2019-07-15 15:19:51 +02:00
Harry
0efac1d71e
Version 0.75 for the WSPR TX Mini
2019-07-15 15:19:20 +02:00
Harry
3072c78fa7
Version 0.75 for the WSPR TX Desktop model,
2019-07-15 15:18:46 +02:00
Harry
53a86f780b
Delete WSPR-TX_LP1 with Mezzanine LP4 card Firmware WSPR-TX0.75.ino.hex
2019-07-15 15:14:40 +02:00
Harry
750a6cc740
Delete WSPR-TX_LP1 Firmware WSPR-TX0.75.ino.hex
2019-07-15 15:14:30 +02:00
Harry
1b8afbacda
Delete WSPR-TX Mini Firmware WSPR-TX0.75.ino.hex
2019-07-15 15:14:14 +02:00
Harry
1b9af74a0c
Delete WSPR-TX Desktop Firmware WSPR-TX0.75.ino.hex
2019-07-15 15:14:02 +02:00
Harry
4518df7e6e
Xloader for uploading of Hex files
2019-07-15 15:09:46 +02:00
Harry
0e557ae3d9
Improvement in responsiveness. Additional power savings for the WSPR Mini
...
Improvement in GUI responsiveness when in WSPR Beacon. Additional power saving for the Mini, MCU goes to sleep if TX pause is longer than a minute.
2019-07-15 12:13:03 +02:00
Harry
cdb12ccb24
Delete WSPR-TX0.75.ino
2019-07-15 12:11:53 +02:00
Harry
60ba35111d
Improvement in responsiveness, Additional WSPR Mini power saving
...
Improvement in GUI responsiveness when in WSPR Beacon. Additional power saving for the Mini, MCU goes to sleep if TX pause is longer than a minute.
2019-07-15 12:11:18 +02:00
Harry
32a1177f3c
Hex files for all the WSPR transmitter models
2019-07-15 12:07:16 +02:00
Harry
b533e1b093
Sends Satellite infromation so the PC program can display a GPS Quality meter.
...
Sends Satellite positions and their received SNR to the config program, changed to NeoGPS library
2019-06-29 16:41:50 +02:00
Harry
a350d412ca
More frequent GPS updates to the PC software, Power saving improvements on the WSPR TX Mini
...
0.72 Sends GPS updates when in Idle and Signal gen mode and when pausing in WSRP Beacon mode. Improved Serial port respons when pausing in WSPR Beacon mode,
On the Mini the GPS and the Si5351 is put to power save during long TX Pauses. Current draw is now arround 40 mA regardless if tranmitting or not.
2019-06-29 16:30:06 +02:00
Harry
0e4319756a
Power saving in the WSPR Mini.
...
0.69 Added support for hardware WSPR-TX Mini 1021, added funtion readVcc() that returs Arduino Voltage, added PowerSave funtions save current on the Mini
0.70 Added power saving for the Mini, GPS turned off if TX pause is longer than a minute.
0.71 Corrected 2m Frequency, not in use but nice to have correct. Enabled PLL power saving for the Mini if TX pause is longer than a minute. Current draw for mini is: 40mA waiting to TX, 60mA TX, 5mA during long TX pauses (More than a minute)
2019-04-24 20:59:16 +02:00
Harry
7ee71391ae
0.68 Added support for manual override relay control
...
0.68 Added support for manual override relay control over the Serial API and Relay update messages. ([CSL] command and {LPI} status message, shortened Start LED Blink
2019-02-07 15:31:56 +01:00
Harry
7cb2baa716
Added support for the Mezzanine LP4 add-on board when fitted to WSPR-TX_LP1. Use
2019-01-14 20:01:00 +01:00
Harry
fff29d21c8
0.65 Fixed bug that forced Hardware Revision to 4
2018-12-09 18:33:09 +01:00
Harry
ae3c521e48
0.64 Added function BandNumOfHigestLP to find the bandnumber of higest fitted LP filter, expanded on the PickLP filter routine
2018-11-08 19:51:03 +01:00
Harry
a0547208f2
Firmware for both the WSPR-TX_LP1 and the WSPR Desktop transmitter
...
Please note that you need to set the "Product_Model" constant on line 36 to the correct value before compiling.
2018-11-08 18:06:00 +01:00
Harry
9dbdafdebb
0.60 Fixed wrong TX Freq on 10,12 and 15 Band
2018-10-26 18:24:48 +02:00
Harry
05f676b3bb
Delete WSPR_TX_LP1_Firmware0.60.ino
2018-10-26 18:20:29 +02:00
Harry
108e1e04d5
0.60 Fixed wrong TX Freq on 10,12 and 15 Band
2018-10-26 18:19:18 +02:00
Harry
b6b5fad105
0.59 Fixed dim Red TX LED
...
0.59 Fixed dim Red TX LED, (Pin was not set to output by setup routine)
2018-10-12 10:46:39 +02:00
Harry
6aea980e5a
Delete How to uppdate the firmware in the WSPR-TX_LP1 Transmitter.pdf
2018-09-20 18:07:58 +02:00
Harry
db156f976c
Instructions on how to upgrade the firmware using the Arduino IDE
2018-09-20 18:05:54 +02:00
Harry
9c821885f1
Rename StandardFirmware_Beta0.52.ino to WSPR_TX_LP1_Firmware0.52.ino
2018-09-20 14:43:11 +02:00
Harry
06dc4dbd23
Rename StandardFirmware_Beta0.54.ino to WSPR_TX_LP1_Firmware0.54.ino
2018-09-20 14:42:41 +02:00
Harry
e45a2ec216
Rename StandardFirmware_Beta0.55.ino to WSPR_TX_LP1_Firmware0.55.ino
2018-09-20 14:42:09 +02:00
Harry
287c8967e7
Rename StandardFirmware_Beta0.56.ino to WSPR_TX_LP1_Firmware0.56.ino
2018-09-20 14:41:35 +02:00
Harry
c400a00617
Rename WSPR_TX_LP1_StandardFirmware_Beta0.57.ino to WSPR_TX_LP1_Firmware0.57.ino
2018-09-20 14:41:12 +02:00
Harry
0bcb07d8e8
Rename WSPR_TX_LP1_StandardFirmware_Beta0.58.ino to WSPR_TX_LP1_Firmware0.58.ino
2018-09-20 14:40:53 +02:00
Harry
e9a9b4f15d
Fixed frequency error in the info sent to serial port if Freq was <1MHz
...
The correct Frequency was outputted to the RF port below 1MHz but the information sent to the serial port was incorrect.
2018-09-20 14:39:24 +02:00
Harry
1fa11cc004
Small changes in product model handling
...
0.57 Split Firmware in to two separate version for the WSPR-TX_ LP1 and LP4 products and changed the "Product_Model" from Factory EEPROM data to constant
2018-09-14 12:49:38 +02:00