Open source version of the STMicroelectronics STLINK Tools
Zaktualizowano
decoder for radiosonde RS41, RS92, DFM06/09/17, M10/M20, and MP3H based on a TTGO LoRa ESP32 board.
Zaktualizowano
Arduino Library for Flip-disc Displays. The library allows you to easily control flip-disc displays connected in series. You can connect up to 8 different displays in any order. This library is intended for use with the displays designed by www.Flipo.io - Marcin Saj.
Zaktualizowano
The LoRa APRS iGate will work with very cheep hardware which you can buy from amazon, ebay or aliexpress. Try it out and be part of the APRS network. TTGO LoRa32
Zaktualizowano
A TX-only TNC (Terminal Node Controller) to generate the AFSK (Audio Frequency-Shift Keying) audio tones for APRS (Automatic Packet Reporting System) messages using a RP2040 microcontroller on a Raspberry Pi Pico board.
Zaktualizowano
FM Transmitter. Use the Raspberry Pi as an FM transmitter. Works on every Raspberry Pi board.
Zaktualizowano
This version of Grbl runs on a STM32F411RE / STM32F446RE Nucleo Board
Zaktualizowano
The LoRa APRS Tracker will work with TTGO T-Beam V0.7 (433MHz SX1278) TTGO T-Beam V1 (433MHz SX1278)
Zaktualizowano
The easy DIY 5x5 elements 100 Watt automatic antenna tuner
Zaktualizowano
WSPR beacon for Raspberry Pi Pico, based on pico-hf-oscillator library. It doesn't require any hardware - Pico board itself only.
Zaktualizowano
OGN Tracker implementation on ESP32 devices. It works with HELTEC and TTGO boards with sx1276 RF chip for 868/915MHz
Zaktualizowano
SSTV transmitter board provides a Slow-scan Television (SSTV) signal generator with PSK/CW telemetry, APRS uplink, and camera module. It is based on STM32F446RET6 microcontroller.
Zaktualizowano
The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3. It omits the battery charging and Bluetooth components of the TNC3.
Zaktualizowano
micropyGPS is a full featured GPS NMEA sentence parser for use with MicroPython and the PyBoard embedded platform. It's also fully compatible with Python 3.x
Zaktualizowano
collection of Arduino sketch examples of transmitting on the Helium network with several LoRaWAN development boards.
Zaktualizowano
This is a driver for the Bosch BME280 temperature/pressure/humidity sensor, for use with MicroPython on ESP8266 boards
Zaktualizowano
Embroiderino is a test project which aims at providing all needed to turn an ordinary sewing machine into digital embroidery machine or at least to reuse any other embroidery machine with mainboard failure.
Zaktualizowano